From: Stefan Agner <stefan@agner.ch>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 1/6] Convert CONFIG_FSL_DCU_FB to Kconfig
Date: Tue, 11 Apr 2017 09:58:31 -0700 [thread overview]
Message-ID: <63ba64f308f5ceeebcfb37a7a9ededde@agner.ch> (raw)
In-Reply-To: <3e3405f3d6adbbcfe48307d876e40726910566fe.1491887884.git.maitysanchayan@gmail.com>
On 2017-04-10 22:42, Sanchayan Maity wrote:
> Rename CONFIG_FSL_DCU_FB to CONFIG_VIDEO_FSL_DCU_FB
> and convert it to Kconfig.
Looks good to me.
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
--
Stefan
>
> Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
> ---
> arch/arm/cpu/armv7/ls102xa/soc.c | 2 +-
> board/freescale/ls1021aiot/Makefile | 2 +-
> board/freescale/ls1021aqds/Makefile | 2 +-
> board/freescale/ls1021atwr/Makefile | 2 +-
> configs/ls1021aqds_ddr4_nor_defconfig | 1 +
> configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 1 +
> configs/ls1021aqds_nand_defconfig | 1 +
> configs/ls1021aqds_nor_SECURE_BOOT_defconfig | 1 +
> configs/ls1021aqds_nor_defconfig | 1 +
> configs/ls1021aqds_nor_lpuart_defconfig | 1 +
> configs/ls1021aqds_qspi_defconfig | 1 +
> configs/ls1021aqds_sdcard_ifc_defconfig | 1 +
> configs/ls1021aqds_sdcard_qspi_defconfig | 1 +
> configs/ls1021atwr_nor_SECURE_BOOT_defconfig | 1 +
> configs/ls1021atwr_nor_defconfig | 1 +
> configs/ls1021atwr_nor_lpuart_defconfig | 1 +
> configs/ls1021atwr_qspi_defconfig | 1 +
> configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig | 1 +
> configs/ls1021atwr_sdcard_ifc_defconfig | 1 +
> configs/ls1021atwr_sdcard_qspi_defconfig | 1 +
> drivers/video/Kconfig | 7 +++++++
> drivers/video/Makefile | 2 +-
> include/configs/ls1021aqds.h | 4 +---
> include/configs/ls1021atwr.h | 4 +---
> scripts/config_whitelist.txt | 1 -
> 25 files changed, 30 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/cpu/armv7/ls102xa/soc.c b/arch/arm/cpu/armv7/ls102xa/soc.c
> index 52fb6f8d51..b84a1a686a 100644
> --- a/arch/arm/cpu/armv7/ls102xa/soc.c
> +++ b/arch/arm/cpu/armv7/ls102xa/soc.c
> @@ -91,7 +91,7 @@ int arch_soc_init(void)
> out_be32(&scfg->qspi_cfg, SCFG_QSPI_CLKSEL);
> #endif
>
> -#ifdef CONFIG_FSL_DCU_FB
> +#ifdef CONFIG_VIDEO_FSL_DCU_FB
> out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN);
> #endif
>
> diff --git a/board/freescale/ls1021aiot/Makefile
> b/board/freescale/ls1021aiot/Makefile
> index 05709e685c..6b960aa61c 100644
> --- a/board/freescale/ls1021aiot/Makefile
> +++ b/board/freescale/ls1021aiot/Makefile
> @@ -5,5 +5,5 @@
> #
>
> obj-y += ls1021aiot.o
> -obj-$(CONFIG_FSL_DCU_FB) += dcu.o
> +obj-$(CONFIG_VIDEO_FSL_DCU_FB) += dcu.o
> obj-$(CONFIG_ARMV7_PSCI) += psci.o
> diff --git a/board/freescale/ls1021aqds/Makefile
> b/board/freescale/ls1021aqds/Makefile
> index f0390c129f..1e50e468a3 100644
> --- a/board/freescale/ls1021aqds/Makefile
> +++ b/board/freescale/ls1021aqds/Makefile
> @@ -7,5 +7,5 @@
> obj-y += ls1021aqds.o
> obj-y += ddr.o
> obj-y += eth.o
> -obj-$(CONFIG_FSL_DCU_FB) += dcu.o
> +obj-$(CONFIG_VIDEO_FSL_DCU_FB) += dcu.o
> obj-$(CONFIG_ARMV7_PSCI) += psci.o
> diff --git a/board/freescale/ls1021atwr/Makefile
> b/board/freescale/ls1021atwr/Makefile
> index 5238b158d7..d9a2f52f2b 100644
> --- a/board/freescale/ls1021atwr/Makefile
> +++ b/board/freescale/ls1021atwr/Makefile
> @@ -5,5 +5,5 @@
> #
>
> obj-y += ls1021atwr.o
> -obj-$(CONFIG_FSL_DCU_FB) += dcu.o
> +obj-$(CONFIG_VIDEO_FSL_DCU_FB) += dcu.o
> obj-$(CONFIG_ARMV7_PSCI) += psci.o
> diff --git a/configs/ls1021aqds_ddr4_nor_defconfig
> b/configs/ls1021aqds_ddr4_nor_defconfig
> index 8434870af3..5566053ae9 100644
> --- a/configs/ls1021aqds_ddr4_nor_defconfig
> +++ b/configs/ls1021aqds_ddr4_nor_defconfig
> @@ -43,3 +43,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> index ece220bf94..9582662e53 100644
> --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> @@ -44,3 +44,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021aqds_nand_defconfig
> b/configs/ls1021aqds_nand_defconfig
> index dc547b5e0d..73f2fb070d 100644
> --- a/configs/ls1021aqds_nand_defconfig
> +++ b/configs/ls1021aqds_nand_defconfig
> @@ -57,3 +57,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
> b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
> index d1760ed742..74e1241974 100644
> --- a/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
> +++ b/configs/ls1021aqds_nor_SECURE_BOOT_defconfig
> @@ -43,5 +43,6 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> CONFIG_RSA=y
> CONFIG_SPL_RSA=y
> diff --git a/configs/ls1021aqds_nor_defconfig b/configs/ls1021aqds_nor_defconfig
> index 8de90b0757..14a2b7f562 100644
> --- a/configs/ls1021aqds_nor_defconfig
> +++ b/configs/ls1021aqds_nor_defconfig
> @@ -44,3 +44,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021aqds_nor_lpuart_defconfig
> b/configs/ls1021aqds_nor_lpuart_defconfig
> index a9efdc56ac..9ed301cedd 100644
> --- a/configs/ls1021aqds_nor_lpuart_defconfig
> +++ b/configs/ls1021aqds_nor_lpuart_defconfig
> @@ -45,3 +45,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021aqds_qspi_defconfig
> b/configs/ls1021aqds_qspi_defconfig
> index 735f517cf9..9ec21c58a3 100644
> --- a/configs/ls1021aqds_qspi_defconfig
> +++ b/configs/ls1021aqds_qspi_defconfig
> @@ -50,3 +50,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021aqds_sdcard_ifc_defconfig
> b/configs/ls1021aqds_sdcard_ifc_defconfig
> index 027d368157..492676a2c1 100644
> --- a/configs/ls1021aqds_sdcard_ifc_defconfig
> +++ b/configs/ls1021aqds_sdcard_ifc_defconfig
> @@ -55,3 +55,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig
> b/configs/ls1021aqds_sdcard_qspi_defconfig
> index f9ea99bac1..ed0b17be7c 100644
> --- a/configs/ls1021aqds_sdcard_qspi_defconfig
> +++ b/configs/ls1021aqds_sdcard_qspi_defconfig
> @@ -61,3 +61,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
> b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
> index 5b6ca220b3..6af8dbd928 100644
> --- a/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
> +++ b/configs/ls1021atwr_nor_SECURE_BOOT_defconfig
> @@ -42,5 +42,6 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> CONFIG_RSA=y
> CONFIG_SPL_RSA=y
> diff --git a/configs/ls1021atwr_nor_defconfig b/configs/ls1021atwr_nor_defconfig
> index 3fb507f18c..93b646796b 100644
> --- a/configs/ls1021atwr_nor_defconfig
> +++ b/configs/ls1021atwr_nor_defconfig
> @@ -42,3 +42,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021atwr_nor_lpuart_defconfig
> b/configs/ls1021atwr_nor_lpuart_defconfig
> index 725720d3f4..c176e8377a 100644
> --- a/configs/ls1021atwr_nor_lpuart_defconfig
> +++ b/configs/ls1021atwr_nor_lpuart_defconfig
> @@ -43,3 +43,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021atwr_qspi_defconfig
> b/configs/ls1021atwr_qspi_defconfig
> index 46f7e26d8f..548d574fa0 100644
> --- a/configs/ls1021atwr_qspi_defconfig
> +++ b/configs/ls1021atwr_qspi_defconfig
> @@ -50,3 +50,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
> b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
> index 783787afff..bd001700a5 100644
> --- a/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
> +++ b/configs/ls1021atwr_sdcard_ifc_SECURE_BOOT_defconfig
> @@ -57,5 +57,6 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> CONFIG_RSA=y
> CONFIG_SPL_RSA=y
> diff --git a/configs/ls1021atwr_sdcard_ifc_defconfig
> b/configs/ls1021atwr_sdcard_ifc_defconfig
> index b558e838fa..107011163c 100644
> --- a/configs/ls1021atwr_sdcard_ifc_defconfig
> +++ b/configs/ls1021atwr_sdcard_ifc_defconfig
> @@ -54,3 +54,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/configs/ls1021atwr_sdcard_qspi_defconfig
> b/configs/ls1021atwr_sdcard_qspi_defconfig
> index ef073759ba..5eddabd020 100644
> --- a/configs/ls1021atwr_sdcard_qspi_defconfig
> +++ b/configs/ls1021atwr_sdcard_qspi_defconfig
> @@ -61,3 +61,4 @@ CONFIG_USB_XHCI_HCD=y
> CONFIG_USB_XHCI_DWC3=y
> CONFIG_USB_STORAGE=y
> # CONFIG_VIDEO_SW_CURSOR is not set
> +CONFIG_VIDEO_FSL_DCU_FB=y
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 2069576958..6aab8af1b3 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -395,6 +395,13 @@ config VIDEO_IVYBRIDGE_IGD
> a special tool which configures the VGA ROM, but the graphics
> resolution can be selected in U-Boot.
>
> +config VIDEO_FSL_DCU_FB
> + bool "Enable Freescale Display Control Unit"
> + depends on VIDEO
> + help
> + This enables support for Freescale Display Control Unit (DCU4)
> + module found on Freescale Vybrid and QorIQ family of SoCs.
> +
> config VIDEO_ROCKCHIP
> bool "Enable Rockchip video support"
> depends on DM_VIDEO
> diff --git a/drivers/video/Makefile b/drivers/video/Makefile
> index db34904a9a..7cd6d28658 100644
> --- a/drivers/video/Makefile
> +++ b/drivers/video/Makefile
> @@ -27,7 +27,7 @@ obj-$(CONFIG_ATMEL_HLCD) += atmel_hlcdfb.o
> obj-$(CONFIG_ATMEL_LCD) += atmel_lcdfb.o
> obj-$(CONFIG_CFB_CONSOLE) += cfb_console.o
> obj-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o
> -obj-$(CONFIG_FSL_DCU_FB) += fsl_dcu_fb.o videomodes.o
> +obj-$(CONFIG_VIDEO_FSL_DCU_FB) += fsl_dcu_fb.o videomodes.o
> obj-$(CONFIG_L5F31188) += l5f31188.o
> obj-$(CONFIG_MPC8XX_LCD) += mpc8xx_lcd.o
> obj-$(CONFIG_PXA_LCD) += pxa_lcd.o
> diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
> index b349b367eb..97b81274b0 100644
> --- a/include/configs/ls1021aqds.h
> +++ b/include/configs/ls1021aqds.h
> @@ -421,9 +421,7 @@ unsigned long get_board_ddr_clk(void);
> /*
> * Video
> */
> -#define CONFIG_FSL_DCU_FB
> -
> -#ifdef CONFIG_FSL_DCU_FB
> +#ifdef CONFIG_VIDEO_FSL_DCU_FB
> #define CONFIG_CMD_BMP
> #define CONFIG_VIDEO_LOGO
> #define CONFIG_VIDEO_BMP_LOGO
> diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
> index fcf035b86a..a60b4b2990 100644
> --- a/include/configs/ls1021atwr.h
> +++ b/include/configs/ls1021atwr.h
> @@ -300,9 +300,7 @@
> /*
> * Video
> */
> -#define CONFIG_FSL_DCU_FB
> -
> -#ifdef CONFIG_FSL_DCU_FB
> +#ifdef CONFIG_VIDEO_FSL_DCU_FB
> #define CONFIG_CMD_BMP
> #define CONFIG_VIDEO_LOGO
> #define CONFIG_VIDEO_BMP_LOGO
> diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
> index 330bc5897a..9d238bd443 100644
> --- a/scripts/config_whitelist.txt
> +++ b/scripts/config_whitelist.txt
> @@ -1041,7 +1041,6 @@ CONFIG_FSLDMAFEC
> CONFIG_FSL_CADMUS
> CONFIG_FSL_CORENET
> CONFIG_FSL_CPLD
> -CONFIG_FSL_DCU_FB
> CONFIG_FSL_DCU_SII9022A
> CONFIG_FSL_DDR_BIST
> CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
next prev parent reply other threads:[~2017-04-11 16:58 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-11 5:42 [U-Boot] [PATCH v3 0/6] Introduce DCU support for Vybrid Sanchayan Maity
2017-04-11 5:42 ` [U-Boot] [PATCH v3 1/6] Convert CONFIG_FSL_DCU_FB to Kconfig Sanchayan Maity
2017-04-11 16:58 ` Stefan Agner [this message]
2017-04-12 7:18 ` Alison Wang
2017-04-11 5:42 ` [U-Boot] [PATCH v3 2/6] video: fsl_dcu_fb: fix framebuffer to the end of memory Sanchayan Maity
2017-04-11 5:42 ` [U-Boot] [PATCH v3 3/6] video: fsl_dcu_fb: Enable pixel clock after initialization Sanchayan Maity
2017-04-12 7:47 ` Alison Wang
2017-04-11 5:42 ` [U-Boot] [PATCH v3 4/6] video: fsl_dcu_fb: Fix DCU_MODE_BLEND_ITER setting Sanchayan Maity
2017-04-11 5:42 ` [U-Boot] [PATCH v3 5/6] video: fsl_dcu_fb: add additional modes for DCU Sanchayan Maity
2017-04-12 7:57 ` Alison Wang
2017-04-11 5:42 ` [U-Boot] [PATCH v3 6/6] board: toradex: colibri_vf: Add DCU support for Colibri Vybrid Sanchayan Maity
2017-04-12 16:14 ` Stefano Babic
2017-04-12 17:53 ` Stefan Agner
2017-04-14 13:37 ` Anatolij Gustschin
2017-04-11 16:59 ` [U-Boot] [PATCH v3 0/6] Introduce DCU support for Vybrid Stefan Agner
2017-04-12 8:45 ` Stefano Babic
2017-04-14 13:39 ` Anatolij Gustschin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=63ba64f308f5ceeebcfb37a7a9ededde@agner.ch \
--to=stefan@agner.ch \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.