From: syzbot <syzbot+7aef76bdb53b83d62a9e@syzkaller.appspotmail.com>
To: dmantipov@yandex.ru, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [ocfs2?] kernel BUG in ocfs2_set_new_buffer_uptodate (2)
Date: Fri, 24 Oct 2025 02:32:02 -0700 [thread overview]
Message-ID: <68fb4792.050a0220.346f24.00b8.GAE@google.com> (raw)
In-Reply-To: <20251024071154.COzwR%dmantipov@yandex.ru>
Hello,
syzbot tried to test the proposed patch but the build/boot failed:
ace will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[ 47.395182][ T5971] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[ 47.416728][ T5971] device hsr_slave_0 entered promiscuous mode
[ 47.423245][ T5971] device hsr_slave_1 entered promiscuous mode
[ 47.471639][ T5971] netdevsim netdevsim0 netdevsim0: renamed from eth0
[ 47.480389][ T5971] netdevsim netdevsim0 netdevsim1: renamed from eth1
[ 47.489086][ T5971] netdevsim netdevsim0 netdevsim2: renamed from eth2
[ 47.497565][ T5971] netdevsim netdevsim0 netdevsim3: renamed from eth3
[ 47.513466][ T5971] bridge0: port 2(bridge_slave_1) entered blocking state
[ 47.520632][ T5971] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 47.528003][ T5971] bridge0: port 1(bridge_slave_0) entered blocking state
[ 47.535131][ T5971] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 47.561198][ T5971] 8021q: adding VLAN 0 to HW filter on device bond0
[ 47.573567][ T43] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[ 47.582072][ T43] bridge0: port 1(bridge_slave_0) entered disabled state
[ 47.589977][ T43] bridge0: port 2(bridge_slave_1) entered disabled state
[ 47.597565][ T43] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 47.607679][ T5971] 8021q: adding VLAN 0 to HW filter on device team0
[ 47.616985][ T677] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[ 47.625385][ T677] bridge0: port 1(bridge_slave_0) entered blocking state
[ 47.632487][ T677] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 47.642855][ T677] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[ 47.651418][ T677] bridge0: port 2(bridge_slave_1) entered blocking state
[ 47.658498][ T677] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 47.672523][ T677] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[ 47.681721][ T677] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[ 47.691754][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[ 47.702417][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[ 47.713153][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[ 47.723012][ T5971] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[ 47.769360][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[ 47.776980][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[ 47.788069][ T5971] 8021q: adding VLAN 0 to HW filter on device batadv0
[ 47.802087][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[ 47.817286][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[ 47.825559][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[ 47.833747][ T786] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[ 47.843065][ T5971] device veth0_vlan entered promiscuous mode
[ 47.853007][ T5971] device veth1_vlan entered promiscuous mode
[ 47.868131][ T608] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[ 47.876210][ T608] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[ 47.884528][ T608] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[ 47.894414][ T5971] device veth0_macvtap entered promiscuous mode
[ 47.903703][ T5971] device veth1_macvtap entered promiscuous mode
[ 47.916303][ T5971] batman_adv: batadv0: Interface activated: batadv_slave_0
[ 47.924143][ T677] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[ 47.932868][ T677] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[ 47.943246][ T5971] batman_adv: batadv0: Interface activated: batadv_slave_1
[ 47.950987][ T677] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[ 47.961028][ T5971] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[ 47.969989][ T5971] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[ 47.978838][ T5971] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[ 47.987799][ T5971] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[ 48.035897][ C1] ================================================================================
[ 48.045345][ C1] UBSAN: signed-integer-overflow in ./arch/x86/include/asm/atomic.h:165:11
[ 48.053952][ C1] 1251854394 + 1856889025 cannot be represented in type 'int'
[ 48.061418][ C1] CPU: 1 PID: 5984 Comm: modprobe Not tainted syzkaller #0
[ 48.068591][ C1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
[ 48.078727][ C1] Call Trace:
[ 48.081999][ C1] <IRQ>
[ 48.084847][ C1] dump_stack+0xfd/0x16e
[ 48.089084][ C1] ubsan_epilogue+0xa/0x30
[ 48.093473][ C1] handle_overflow+0x192/0x1b0
[ 48.098230][ C1] ? prandom_u32+0x1d/0x1f0
[ 48.102709][ C1] ip_idents_reserve+0x14a/0x170
[ 48.107672][ C1] __ip_select_ident+0xe4/0x1c0
[ 48.112497][ C1] iptunnel_xmit+0x466/0x7b0
[ 48.117065][ C1] udp_tunnel_xmit_skb+0x1ba/0x290
[ 48.122153][ C1] geneve_xmit+0x1d05/0x2140
[ 48.126729][ C1] dev_hard_start_xmit+0x294/0x780
[ 48.132192][ C1] __dev_queue_xmit+0x1678/0x28b0
[ 48.137274][ C1] ip6_finish_output2+0x1020/0x1490
[ 48.142557][ C1] NF_HOOK+0x45/0x2c0
[ 48.146551][ C1] ? NF_HOOK+0x2c0/0x2c0
[ 48.150889][ C1] mld_sendpack+0x5f9/0xa70
[ 48.155387][ C1] mld_ifc_timer_expire+0x7e1/0x990
[ 48.160579][ C1] ? lock_acquire+0x78/0x310
[ 48.165155][ C1] ? lock_release+0x69/0x610
[ 48.169820][ C1] ? debug_object_deactivate+0x9b/0x250
[ 48.175350][ C1] ? mld_gq_timer_expire+0xe0/0xe0
[ 48.180456][ C1] call_timer_fn+0x105/0x440
[ 48.185031][ C1] ? mld_gq_timer_expire+0xe0/0xe0
[ 48.190128][ C1] __run_timers+0x5d8/0x7a0
[ 48.194970][ C1] ? __do_softirq+0x164/0x8ae
[ 48.199635][ C1] run_timer_softirq+0x19/0x30
[ 48.204496][ C1] __do_softirq+0x23c/0x8ae
[ 48.208985][ C1] ? asm_call_irq_on_stack+0xf/0x20
[ 48.214251][ C1] asm_call_irq_on_stack+0xf/0x20
[ 48.219386][ C1] </IRQ>
[ 48.222309][ C1] do_softirq_own_stack+0x6d/0xb0
[ 48.227317][ C1] __irq_exit_rcu+0x1e1/0x1f0
[ 48.231975][ C1] irq_exit_rcu+0x5/0x20
[ 48.236201][ C1] sysvec_apic_timer_interrupt+0x9d/0xb0
[ 48.241991][ C1] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 48.247952][ C1] RIP: 0010:xas_next_entry+0x96/0x3d0
[ 48.253418][ C1] Code: b6 04 18 84 c0 0f 85 19 03 00 00 41 0f b6 2c 24 31 ff 89 ee e8 1b 31 de ff 85 ed 0f 85 f5 02 00 00 4c 89 64 24 18 49 8d 4f 12 <48> 89 0c 24 48 c1 e9 03 48 89 4c 24 20 0f b6 04 19 84 c0 0f 85 fc
[ 48.273552][ C1] RSP: 0000:ffffc900018ffc60 EFLAGS: 00000246
[ 48.279869][ C1] RAX: ffffffff81918485 RBX: dffffc0000000000 RCX: ffffc900018ffd2a
[ 48.287824][ C1] RDX: ffff888021f18000 RSI: 0000000000000000 RDI: 0000000000000000
[ 48.295956][ C1] RBP: 0000000000000000 R08: dffffc0000000000 R09: fffff940000ad161
[ 48.304003][ C1] R10: fffff940000ad161 R11: 1ffffd40000ad160 R12: ffff8880245a3180
[ 48.312223][ C1] R13: dffffc0000000000 R14: 0000000000000000 R15: ffffc900018ffd18
[ 48.320216][ C1] ? xas_next_entry+0x85/0x3d0
[ 48.324967][ C1] ? unlock_page+0x17c/0x210
[ 48.329645][ C1] filemap_map_pages+0x5fe/0xa30
[ 48.334573][ C1] handle_mm_fault+0x16b8/0x2930
[ 48.339498][ C1] do_user_addr_fault+0x468/0xa50
[ 48.344635][ C1] ? asm_exc_page_fault+0x8/0x30
[ 48.349551][ C1] exc_page_fault+0x67/0x100
[ 48.354134][ C1] asm_exc_page_fault+0x1e/0x30
[ 48.359062][ C1] RIP: 0033:0x7f8f0a2e0a55
[ 48.363612][ C1] Code: d2 39 c1 0f 8f 7c 00 00 00 2d 80 0f 00 00 0f 86 a8 fc ff ff 45 31 c0 83 e8 60 0f 8f 8d 00 00 00 0f 1f 44 00 00 c5 fe 6f 04 17 <c5> fd 74 0c 16 c5 85 74 d0 c5 ed df c9 c5 fd d7 c9 ff c1 75 28 83
[ 48.383203][ C1] RSP: 002b:00007ffe9e48a9e8 EFLAGS: 00010283
[ 48.389369][ C1] RAX: 00000000ffffffbf RBX: 0000560d57518000 RCX: 00000000000003f0
[ 48.397494][ C1] RDX: 0000000000000000 RSI: 00007f8f0a4003f0 RDI: 00007ffe9e48af9f
[ 48.405577][ C1] RBP: 00007ffe9e48ab38 R08: 0000000000000000 R09: 00007f8f0a42fa60
[ 48.413539][ C1] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 48.421495][ C1] R13: 00007ffe9e48ab60 R14: 00007f8f0a460000 R15: 0000560d57519d98
[ 48.429493][ C1] ================================================================================
[ 48.438917][ C1] Kernel panic - not syncing: UBSAN: panic_on_warn set ...
[ 48.446229][ C1] CPU: 1 PID: 5984 Comm: modprobe Not tainted syzkaller #0
[ 48.453574][ C1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
[ 48.463620][ C1] Call Trace:
[ 48.466930][ C1] <IRQ>
[ 48.469786][ C1] dump_stack+0xfd/0x16e
[ 48.474260][ C1] panic+0x2f0/0x9c0
[ 48.478304][ C1] check_panic_on_warn+0x95/0xe0
[ 48.483324][ C1] handle_overflow+0x192/0x1b0
[ 48.488166][ C1] ? prandom_u32+0x1d/0x1f0
[ 48.492648][ C1] ip_idents_reserve+0x14a/0x170
[ 48.497566][ C1] __ip_select_ident+0xe4/0x1c0
[ 48.502403][ C1] iptunnel_xmit+0x466/0x7b0
[ 48.507007][ C1] udp_tunnel_xmit_skb+0x1ba/0x290
[ 48.512102][ C1] geneve_xmit+0x1d05/0x2140
[ 48.516699][ C1] dev_hard_start_xmit+0x294/0x780
[ 48.521904][ C1] __dev_queue_xmit+0x1678/0x28b0
[ 48.526917][ C1] ip6_finish_output2+0x1020/0x1490
[ 48.532265][ C1] NF_HOOK+0x45/0x2c0
[ 48.536362][ C1] ? NF_HOOK+0x2c0/0x2c0
[ 48.540600][ C1] mld_sendpack+0x5f9/0xa70
[ 48.545084][ C1] mld_ifc_timer_expire+0x7e1/0x990
[ 48.550256][ C1] ? lock_acquire+0x78/0x310
[ 48.554818][ C1] ? lock_release+0x69/0x610
[ 48.559386][ C1] ? debug_object_deactivate+0x9b/0x250
[ 48.564916][ C1] ? mld_gq_timer_expire+0xe0/0xe0
[ 48.570159][ C1] call_timer_fn+0x105/0x440
[ 48.574730][ C1] ? mld_gq_timer_expire+0xe0/0xe0
[ 48.580362][ C1] __run_timers+0x5d8/0x7a0
[ 48.584876][ C1] ? __do_softirq+0x164/0x8ae
[ 48.589741][ C1] run_timer_softirq+0x19/0x30
[ 48.594575][ C1] __do_softirq+0x23c/0x8ae
[ 48.599107][ C1] ? asm_call_irq_on_stack+0xf/0x20
[ 48.604286][ C1] asm_call_irq_on_stack+0xf/0x20
[ 48.609288][ C1] </IRQ>
[ 48.612210][ C1] do_softirq_own_stack+0x6d/0xb0
[ 48.617294][ C1] __irq_exit_rcu+0x1e1/0x1f0
[ 48.621954][ C1] irq_exit_rcu+0x5/0x20
[ 48.626175][ C1] sysvec_apic_timer_interrupt+0x9d/0xb0
[ 48.631799][ C1] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 48.637759][ C1] RIP: 0010:xas_next_entry+0x96/0x3d0
[ 48.643107][ C1] Code: b6 04 18 84 c0 0f 85 19 03 00 00 41 0f b6 2c 24 31 ff 89 ee e8 1b 31 de ff 85 ed 0f 85 f5 02 00 00 4c 89 64 24 18 49 8d 4f 12 <48> 89 0c 24 48 c1 e9 03 48 89 4c 24 20 0f b6 04 19 84 c0 0f 85 fc
[ 48.662984][ C1] RSP: 0000:ffffc900018ffc60 EFLAGS: 00000246
[ 48.669035][ C1] RAX: ffffffff81918485 RBX: dffffc0000000000 RCX: ffffc900018ffd2a
[ 48.677198][ C1] RDX: ffff888021f18000 RSI: 0000000000000000 RDI: 0000000000000000
[ 48.685542][ C1] RBP: 0000000000000000 R08: dffffc0000000000 R09: fffff940000ad161
[ 48.693603][ C1] R10: fffff940000ad161 R11: 1ffffd40000ad160 R12: ffff8880245a3180
[ 48.701553][ C1] R13: dffffc0000000000 R14: 0000000000000000 R15: ffffc900018ffd18
[ 48.709709][ C1] ? xas_next_entry+0x85/0x3d0
[ 48.714730][ C1] ? unlock_page+0x17c/0x210
[ 48.719314][ C1] filemap_map_pages+0x5fe/0xa30
[ 48.724318][ C1] handle_mm_fault+0x16b8/0x2930
[ 48.729240][ C1] do_user_addr_fault+0x468/0xa50
[ 48.734236][ C1] ? asm_exc_page_fault+0x8/0x30
[ 48.739360][ C1] exc_page_fault+0x67/0x100
[ 48.743925][ C1] asm_exc_page_fault+0x1e/0x30
[ 48.748752][ C1] RIP: 0033:0x7f8f0a2e0a55
[ 48.753345][ C1] Code: d2 39 c1 0f 8f 7c 00 00 00 2d 80 0f 00 00 0f 86 a8 fc ff ff 45 31 c0 83 e8 60 0f 8f 8d 00 00 00 0f 1f 44 00 00 c5 fe 6f 04 17 <c5> fd 74 0c 16 c5 85 74 d0 c5 ed df c9 c5 fd d7 c9 ff c1 75 28 83
[ 48.773588][ C1] RSP: 002b:00007ffe9e48a9e8 EFLAGS: 00010283
[ 48.779672][ C1] RAX: 00000000ffffffbf RBX: 0000560d57518000 RCX: 00000000000003f0
[ 48.787743][ C1] RDX: 0000000000000000 RSI: 00007f8f0a4003f0 RDI: 00007ffe9e48af9f
[ 48.796300][ C1] RBP: 00007ffe9e48ab38 R08: 0000000000000000 R09: 00007f8f0a42fa60
[ 48.804330][ C1] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[ 48.812278][ C1] R13: 00007ffe9e48ab60 R14: 00007f8f0a460000 R15: 0000560d57519d98
[ 48.820381][ C1] Kernel Offset: disabled
[ 48.824731][ C1] Rebooting in 86400 seconds..
syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build3457238269=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.24.4'
GOWORK=''
PKG_CONFIG='pkg-config'
git status (err=<nil>)
HEAD detached at e2beed91937
nothing to commit, working tree clean
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=e2beed91937c0ace342f19a2e9afb67adb3a828a -X github.com/google/syzkaller/prog.gitRevisionDate=20250911-084951" ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=e2beed91937c0ace342f19a2e9afb67adb3a828a -X github.com/google/syzkaller/prog.gitRevisionDate=20250911-084951" ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=e2beed91937c0ace342f19a2e9afb67adb3a828a -X github.com/google/syzkaller/prog.gitRevisionDate=20250911-084951" -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_amd64
g++ -o ./bin/linux_amd64/syz-executor executor/executor.cc \
-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include -DGOOS_linux=1 -DGOARCH_amd64=1 \
-DHOSTGOOS_linux=1 -DGIT_REVISION=\"e2beed91937c0ace342f19a2e9afb67adb3a828a\"
/usr/bin/ld: /tmp/cciE1xKJ.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x104): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null
Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=166e93e2580000
Tested on:
commit: d3d0b4e2 Linux 5.10.245
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git linux-5.10.y
kernel config: https://syzkaller.appspot.com/x/.config?x=39182a54870857eb
dashboard link: https://syzkaller.appspot.com/bug?extid=7aef76bdb53b83d62a9e
compiler: Debian clang version 20.1.8 (++20250708063551+0c9f909b7976-1~exp1~20250708183702.136), Debian LLD 20.1.8
patch: https://syzkaller.appspot.com/x/patch.diff?x=111d0be2580000
next parent reply other threads:[~2025-10-24 9:32 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20251024071154.COzwR%dmantipov@yandex.ru>
2025-10-24 9:32 ` syzbot [this message]
[not found] <20251029062741.5wX4O%dmantipov@yandex.ru>
2025-10-29 16:15 ` [syzbot] [ocfs2?] kernel BUG in ocfs2_set_new_buffer_uptodate (2) syzbot
[not found] <20251029062548.p-W3Z%dmantipov@yandex.ru>
2025-10-29 13:06 ` syzbot
[not found] <20251029062153.ZEpQh%dmantipov@yandex.ru>
2025-10-29 8:56 ` syzbot
[not found] <20251028182255.i5pLj%dmantipov@yandex.ru>
2025-10-28 21:54 ` syzbot
[not found] <20251028182104.36i6Z%dmantipov@yandex.ru>
2025-10-28 20:48 ` syzbot
[not found] <20251028181937.VGTo3%dmantipov@yandex.ru>
2025-10-28 19:31 ` syzbot
[not found] <20251028104159.Yh5Ro%dmantipov@yandex.ru>
2025-10-28 10:50 ` syzbot
[not found] <20251028104120.GnIG9%dmantipov@yandex.ru>
2025-10-28 10:46 ` syzbot
[not found] <20251028104006.trzAA%dmantipov@yandex.ru>
2025-10-28 10:44 ` syzbot
[not found] <20251024071532.gsUD9%dmantipov@yandex.ru>
2025-10-24 14:04 ` syzbot
[not found] <20251024071521.fbtQk%dmantipov@yandex.ru>
2025-10-24 12:42 ` syzbot
[not found] <20251022140016.A5JqV%dmantipov@yandex.ru>
2025-10-22 14:36 ` syzbot
[not found] <20241227105402.odBU4%dmantipov@yandex.ru>
2024-12-27 11:38 ` syzbot
[not found] <20241226155305.Yro_e%dmantipov@yandex.ru>
2024-12-26 16:26 ` syzbot
2024-12-25 16:47 syzbot
2026-01-15 3:46 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=68fb4792.050a0220.346f24.00b8.GAE@google.com \
--to=syzbot+7aef76bdb53b83d62a9e@syzkaller.appspotmail.com \
--cc=dmantipov@yandex.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.