Re: [PATCH v5 08/16] cxl/pci: Map CXL PCIe Root Port and Downstream Switch Port RAS registers

[Ira Weiny <ira.weiny@intel.com>]

Terry Bowman wrote:
> The CXL mem driver (cxl_mem) currently maps and caches a pointer to RAS
> registers for the endpoint's Root Port. The same needs to be done for
> each of the CXL Downstream Switch Ports and CXL Root Ports found between
> the endpoint and CXL Host Bridge.
> 
> Introduce cxl_init_ep_ports_aer() to be called for each CXL Port in the
> sub-topology between the endpoint and the CXL Host Bridge. This function
> will determine if there are CXL Downstream Switch Ports or CXL Root Ports
> associated with this Port. The same check will be added in the future for
> upstream switch ports.
> 
> Move the RAS register map logic from cxl_dport_map_ras() into
> cxl_dport_init_ras_reporting(). This eliminates the need for the helper
> function, cxl_dport_map_ras().
> 
> cxl_init_ep_ports_aer() calls cxl_dport_init_ras_reporting() to map
> the RAS registers for CXL Downstream Switch Ports and CXL Root Ports.
> 
> cxl_dport_init_ras_reporting() must check for previously mapped registers
> before mapping. This is required because multiple endpoints under a CXL
> switch may share an upstream CXL Root Port, CXL Downstream Switch Port,
> or CXL Downstream Switch Port. Ensure the RAS registers are only mapped
> once.
> 
> Signed-off-by: Terry Bowman <terry.bowman@amd.com>
> Reviewed-by: Alejandro Lucero <alucerop@amd.com>
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Reviewed-by: Ira Weiny <ira.weiny@intel.com>

[snip]