[syzbot] [mptcp?] general protection fault in proc_scheduler

[syzbot <syzbot+e364f774c6f57f2c86d1@syzkaller.appspotmail.com>]

Hello,

syzbot found the following issue on:

HEAD commit:    ccb98ccef0e5 Merge tag 'platform-drivers-x86-v6.13-4' of g..
git tree:       upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=128f6ac4580000
kernel config:  https://syzkaller.appspot.com/x/.config?x=86dd15278dbfe19f
dashboard link: https://syzkaller.appspot.com/bug?extid=e364f774c6f57f2c86d1
compiler:       gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40
syz repro:      https://syzkaller.appspot.com/x/repro.syz?x=1245eaf8580000

Downloadable assets:
disk image: https://storage.googleapis.com/syzbot-assets/d24eb225cff7/disk-ccb98cce.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/dd81532f8240/vmlinux-ccb98cce.xz
kernel image: https://storage.googleapis.com/syzbot-assets/18b08e4bbf40/bzImage-ccb98cce.xz

IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+e364f774c6f57f2c86d1@syzkaller.appspotmail.com

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125
Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00
RSP: 0018:ffffc900034774e8 EFLAGS: 00010206

RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620
RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028
RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040
R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000
R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000
FS:  0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601
 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612
 __kernel_write+0xf6/0x140 fs/read_write.c:632
 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539
 acct_pin_kill+0x2d/0x100 kernel/acct.c:192
 pin_kill+0x194/0x7c0 fs/fs_pin.c:44
 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81
 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366
 task_work_run+0x14e/0x250 kernel/task_work.c:239
 exit_task_work include/linux/task_work.h:43 [inline]
 do_exit+0xad8/0x2d70 kernel/exit.c:938
 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087
 get_signal+0x2576/0x2610 kernel/signal.c:3017
 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337
 exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
 exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
 __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
 syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218
 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fee3cb87a6a
Code: Unable to access opcode bytes at 0x7fee3cb87a40.
RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037
RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a
RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7
R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500
R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125
Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00
RSP: 0018:ffffc900034774e8 EFLAGS: 00010206
RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620
RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028
RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040
R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000
R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000
FS:  0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
----------------
Code disassembly (best guess), 1 bytes skipped:
   0:	42 80 3c 38 00       	cmpb   $0x0,(%rax,%r15,1)
   5:	0f 85 fe 02 00 00    	jne    0x309
   b:	4d 8b a4 24 08 09 00 	mov    0x908(%r12),%r12
  12:	00
  13:	48 b8 00 00 00 00 00 	movabs $0xdffffc0000000000,%rax
  1a:	fc ff df
  1d:	49 8d 7c 24 28       	lea    0x28(%r12),%rdi
  22:	48 89 fa             	mov    %rdi,%rdx
  25:	48 c1 ea 03          	shr    $0x3,%rdx
* 29:	80 3c 02 00          	cmpb   $0x0,(%rdx,%rax,1) <-- trapping instruction
  2d:	0f 85 cc 02 00 00    	jne    0x2ff
  33:	4d 8b 7c 24 28       	mov    0x28(%r12),%r15
  38:	48                   	rex.W
  39:	8d                   	.byte 0x8d
  3a:	84 24 c8             	test   %ah,(%rax,%rcx,8)


---
This report is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at syzkaller@googlegroups.com.

syzbot will keep track of this issue. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.

If the report is already addressed, let syzbot know by replying with:
#syz fix: exact-commit-title

If you want syzbot to run the reproducer, reply with:
#syz test: git://repo/address.git branch-or-commit-hash
If you attach or paste a git patch, syzbot will apply it before testing.

If you want to overwrite report's subsystems, reply with:
#syz set subsystems: new-subsystem
(See the list of subsystem names on the web dashboard)

If the report is a duplicate of another one, reply with:
#syz dup: exact-subject-of-another-report

If you want to undo deduplication, reply with:
#syz undup