All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Chris Wilson <chris@chris-wilson.co.uk>, intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH v2] drm/i915/gt: Be defensive in the face of false CS events
Date: Fri, 10 Jul 2020 14:14:11 +0100	[thread overview]
Message-ID: <645e2d22-71eb-ece7-6a9c-c9870c88ba3d@linux.intel.com> (raw)
In-Reply-To: <20200710130548.15955-1-chris@chris-wilson.co.uk>


On 10/07/2020 14:05, Chris Wilson wrote:
> If the HW throws a curve ball and reports either en event before it is
> possible, or just a completely impossible event, we have to grin and
> bear it. The first few events, we will likely not notice as we would be
> expecting some event, but as soon as we stop expecting an event and yet
> they still keep coming, then we enter into undefined state territory.
> In which case, bail out, stop processing the events, and reset the
> engine and our set of queued requests to recover.
> 
> The sporadic hangs and warnings will continue to plague CI, but at least
> system stability should not be compromised.
> 
> v2: Commentary and force the reset-on-error.
> 
> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2045
> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
> ---
>   drivers/gpu/drm/i915/gt/intel_lrc.c | 35 ++++++++++++++++++++++++-----
>   1 file changed, 29 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/gt/intel_lrc.c b/drivers/gpu/drm/i915/gt/intel_lrc.c
> index fbcfeaed6441..54cd943921a6 100644
> --- a/drivers/gpu/drm/i915/gt/intel_lrc.c
> +++ b/drivers/gpu/drm/i915/gt/intel_lrc.c
> @@ -2568,6 +2568,25 @@ static void process_csb(struct intel_engine_cs *engine)
>   	if (unlikely(head == tail))
>   		return;
>   
> +	/*
> +	 * We will consume all events from HW, or at least pretend to.
> +	 *
> +	 * The sequence of events from the HW is deterministic, and derived
> +	 * from our writes to the ELSP, with a smidgen of variability for
> +	 * the arrival of the asynchronous requests wrt to the inflight
> +	 * execution. If the HW sends an event that does not correspond with
> +	 * the one we are expecting, we have to abandon all hope as we lose
> +	 * all tracking of what the engine is actually executing. We will
> +	 * only detect we are out of sequence with the HW when we get an
> +	 * 'impossible' event because we have already drained our own
> +	 * preemption/promotion queue. If this occurs, we know that we likely
> +	 * lost track of execution earlier and must unwind and restart, the
> +	 * simplest way is by stop processing the event queue and force the
> +	 * engine to reset.
> +	 */
> +	execlists->csb_head = tail;
> +	ENGINE_TRACE(engine, "cs-irq head=%d, tail=%d\n", head, tail);
> +
>   	/*
>   	 * Hopefully paired with a wmb() in HW!
>   	 *
> @@ -2577,8 +2596,6 @@ static void process_csb(struct intel_engine_cs *engine)
>   	 * we perform the READ_ONCE(*csb_write).
>   	 */
>   	rmb();
> -
> -	ENGINE_TRACE(engine, "cs-irq head=%d, tail=%d\n", head, tail);
>   	do {
>   		bool promote;
>   
> @@ -2613,6 +2630,11 @@ static void process_csb(struct intel_engine_cs *engine)
>   		if (promote) {
>   			struct i915_request * const *old = execlists->active;
>   
> +			if (GEM_WARN_ON(!*execlists->pending)) {
> +				engine->execlists.error_interrupt = ~0u;
> +				break;
> +			}
> +
>   			ring_set_paused(engine, 0);
>   
>   			/* Point active to the new ELSP; prevent overwriting */
> @@ -2635,7 +2657,10 @@ static void process_csb(struct intel_engine_cs *engine)
>   
>   			WRITE_ONCE(execlists->pending[0], NULL);
>   		} else {
> -			GEM_BUG_ON(!*execlists->active);
> +			if (GEM_WARN_ON(!*execlists->active)) {
> +				engine->execlists.error_interrupt = ~0u;
> +				break;
> +			}
>   
>   			/* port0 completed, advanced to port1 */
>   			trace_ports(execlists, "completed", execlists->active);
> @@ -2686,7 +2711,6 @@ static void process_csb(struct intel_engine_cs *engine)
>   		}
>   	} while (head != tail);
>   
> -	execlists->csb_head = head;
>   	set_timeslice(engine);
>   
>   	/*
> @@ -3118,8 +3142,7 @@ static void execlists_submission_tasklet(unsigned long data)
>   
>   	if (unlikely(READ_ONCE(engine->execlists.error_interrupt))) {
>   		engine->execlists.error_interrupt = 0;
> -		if (ENGINE_READ(engine, RING_ESR)) /* confirm the error */
> -			execlists_reset(engine, "CS error");
> +		execlists_reset(engine, "CS error");

Since this is user visible and the rest of logging may not be, I am 
thinking there is value in distinguishing between RING_EIR reported 
errors and the ones we "add". Since RING_EIR is a masked register, it 
seems we could do that easily by making sure upper 16 bits are cleared 
in cs_irq_handler, set in process_csb, and here we choose a log message 
based on it/them?

Regards,

Tvrtko

>   	}
>   
>   	if (!READ_ONCE(engine->execlists.pending[0]) || timeout) {
> 
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  reply	other threads:[~2020-07-10 13:14 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-10 12:07 [Intel-gfx] [PATCH] drm/i915/gt: Be defensive in the face of false CS events Chris Wilson
2020-07-10 12:15 ` Chris Wilson
2020-07-10 12:16 ` Chris Wilson
2020-07-10 12:30   ` Tvrtko Ursulin
2020-07-10 12:35     ` Chris Wilson
2020-07-10 12:49       ` Tvrtko Ursulin
2020-07-10 17:23   ` Ruhl, Michael J
2020-07-10 13:05 ` [Intel-gfx] [PATCH v2] " Chris Wilson
2020-07-10 13:14   ` Tvrtko Ursulin [this message]
2020-07-10 13:27     ` [Intel-gfx] [PATCH v3] " Chris Wilson
2020-07-10 13:31     ` Chris Wilson
2020-07-10 13:43       ` Tvrtko Ursulin
2020-07-10 14:00 ` [Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/gt: Be defensive in the face of false CS events (rev5) Patchwork
2020-07-10 16:29 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=645e2d22-71eb-ece7-6a9c-c9870c88ba3d@linux.intel.com \
    --to=tvrtko.ursulin@linux.intel.com \
    --cc=chris@chris-wilson.co.uk \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.