From: Michal Simek <michal.simek@amd.com>
To: Rosen Penev <rosenp@gmail.com>, linux-sound@vger.kernel.org
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
Takashi Iwai <tiwai@suse.com>,
"moderated list:ARM/ZYNQ ARCHITECTURE"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv2] ASoC: xilinx: formatter_pcm: use more devm in probe
Date: Wed, 12 Aug 2026 07:58:23 +0200 [thread overview]
Message-ID: <647a44e4-babe-4858-84de-ad26b6711ba2@amd.com> (raw)
In-Reply-To: <20260811185013.26960-1-rosenp@gmail.com>
On 8/11/26 20:50, Rosen Penev wrote:
> Use devm_clk_get_enabled() to let the clock be enabled automatically
> and cleaned up on unbind, dropping the manual clk_prepare_enable() and
> clk_disable_unprepare() calls in probe and remove. As a result, move the
> clk struct member into probe, which is the only place it's used.
>
> Simplify the probe error paths by returning directly instead of
> jumping to clk_err, and use devm_snd_soc_register_component() return
> value directly. Also remove error message from ioremap as it throws one
> itself. Same with devm_request_irq().
>
> Assisted-by: opencode:deepseek-v4-flash-free
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> v2: add signed-off-by. Further clean up some stuff.
> sound/soc/xilinx/xlnx_formatter_pcm.c | 70 ++++++++-------------------
> 1 file changed, 20 insertions(+), 50 deletions(-)
>
> diff --git a/sound/soc/xilinx/xlnx_formatter_pcm.c b/sound/soc/xilinx/xlnx_formatter_pcm.c
> index 3d6f1e4046d8..eb878c75e293 100644
> --- a/sound/soc/xilinx/xlnx_formatter_pcm.c
> +++ b/sound/soc/xilinx/xlnx_formatter_pcm.c
> @@ -82,7 +82,6 @@ struct xlnx_pcm_drv_data {
> int mm2s_irq;
> struct snd_pcm_substream *play_stream;
> struct snd_pcm_substream *capture_stream;
> - struct clk *axi_clk;
> unsigned int sysclk;
> };
>
> @@ -596,30 +595,19 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
> u32 val;
> struct xlnx_pcm_drv_data *aud_drv_data;
> struct device *dev = &pdev->dev;
> + struct clk *axi_clk;
> +
> + axi_clk = devm_clk_get_enabled(dev, "s_axi_lite_aclk");
> + if (IS_ERR(axi_clk))
> + return dev_err_probe(dev, PTR_ERR(axi_clk), "failed to get s_axi_lite_aclk");
>
> aud_drv_data = devm_kzalloc(dev, sizeof(*aud_drv_data), GFP_KERNEL);
> if (!aud_drv_data)
> return -ENOMEM;
>
> - aud_drv_data->axi_clk = devm_clk_get(dev, "s_axi_lite_aclk");
> - if (IS_ERR(aud_drv_data->axi_clk)) {
> - ret = PTR_ERR(aud_drv_data->axi_clk);
> - dev_err(dev, "failed to get s_axi_lite_aclk(%d)\n", ret);
> - return ret;
> - }
> - ret = clk_prepare_enable(aud_drv_data->axi_clk);
> - if (ret) {
> - dev_err(dev,
> - "failed to enable s_axi_lite_aclk(%d)\n", ret);
> - return ret;
> - }
> -
> aud_drv_data->mmio = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(aud_drv_data->mmio)) {
> - dev_err(dev, "audio formatter ioremap failed\n");
> - ret = PTR_ERR(aud_drv_data->mmio);
> - goto clk_err;
> - }
> + if (IS_ERR(aud_drv_data->mmio))
> + return PTR_ERR(aud_drv_data->mmio);
>
> val = readl(aud_drv_data->mmio + XLNX_AUD_CORE_CONFIG);
> if (val & AUD_CFG_MM2S_MASK) {
> @@ -628,7 +616,7 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
> XLNX_MM2S_OFFSET);
> if (ret) {
> dev_err(dev, "audio formatter reset failed\n");
> - goto clk_err;
> + return ret;
> }
> xlnx_formatter_disable_irqs(aud_drv_data->mmio +
> XLNX_MM2S_OFFSET,
> @@ -636,17 +624,14 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
>
> aud_drv_data->mm2s_irq = platform_get_irq_byname(pdev,
> "irq_mm2s");
> - if (aud_drv_data->mm2s_irq < 0) {
> - ret = aud_drv_data->mm2s_irq;
> - goto clk_err;
> - }
> + if (aud_drv_data->mm2s_irq < 0)
> + return aud_drv_data->mm2s_irq;
> +
> ret = devm_request_irq(dev, aud_drv_data->mm2s_irq,
> xlnx_mm2s_irq_handler, 0,
> "xlnx_formatter_pcm_mm2s_irq", aud_drv_data);
> - if (ret) {
> - dev_err(dev, "xlnx audio mm2s irq request failed\n");
> - goto clk_err;
> - }
> + if (ret)
> + return ret;
> }
> if (val & AUD_CFG_S2MM_MASK) {
> aud_drv_data->s2mm_presence = true;
> @@ -654,7 +639,7 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
> XLNX_S2MM_OFFSET);
> if (ret) {
> dev_err(dev, "audio formatter reset failed\n");
> - goto clk_err;
> + return ret;
> }
> xlnx_formatter_disable_irqs(aud_drv_data->mmio +
> XLNX_S2MM_OFFSET,
> @@ -662,34 +647,21 @@ static int xlnx_formatter_pcm_probe(struct platform_device *pdev)
>
> aud_drv_data->s2mm_irq = platform_get_irq_byname(pdev,
> "irq_s2mm");
> - if (aud_drv_data->s2mm_irq < 0) {
> - ret = aud_drv_data->s2mm_irq;
> - goto clk_err;
> - }
> + if (aud_drv_data->s2mm_irq < 0)
> + return aud_drv_data->s2mm_irq;
> +
> ret = devm_request_irq(dev, aud_drv_data->s2mm_irq,
> xlnx_s2mm_irq_handler, 0,
> "xlnx_formatter_pcm_s2mm_irq",
> aud_drv_data);
> - if (ret) {
> - dev_err(dev, "xlnx audio s2mm irq request failed\n");
> - goto clk_err;
> - }
> + if (ret)
> + return ret;
> }
>
> dev_set_drvdata(dev, aud_drv_data);
>
> - ret = devm_snd_soc_register_component(dev, &xlnx_asoc_component,
> + return devm_snd_soc_register_component(dev, &xlnx_asoc_component,
> NULL, 0);
> - if (ret) {
> - dev_err(dev, "pcm platform device register failed\n");
> - goto clk_err;
> - }
> -
> - return 0;
> -
> -clk_err:
> - clk_disable_unprepare(aud_drv_data->axi_clk);
> - return ret;
> }
>
> static void xlnx_formatter_pcm_remove(struct platform_device *pdev)
> @@ -706,8 +678,6 @@ static void xlnx_formatter_pcm_remove(struct platform_device *pdev)
>
> if (ret)
> dev_err(&pdev->dev, "audio formatter reset failed\n");
> -
> - clk_disable_unprepare(adata->axi_clk);
> }
>
> static const struct of_device_id xlnx_formatter_pcm_of_match[] = {
Reviewed-by: Michal Simek <michal.simek@amd.com>
Thanks,
Michal
next prev parent reply other threads:[~2026-08-12 5:58 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-11 18:50 [PATCHv2] ASoC: xilinx: formatter_pcm: use more devm in probe Rosen Penev
2026-08-12 5:58 ` Michal Simek [this message]
2026-08-12 10:16 ` Mark Brown
2026-08-12 11:22 ` Michal Simek
2026-08-12 16:00 ` Mark Brown
2026-08-12 6:13 ` Vincenzo Frascino
2026-08-12 16:51 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=647a44e4-babe-4858-84de-ad26b6711ba2@amd.com \
--to=michal.simek@amd.com \
--cc=broonie@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=rosenp@gmail.com \
--cc=tiwai@suse.com \
--cc=vincenzo.frascino@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.