diff for duplicates of <65af46c3-e48f-4eae-8390-2bc01332ccbf@kernel.org> diff --git a/a/1.txt b/N1/1.txt index 2672acc..e8cd3f8 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -12,11 +12,11 @@ On 01/05/2024 05:38, Jeremy Kerr wrote: > index 29f94696d8b1..f9d01599a965 100644 > --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi > +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi -> @@ -866,6 +866,13 @@ i2c: bus at 1e78a000 { +> @@ -866,6 +866,13 @@ i2c: bus@1e78a000 { > ranges = <0 0x1e78a000 0x1000>; > }; > -> + i3c: bus at 1e7a0000 { +> + i3c: bus@1e7a0000 { > + compatible = "simple-bus"; What bus is it? Why is it even needed? If it is i3c, then for sure @@ -27,10 +27,10 @@ compatible is wrong. > + ranges = <0 0x1e7a0000 0x8000>; > + }; > + -> fsim0: fsi at 1e79b000 { +> fsim0: fsi@1e79b000 { > compatible = "aspeed,ast2600-fsi-master", "fsi-master"; > reg = <0x1e79b000 0x94>; -> @@ -1125,3 +1132,89 @@ i2c15: i2c-bus at 800 { +> @@ -1125,3 +1132,89 @@ i2c15: i2c-bus@800 { > status = "disabled"; > }; > }; diff --git a/a/content_digest b/N1/content_digest index f31a809..b76e141 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,8 +1,15 @@ "ref\020240501033832.1529340-1-jk@codeconstruct.com.au\0" "From\0Krzysztof Kozlowski <krzk@kernel.org>\0" - "Subject\0[PATCH] ARM: dts: aspeed-g6: Add nodes for i3c controllers\0" + "Subject\0Re: [PATCH] ARM: dts: aspeed-g6: Add nodes for i3c controllers\0" "Date\0Wed, 1 May 2024 12:24:37 +0200\0" - "To\0linux-aspeed@lists.ozlabs.org\0" + "To\0Jeremy Kerr <jk@codeconstruct.com.au>" + " linux-aspeed@lists.ozlabs.org\0" + "Cc\0devicetree@vger.kernel.org" + Andrew Jeffery <andrew@codeconstruct.com.au> + Joel Stanley <joel@jms.id.au> + Conor Dooley <conor+dt@kernel.org> + Rob Herring <robh+dt@kernel.org> + " Krzysztof Kozlowski <krzk+dt@kernel.org>\0" "\00:1\0" "b\0" "On 01/05/2024 05:38, Jeremy Kerr wrote:\n" @@ -19,11 +26,11 @@ "> index 29f94696d8b1..f9d01599a965 100644\n" "> --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi\n" "> +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi\n" - "> @@ -866,6 +866,13 @@ i2c: bus at 1e78a000 {\n" + "> @@ -866,6 +866,13 @@ i2c: bus@1e78a000 {\n" "> \t\t\t\tranges = <0 0x1e78a000 0x1000>;\n" "> \t\t\t};\n" "> \n" - "> +\t\t\ti3c: bus at 1e7a0000 {\n" + "> +\t\t\ti3c: bus@1e7a0000 {\n" "> +\t\t\t\tcompatible = \"simple-bus\";\n" "\n" "What bus is it? Why is it even needed? If it is i3c, then for sure\n" @@ -34,10 +41,10 @@ "> +\t\t\t\tranges = <0 0x1e7a0000 0x8000>;\n" "> +\t\t\t};\n" "> +\n" - "> \t\t\tfsim0: fsi at 1e79b000 {\n" + "> \t\t\tfsim0: fsi@1e79b000 {\n" "> \t\t\t\tcompatible = \"aspeed,ast2600-fsi-master\", \"fsi-master\";\n" "> \t\t\t\treg = <0x1e79b000 0x94>;\n" - "> @@ -1125,3 +1132,89 @@ i2c15: i2c-bus at 800 {\n" + "> @@ -1125,3 +1132,89 @@ i2c15: i2c-bus@800 {\n" "> \t\tstatus = \"disabled\";\n" "> \t};\n" "> };\n" @@ -54,4 +61,4 @@ "Best regards,\n" Krzysztof -763898e10e2f6afa3b53953c46e5515ad20e9223a496fe225bc78035461381e0 +92f678adb12b5b2e5782f1114a18efe78fc62040a182d242e18f2efb7b9519f9
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.