From: syzbot <syzbot+77026564530dbc29b854@syzkaller.appspotmail.com>
To: dmantipov@yandex.ru, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [ocfs2?] UBSAN: array-index-out-of-bounds in ocfs2_block_group_fill
Date: Wed, 29 Oct 2025 00:43:01 -0700 [thread overview]
Message-ID: <6901c585.050a0220.32483.0201.GAE@google.com> (raw)
In-Reply-To: <20251029062152.Ai6wl%dmantipov@yandex.ru>
Hello,
syzbot tried to test the proposed patch but the build/boot failed:
] bridge0: port 2(bridge_slave_1) entered disabled state
[ 56.957882][ T6076] 8021q: adding VLAN 0 to HW filter on device bond0
[ 56.968605][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1: link becomes ready
[ 56.976718][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
[ 56.985854][ T6076] 8021q: adding VLAN 0 to HW filter on device team0
[ 57.000775][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bridge: link becomes ready
[ 57.009397][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_0: link becomes ready
[ 57.017915][ T23] bridge0: port 1(bridge_slave_0) entered blocking state
[ 57.024986][ T23] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 57.034664][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bridge: link becomes ready
[ 57.043651][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): bridge_slave_1: link becomes ready
[ 57.052353][ T23] bridge0: port 2(bridge_slave_1) entered blocking state
[ 57.059422][ T23] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 57.069264][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_bond: link becomes ready
[ 57.086208][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_bond: link becomes ready
[ 57.096392][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_team: link becomes ready
[ 57.105116][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_0: link becomes ready
[ 57.113880][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready
[ 57.128986][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_team: link becomes ready
[ 57.137517][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): team_slave_1: link becomes ready
[ 57.148336][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_hsr: link becomes ready
[ 57.156564][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_0: link becomes ready
[ 57.167288][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_hsr: link becomes ready
[ 57.175546][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): hsr_slave_1: link becomes ready
[ 57.185362][ T6076] IPv6: ADDRCONF(NETDEV_CHANGE): hsr0: link becomes ready
[ 57.245154][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan1: link becomes ready
[ 57.253095][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): vxcan0: link becomes ready
[ 57.262418][ T6076] 8021q: adding VLAN 0 to HW filter on device batadv0
[ 57.280281][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_virt_wifi: link becomes ready
[ 57.289126][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_virt_wifi: link becomes ready
[ 57.310768][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_vlan: link becomes ready
[ 57.319606][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_vlan: link becomes ready
[ 57.328599][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): vlan0: link becomes ready
[ 57.336290][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): vlan1: link becomes ready
[ 57.345386][ T6076] device veth0_vlan entered promiscuous mode
[ 57.356188][ T6076] device veth1_vlan entered promiscuous mode
[ 57.380237][ T6076] device veth0_macvtap entered promiscuous mode
[ 57.388136][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan0: link becomes ready
[ 57.397218][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): macvlan1: link becomes ready
[ 57.405258][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_macvtap: link becomes ready
[ 57.414356][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_macvtap: link becomes ready
[ 57.422971][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): macvtap0: link becomes ready
[ 57.434451][ T6076] device veth1_macvtap entered promiscuous mode
[ 57.451925][ T6076] batman_adv: batadv0: Interface activated: batadv_slave_0
[ 57.459716][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): macsec0: link becomes ready
[ 57.467942][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_0: link becomes ready
[ 57.476921][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth0_to_batadv: link becomes ready
[ 57.487661][ T6076] batman_adv: batadv0: Interface activated: batadv_slave_1
[ 57.497109][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): batadv_slave_1: link becomes ready
[ 57.505841][ T23] IPv6: ADDRCONF(NETDEV_CHANGE): veth1_to_batadv: link becomes ready
[ 57.515082][ T6076] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[ 57.524045][ T6076] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[ 57.532999][ T6076] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[ 57.542687][ T6076] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[ 57.596174][ C1] ================================================================================
[ 57.605482][ C1] UBSAN: signed-integer-overflow in ./arch/x86/include/asm/atomic.h:165:11
[ 57.614205][ C1] 1648931972 + 931318806 cannot be represented in type 'int'
[ 57.621709][ C1] CPU: 1 PID: 5335 Comm: udevd Not tainted syzkaller #0
[ 57.628644][ C1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
[ 57.636275][ T6103] IPVS: ftp: loaded support on port[0] = 21
[ 57.638698][ C1] Call Trace:
[ 57.647934][ C1] <IRQ>
[ 57.650792][ C1] dump_stack+0xfd/0x16e
[ 57.655044][ C1] ubsan_epilogue+0xa/0x30
[ 57.659458][ C1] handle_overflow+0x192/0x1b0
[ 57.664231][ C1] ip_idents_reserve+0x14a/0x170
[ 57.669170][ C1] __ip_select_ident+0xe4/0x1c0
[ 57.674024][ C1] iptunnel_xmit+0x468/0x850
[ 57.678608][ C1] udp_tunnel_xmit_skb+0x1ba/0x290
[ 57.683784][ C1] geneve_xmit+0x1d03/0x2130
[ 57.688362][ C1] dev_hard_start_xmit+0x2a8/0x7f0
[ 57.693468][ C1] __dev_queue_xmit+0x1690/0x2970
[ 57.698490][ C1] ip6_finish_output2+0x101e/0x1490
[ 57.703901][ C1] NF_HOOK+0x45/0x2c0
[ 57.707879][ C1] ? NF_HOOK+0x2c0/0x2c0
[ 57.712114][ C1] mld_sendpack+0x5f7/0xa60
[ 57.716612][ C1] mld_ifc_timer_expire+0x7e1/0x990
[ 57.721953][ C1] ? lock_acquire+0x78/0x330
[ 57.726523][ C1] ? lock_release+0x69/0x640
[ 57.731103][ C1] ? mld_gq_timer_expire+0xe0/0xe0
[ 57.736194][ C1] call_timer_fn+0x103/0x490
[ 57.740767][ C1] ? mld_gq_timer_expire+0xe0/0xe0
[ 57.745873][ C1] __run_timers+0x5d8/0x7a0
[ 57.750375][ C1] run_timer_softirq+0x63/0xf0
[ 57.755140][ C1] __do_softirq+0x267/0x92e
[ 57.759637][ C1] ? asm_call_irq_on_stack+0xf/0x20
[ 57.764814][ C1] asm_call_irq_on_stack+0xf/0x20
[ 57.769809][ C1] </IRQ>
[ 57.772727][ C1] do_softirq_own_stack+0x9b/0xe0
[ 57.777734][ C1] __irq_exit_rcu+0x227/0x230
[ 57.782383][ C1] irq_exit_rcu+0x5/0x20
[ 57.786602][ C1] sysvec_apic_timer_interrupt+0xea/0x100
[ 57.792290][ C1] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 57.798260][ C1] RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x60
[ 57.804302][ C1] Code: 66 2e 0f 1f 84 00 00 00 00 00 be 0d 00 00 00 48 c7 c7 20 b4 54 8b e8 8f 64 3e 00 c3 cc cc cc cc 00 00 cc cc 00 00 cc cc 00 00 <48> 8b 04 24 65 48 8b 0d 34 d7 90 7e 65 8b 15 39 d7 90 7e f7 c2 00
[ 57.823981][ C1] RSP: 0018:ffffc90000f5fbe8 EFLAGS: 00000287
[ 57.830031][ C1] RAX: ffffffff8354fa11 RBX: ffff8880242ccfda RCX: 0000000000000000
[ 57.837990][ C1] RDX: ffff88802e700000 RSI: 000000000000000e RDI: 000000000000005e
[ 57.845980][ C1] RBP: 000000000000000e R08: 0000000059ee1630 R09: 0000000004ea9dbc
[ 57.854015][ C1] R10: 00000000e66b8ec4 R11: 1ffffffff1964e1d R12: 000000000000002f
[ 57.862094][ C1] R13: 0000000000000023 R14: 0000000000000000 R15: ffff888019809300
[ 57.870056][ C1] ? tomoyo_encode2+0x261/0x480
[ 57.874883][ C1] tomoyo_encode2+0x26c/0x480
[ 57.879536][ C1] tomoyo_realpath_from_path+0x5ce/0x620
[ 57.885172][ C1] tomoyo_path_perm+0x15b/0x450
[ 57.890017][ C1] security_inode_getattr+0xd2/0x130
[ 57.895302][ C1] __x64_sys_newfstat+0xa7/0x160
[ 57.900235][ C1] do_syscall_64+0x34/0x50
[ 57.904801][ C1] entry_SYSCALL_64_after_hwframe+0x67/0xd1
[ 57.910696][ C1] RIP: 0033:0x7f14545d9ad7
[ 57.915097][ C1] Code: 73 01 c3 48 8b 0d 21 f3 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 05 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 f1 f2 0d 00 f7 d8 64 89 02 b8
[ 57.934686][ C1] RSP: 002b:00007ffe7f42e5c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000005
[ 57.943080][ C1] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f14545d9ad7
[ 57.951032][ C1] RDX: 0000000000090800 RSI: 00007ffe7f42e5d0 RDI: 000000000000000d
[ 57.958980][ C1] RBP: 00007ffe7f42e5d0 R08: 0000000000000000 R09: 0000000000000001
[ 57.966947][ C1] R10: 0000000000000000 R11: 0000000000000202 R12: 000055a2452227b0
[ 57.974897][ C1] R13: 00000000000000ff R14: 000055a2354e0be0 R15: 00007ffe7f42e8f0
[ 57.982917][ C1] ================================================================================
[ 57.992234][ C1] Kernel panic - not syncing: UBSAN: panic_on_warn set ...
[ 57.999416][ C1] CPU: 1 PID: 5335 Comm: udevd Not tainted syzkaller #0
[ 58.006329][ C1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
[ 58.016454][ C1] Call Trace:
[ 58.019807][ C1] <IRQ>
[ 58.022646][ C1] dump_stack+0xfd/0x16e
[ 58.026862][ C1] panic+0x2f0/0x9c0
[ 58.030733][ C1] check_panic_on_warn+0x95/0xe0
[ 58.035656][ C1] handle_overflow+0x192/0x1b0
[ 58.040394][ C1] ip_idents_reserve+0x14a/0x170
[ 58.045333][ C1] __ip_select_ident+0xe4/0x1c0
[ 58.050526][ C1] iptunnel_xmit+0x468/0x850
[ 58.055096][ C1] udp_tunnel_xmit_skb+0x1ba/0x290
[ 58.060281][ C1] geneve_xmit+0x1d03/0x2130
[ 58.064858][ C1] dev_hard_start_xmit+0x2a8/0x7f0
[ 58.069947][ C1] __dev_queue_xmit+0x1690/0x2970
[ 58.074997][ C1] ip6_finish_output2+0x101e/0x1490
[ 58.080172][ C1] NF_HOOK+0x45/0x2c0
[ 58.084137][ C1] ? NF_HOOK+0x2c0/0x2c0
[ 58.088358][ C1] mld_sendpack+0x5f7/0xa60
[ 58.092843][ C1] mld_ifc_timer_expire+0x7e1/0x990
[ 58.098027][ C1] ? lock_acquire+0x78/0x330
[ 58.102587][ C1] ? lock_release+0x69/0x640
[ 58.107152][ C1] ? mld_gq_timer_expire+0xe0/0xe0
[ 58.112240][ C1] call_timer_fn+0x103/0x490
[ 58.116802][ C1] ? mld_gq_timer_expire+0xe0/0xe0
[ 58.121880][ C1] __run_timers+0x5d8/0x7a0
[ 58.126446][ C1] run_timer_softirq+0x63/0xf0
[ 58.131181][ C1] __do_softirq+0x267/0x92e
[ 58.135655][ C1] ? asm_call_irq_on_stack+0xf/0x20
[ 58.140924][ C1] asm_call_irq_on_stack+0xf/0x20
[ 58.146007][ C1] </IRQ>
[ 58.148951][ C1] do_softirq_own_stack+0x9b/0xe0
[ 58.153948][ C1] __irq_exit_rcu+0x227/0x230
[ 58.158601][ C1] irq_exit_rcu+0x5/0x20
[ 58.162816][ C1] sysvec_apic_timer_interrupt+0xea/0x100
[ 58.168517][ C1] asm_sysvec_apic_timer_interrupt+0x12/0x20
[ 58.174470][ C1] RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x60
[ 58.180507][ C1] Code: 66 2e 0f 1f 84 00 00 00 00 00 be 0d 00 00 00 48 c7 c7 20 b4 54 8b e8 8f 64 3e 00 c3 cc cc cc cc 00 00 cc cc 00 00 cc cc 00 00 <48> 8b 04 24 65 48 8b 0d 34 d7 90 7e 65 8b 15 39 d7 90 7e f7 c2 00
[ 58.200096][ C1] RSP: 0018:ffffc90000f5fbe8 EFLAGS: 00000287
[ 58.206224][ C1] RAX: ffffffff8354fa11 RBX: ffff8880242ccfda RCX: 0000000000000000
[ 58.214171][ C1] RDX: ffff88802e700000 RSI: 000000000000000e RDI: 000000000000005e
[ 58.222116][ C1] RBP: 000000000000000e R08: 0000000059ee1630 R09: 0000000004ea9dbc
[ 58.230069][ C1] R10: 00000000e66b8ec4 R11: 1ffffffff1964e1d R12: 000000000000002f
[ 58.238112][ C1] R13: 0000000000000023 R14: 0000000000000000 R15: ffff888019809300
[ 58.246077][ C1] ? tomoyo_encode2+0x261/0x480
[ 58.250921][ C1] tomoyo_encode2+0x26c/0x480
[ 58.255576][ C1] tomoyo_realpath_from_path+0x5ce/0x620
[ 58.261186][ C1] tomoyo_path_perm+0x15b/0x450
[ 58.266035][ C1] security_inode_getattr+0xd2/0x130
[ 58.271303][ C1] __x64_sys_newfstat+0xa7/0x160
[ 58.276216][ C1] do_syscall_64+0x34/0x50
[ 58.280633][ C1] entry_SYSCALL_64_after_hwframe+0x67/0xd1
[ 58.286497][ C1] RIP: 0033:0x7f14545d9ad7
[ 58.290886][ C1] Code: 73 01 c3 48 8b 0d 21 f3 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 05 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 f1 f2 0d 00 f7 d8 64 89 02 b8
[ 58.310729][ C1] RSP: 002b:00007ffe7f42e5c8 EFLAGS: 00000202 ORIG_RAX: 0000000000000005
[ 58.319116][ C1] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f14545d9ad7
[ 58.327065][ C1] RDX: 0000000000090800 RSI: 00007ffe7f42e5d0 RDI: 000000000000000d
[ 58.335014][ C1] RBP: 00007ffe7f42e5d0 R08: 0000000000000000 R09: 0000000000000001
[ 58.342967][ C1] R10: 0000000000000000 R11: 0000000000000202 R12: 000055a2452227b0
[ 58.350913][ C1] R13: 00000000000000ff R14: 000055a2354e0be0 R15: 00007ffe7f42e8f0
[ 58.359252][ C1] Kernel Offset: disabled
[ 58.363605][ C1] Rebooting in 86400 seconds..
syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build3025266266=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.24.4'
GOWORK=''
PKG_CONFIG='pkg-config'
git status (err=<nil>)
HEAD detached at b6605ba8b96
nothing to commit, working tree clean
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=b6605ba8b96835063c5eb766c38d27fac98b84d4 -X github.com/google/syzkaller/prog.gitRevisionDate=20251013-102005" ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=b6605ba8b96835063c5eb766c38d27fac98b84d4 -X github.com/google/syzkaller/prog.gitRevisionDate=20251013-102005" ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=b6605ba8b96835063c5eb766c38d27fac98b84d4 -X github.com/google/syzkaller/prog.gitRevisionDate=20251013-102005" -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_amd64
g++ -o ./bin/linux_amd64/syz-executor executor/executor.cc \
-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include -DGOOS_linux=1 -DGOARCH_amd64=1 \
-DHOSTGOOS_linux=1 -DGIT_REVISION=\"b6605ba8b96835063c5eb766c38d27fac98b84d4\"
/usr/bin/ld: /tmp/ccYc8exG.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x104): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null
Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=13f7f614580000
Tested on:
commit: d3d0b4e2 Linux 5.10.245
git tree: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git linux-5.10.y
kernel config: https://syzkaller.appspot.com/x/.config?x=6e4052b2d7feb092
dashboard link: https://syzkaller.appspot.com/bug?extid=77026564530dbc29b854
compiler: Debian clang version 20.1.8 (++20250708063551+0c9f909b7976-1~exp1~20250708183702.136), Debian LLD 20.1.8
patch: https://syzkaller.appspot.com/x/patch.diff?x=13cbf614580000
next parent reply other threads:[~2025-10-29 7:43 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20251029062152.Ai6wl%dmantipov@yandex.ru>
2025-10-29 7:43 ` syzbot [this message]
[not found] <20251029062741.W5kof%dmantipov@yandex.ru>
2025-10-29 8:28 ` [syzbot] [ocfs2?] UBSAN: array-index-out-of-bounds in ocfs2_block_group_fill syzbot
[not found] <20251029062547.hO0d8%dmantipov@yandex.ru>
2025-10-29 8:05 ` syzbot
[not found] <20251028182253.F7MbO%dmantipov@yandex.ru>
2025-10-28 19:24 ` syzbot
[not found] <20251028182101.6rEOg%dmantipov@yandex.ru>
2025-10-28 18:52 ` syzbot
[not found] <20251028181936.web8g%dmantipov@yandex.ru>
2025-10-28 18:34 ` syzbot
[not found] <20251028104158.qdBzD%dmantipov@yandex.ru>
2025-10-28 10:56 ` syzbot
[not found] <20251028104119.eKN8w%dmantipov@yandex.ru>
2025-10-28 10:56 ` syzbot
[not found] <20251028104005.R1CUs%dmantipov@yandex.ru>
2025-10-28 10:54 ` syzbot
[not found] <20251028070157.yQX9a%dmantipov@yandex.ru>
2025-10-28 7:49 ` syzbot
[not found] <20251024071531.TCWyW%dmantipov@yandex.ru>
2025-10-24 10:49 ` syzbot
[not found] <20251024071520.ZEdh5%dmantipov@yandex.ru>
2025-10-24 10:07 ` syzbot
[not found] <20251024071153.WcJfz%dmantipov@yandex.ru>
2025-10-24 8:31 ` syzbot
[not found] <20251022121312.jibxD%dmantipov@yandex.ru>
2025-10-22 12:46 ` syzbot
[not found] <28b06392-394e-4c77-a4db-5174cb605834@yandex.ru>
2025-10-17 11:26 ` syzbot
[not found] <20251015064502.30763-1-kartikey406@gmail.com>
2025-10-15 7:12 ` syzbot
[not found] <d8a13302-3be4-4ad7-a1f0-263bb9dc1ba4@yandex.ru>
2025-10-15 6:21 ` syzbot
[not found] <20251015044637.4721-1-kartikey406@gmail.com>
2025-10-15 5:15 ` syzbot
2025-10-15 2:12 syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6901c585.050a0220.32483.0201.GAE@google.com \
--to=syzbot+77026564530dbc29b854@syzkaller.appspotmail.com \
--cc=dmantipov@yandex.ru \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.