Re: [Adeos-main] at91sam9260

[Michael Trimarchi <trimarchimichael@domain.hid>]

[-- Attachment #1: Type: text/plain, Size: 1054 bytes --]


Hi,
>Ok. Could you try something ? It will work with I-pipe only but will
>break Xenomai, so do not try to run Xenomai over this modification.

>In include/asm-arm/system.h in the definition of the switch_to macro
>try removing the calls to local_irq_disable_hw_cond and
>local_irq_enable_hw_cond, and tell us if you still get the serial
>driver overruns.
Ok,
now I can't because I have a flight in the afternoon. Maybe this night 
or tomorrow :)

>This means that there is a fault in xnpod_schedule, that causes a
>Linux function to be called over Xenomai domain. But the problem is
>the fault in the first place. To debug this, we need a disassembly of
>xnpod_schedule. This will be best discussed on Xenomai mailing list.
>You probably have a problem in your port of the I-pipe patch, since
>Xenomai is reported to works on other AT91s.
Ok

Regards MIchael






      ___________________________________ 
L'email della prossima generazione? Puoi averla con la nuova Yahoo! Mail: 
http://it.docs.yahoo.com/nowyoucan.html

[-- Attachment #2: Type: text/html, Size: 1578 bytes --]