RE: [PATCH v2 2/2] wifi: rtw88: enable TX reports for the management queue

[Ping-Ke Shih <pkshih@realtek.com>]

Andrey Skvortsov <andrej.skvortzov@gmail.com> wrote:
> This is needed for AP mode. Otherwise client sees the network, but
> can't connect to it.
> 
> REG_FWHW_TXQ_CTRL+1 is set to WLAN_TXQ_RPT_EN (0x1F) in common mac
> init function (__rtw8723x_mac_init), but the value was overwritten
> from mac table later. mac_postinit is run after registers from mac
> table are set, this allows to set correct values.
> 
> Tested on rtl8723cs, that reuses rtw8703b driver.
> 
> Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
> ---
>  drivers/net/wireless/realtek/rtw88/rtw8703b.c | 1 +
>  drivers/net/wireless/realtek/rtw88/rtw8723d.c | 1 +
>  drivers/net/wireless/realtek/rtw88/rtw8723x.c | 9 ++++++++-
>  drivers/net/wireless/realtek/rtw88/rtw8723x.h | 6 ++++++
>  4 files changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> index 03475af973b52..821c28d9cb5d4 100644
> --- a/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> +++ b/drivers/net/wireless/realtek/rtw88/rtw8703b.c
> @@ -1832,6 +1832,7 @@ static const struct rtw_chip_ops rtw8703b_ops = {
>         .power_on               = rtw_power_on,
>         .power_off              = rtw_power_off,
>         .mac_init               = rtw8723x_mac_init,
> +       .mac_postinit           = rtw8723x_mac_postinit,

If chips don't have this ops, please give them NULL to be clear that
we don't miss it.

Since these two patches are small, I don't mind to combine them together.
Make decision yourself.

By the way, please select rtw-next tree by [PATCH v3 rtw-next].

>         .dump_fw_crash          = NULL,
>         .shutdown               = NULL,
>         .read_efuse             = rtw8703b_read_efuse,

[...]