Re: [[RFC]DPU PATCH 2/4] dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings

[spanda-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org]

On 2018-04-18 19:28, Sean Paul wrote:
> On Wed, Apr 18, 2018 at 05:50:00PM +0530, Sandeep Panda wrote:
>> Document the bindings used for the sn65dsi86 DSI to eDP bridge.
>> 
> 
> Please add a changelog to your patches so reviewers know what has 
> changed
> between patch versions.
I will update the change log in the commit text of the patches.
> 
>> Signed-off-by: Sandeep Panda <spanda@codeaurora.org>
>> ---
>>  .../bindings/display/bridge/ti,sn65dsi86.txt       | 60 
>> ++++++++++++++++++++++
>>  1 file changed, 60 insertions(+)
>>  create mode 100644 
>> Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
>> 
>> diff --git 
>> a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt 
>> b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
>> new file mode 100644
>> index 0000000..9e2612e
>> --- /dev/null
>> +++ 
>> b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt
>> @@ -0,0 +1,60 @@
>> +SN65DSI86 DSI to eDP bridge chip
>> +--------------------------------
>> +
>> +This is the binding for Texas Instruments SN65DSI86 bridge.
>> +
>> +Required properties:
>> +- compatible: Must be "ti,sn65dsi86"
>> +- reg: i2c address of the chip, 0x2d as per datasheet
>> +- enable-gpios: OF device-tree gpio specifications for bridge_en pin
> 
> The datasheet only has one enable pin, why gpios?
This is the convention followed by other bridge drivers also.
https://www.kernel.org/doc/Documentation/devicetree/bindings/gpio/gpio.txt
please the example mentioned here,
Example of a node using GPIOs:

	node {
		enable-gpios = <&qe_pio_e 18 GPIO_ACTIVE_HIGH>;
	};

> 
>> +
>> +- vccio-supply: A 1.8V supply that powers up the digital IOs.
>> +- vcca-supply: A 1.2V supply that powers up the analog circuits.
>> +
>> +Optional properties:
>> +
>> +- irq-gpios: OF device-tree gpio specification for interrupt pin
> 
> From the last review, Rob said, 'Use "interrupts" property instead.'
> 
> You didn't provide responses to prior review comments, so it's unclear 
> whether
> you've intentionally or unintentionally ignored him :)
Sorry missed it completely while addressing other review comments.
> 
> Sean
> 
>> +
>> +Required nodes:
>> +
>> +This device has two video ports. Their connections are modelled using 
>> the
>> +OF graph bindings specified in 
>> Documentation/devicetree/bindings/graph.txt.
>> +
>> +- Video port 0 for DSI input
>> +- Video port 1 for eDP output
>> +
>> +Example
>> +-------
>> +
>> +edp-bridge@2d {
>> +	compatible = "ti,sn65dsi86";
>> +	#address-cells = <1>;
>> +	#size-cells = <0>;
>> +	reg = <0x2d>;
>> +
>> +	enable-gpios = <&msmgpio 33 GPIO_ACTIVE_HIGH>;
>> +
>> +	vccio-supply = <&pm8916_l17>;
>> +	vcca-supply = <&pm8916_l6>;
>> +
>> +	ports {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		port@0 {
>> +			reg = <0>;
>> +
>> +			edp_bridge_in: endpoint {
>> +				remote-endpoint = <&dsi_out>;
>> +			};
>> +		};
>> +
>> +		port@1 {
>> +			reg = <1>;
>> +
>> +			edp_bridge_out: endpoint {
>> +				remote-endpoint = <&edp_panel_in>;
>> +			};
>> +		};
>> +	};
>> +}
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora 
>> Forum,
>> a Linux Foundation Collaborative Project
>> 
_______________________________________________
Freedreno mailing list
Freedreno@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/freedreno