Re: Critical Interrupt Input

["Henry Bausley" <hbausley@deltatau.com>]

[-- Attachment #1: Type: text/plain, Size: 2903 bytes --]


Support does appear to be present but there is a problem returning back to 
user space I suspect.

What fails is it causes Linux user space programs to get Segmentation 
errors.
Issuing a simple ls causes a segmentation fault sometimes.  The shell gets 
terminated 
and you cannot log back in.  INIT: Id "T0" respawning too fast: disabled 
for 5 minutes pops up.

However, the critical interrupt handler keeps running.  I know this by 
adding the reading 
of a physical I/O location in the handler and can see it is being read on 
the scope.

The only code in the handler is below.

void critintr_handler(void *dev)
{
  critintrcount++;          // increment a variable
  iodata = *piom;           // read an I/O location 
  mtdcr(0x0c0, 0x00002000); // clear critical interrupt
}

Below is a log of the type of crashes that occur:

root@10.34.9.213:/opt/ppmac/ktest# ls
Segmentation fault
root@10.34.9.213:/opt/ppmac/ktest# ls
Segmentation fault
root@10.34.9.213:/opt/ppmac/ktest# ls
Makefile        ktest.c    ktest.ko     ktest.mod.o  modules.order
Module.symvers  ktest.cbp  ktest.mod.c  ktest.o
root@10.34.9.213:/opt/ppmac/ktest# ls

Debian GNU/Linux 7 powerpmac ttyS0

powerpmac login: root

Debian GNU/Linux 7 powerpmac ttyS0

powerpmac login: root

Debian GNU/Linux 7 powerpmac ttyS0

powerpmac login: root

Debian GNU/Linux 7 powerpmac ttyS0

powerpmac login: root
Password: 
Last login: Thu Nov 30 20:42:16 UTC 1933 on ttyS0
Linux powerpmac 3.2.21-aspen_2.01.09 #10 Mon Aug 19 08:49:12 PDT 2013 ppc

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
INIT: Id "T0" respawning too fast: disabled for 5 minutes

----------------------------------------
From: "Benjamin Herrenschmidt" <benh@kernel.crashing.org>
Sent: Saturday, August 17, 2013 3:05 PM
To: "Kumar Gala" <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org, hbausley@deltatau.com
Subject: Re: Critical Interrupt Input

On Fri, 2013-08-16 at 06:04 -0500, Kumar Gala wrote:
> The 44x low level code needs to handle exception stacks properly for
> this to work.  Since its possible to have a critical exception occur
> while in a normal exception level, you have to have proper saving of
> additional register state and a stack frame for the critical
> exception, etc.  I'm not sure if that was ever done for 44x.

Don't 44x and FSL BookE share the same macros ? I would think 44x does
indeed implement the same crit support as e500...

What does the crash look like ?

Ben.

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev




Outbound scan for Spam or Virus by Barracuda at Delta Tau


[-- Attachment #2: Type: text/html, Size: 3570 bytes --]