From: ksa1 <ksa1@gmx.de>
To: linux-kernel@vger.kernel.org
Subject: d-link dfe-530 tx (bug-report)
Date: Sun, 4 Feb 2001 10:26:03 +0100 [thread overview]
Message-ID: <66725424.20010204102603@gmx.de> (raw)
hi!
When I download big files with a win-client from my linux-server with samba 2.07 and
kernel 2.4.1 (just downloaded to test the new driver) after a random
time there is a connection-error! ..when I just download a few
megabytes there is no problem.
/var/log/messages on the linux-server with the d-link dfe-530 tx:
[THIS IS THE ERROR-MESSAGE!]
Feb 1 17:25:56 Nethost kernel: NETDEV WATCHDOG: eth0: transmit timed out
Feb 1 17:25:56 Nethost kernel: eth0: Transmit timed out, status 0000, PHY status 782d, resetting...
after booting everthing is fine (..until the big smb-transfer):
/var/log/messages (good):
via-rhine.c:v1.08b-LK1.1.6 8/9/2000 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
PCI: Assigned IRQ 9 for device 00:0a.0
PCI: Setting latency timer of device 00:0a.0 to 64
eth0: VIA VT6102 Rhine-II at 0xe000, 00:50:ba:68:59:9c, IRQ 9.
eth0: MII PHY found at address 8, status 0x7829 advertising 01e1 Link 0081.
I hope you can fix this problem.
bye.
additional informations:
lspci -vvv:
00:0a.0 Ethernet controller: VIA Technologies, Inc.: Unknown device 3065 (rev 42
)
Subsystem: D-Link System Inc: Unknown device 1401
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step
ping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort
- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at e5000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot
+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
cat /proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 4
model name : Pentium MMX
stepping : 3
cpu MHz : 192.107
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8 mmx
bogomips : 383.38
cat /proc/ioports:
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0280-029f : eth1
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
e000-e0ff : VIA Technologies, Inc. Ethernet Controller
e000-e0ff : eth0
e800-e80f : Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
e800-e807 : ide0
e808-e80f : ide1
cat /proc/interrupts:
CPU0
0: 59686 XT-PIC timer
1: 2 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 21 XT-PIC serial
9: 3276 XT-PIC eth0
10: 93 XT-PIC eth1
11: 11704 XT-PIC HiSax
14: 9771 XT-PIC ide0
15: 13 XT-PIC ide1
NMI: 0
ERR: 0
cat /proc/modules:
smc-ultra 4784 1 (autoclean)
via-rhine 9616 1 (autoclean)
hisax 140176 4
isdn 89904 5 [hisax]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next reply other threads:[~2001-02-04 9:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2001-02-04 9:26 ksa1 [this message]
-- strict thread matches above, loose matches on Subject: below --
2001-02-04 10:23 d-link dfe-530 tx (bug-report) Jonathan Morton
2001-02-04 11:40 ` hjb
2001-02-04 12:14 ` Urban Widmark
2001-02-04 12:35 ` Manfred Spraul
2001-02-04 12:40 ` Urban Widmark
2001-02-04 15:39 ` Manfred
[not found] ` <Pine.LNX.4.30.0102042130100.26061-300000@cola.teststation.com>
2001-02-05 0:07 ` Thomas Stewart
2001-02-05 8:38 ` Manfred Spraul
2001-02-05 9:26 ` Urban Widmark
2001-02-05 10:41 ` Thomas Stewart
2001-02-05 10:58 ` Manfred Spraul
2001-02-05 19:41 ` Thomas Stewart
2001-02-05 14:51 ksa1
2001-02-06 21:15 ` Jonathan Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=66725424.20010204102603@gmx.de \
--to=ksa1@gmx.de \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.