All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+05f9cecd28e356241aba@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
	 syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [net?] INFO: task hung in new_device_store (5)
Date: Tue, 30 Dec 2025 01:38:03 -0800	[thread overview]
Message-ID: <69539d7b.050a0220.329c0f.0569.GAE@google.com> (raw)
In-Reply-To: <20251230091109.1876-1-hdanton@sina.com>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

SYZFAIL: failed to recv rpc

SYZFAIL: failed to recv rpc
fd=3 want=4 recv=0 n=0 (errno 9: Bad file descriptor)


Warning: Permanently added '10.128.1.232' (ED25519) to the list of known hosts.
1970/01/01 00:00:31 parsed 1 programs
[   32.471623][ T6575] cgroup: Unknown subsys name 'net'
[   32.602037][ T6575] cgroup: Unknown subsys name 'cpuset'
[   32.604289][ T6575] cgroup: Unknown subsys name 'rlimit'
Setting up swapspace version 1, size = 127995904 bytes
[   32.779944][ T6575] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k SS
[   36.840617][ T6590] soft_limit_in_bytes is deprecated and will be removed. Please report your usecase to linux-mm@kvack.org if you depend on this functionality.
[   36.909920][  T599] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   36.911765][  T599] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   36.968895][ T6612] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   36.970758][ T6612] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   36.972197][ T6612] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   36.973473][   T13] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   36.973485][   T13] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   36.978733][ T6612] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   36.999923][ T6612] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   37.087028][ T6617] chnl_net:caif_netlink_parms(): no params data found
[   37.291730][ T6617] bridge0: port 1(bridge_slave_0) entered blocking state
[   37.293670][ T6617] bridge0: port 1(bridge_slave_0) entered disabled state
[   37.295614][ T6617] bridge_slave_0: entered allmulticast mode
[   37.297924][ T6617] bridge_slave_0: entered promiscuous mode
[   37.313046][ T6617] bridge0: port 2(bridge_slave_1) entered blocking state
[   37.314522][ T6617] bridge0: port 2(bridge_slave_1) entered disabled state
[   37.314662][ T6617] bridge_slave_1: entered allmulticast mode
[   37.317432][ T6617] bridge_slave_1: entered promiscuous mode
[   37.342493][ T6617] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   37.364082][ T6617] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   37.393439][ T6617] team0: Port device team_slave_0 added
[   37.445234][ T6617] team0: Port device team_slave_1 added
[   37.530482][ T6617] batman_adv: batadv0: Adding interface: batadv_slave_0
[   37.530542][ T6617] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   37.530571][ T6617] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   37.531578][ T6617] batman_adv: batadv0: Adding interface: batadv_slave_1
[   37.531585][ T6617] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   37.531597][ T6617] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   37.613066][ T6617] hsr_slave_0: entered promiscuous mode
[   37.613546][ T6617] hsr_slave_1: entered promiscuous mode
[   37.935809][ T6617] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   37.938615][ T6617] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   37.944230][ T6617] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   37.955917][ T6617] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   37.986946][ T6617] 8021q: adding VLAN 0 to HW filter on device bond0
[   37.994296][ T6617] 8021q: adding VLAN 0 to HW filter on device team0
[   37.996204][ T3257] bridge0: port 1(bridge_slave_0) entered blocking state
[   37.996240][ T3257] bridge0: port 1(bridge_slave_0) entered forwarding state
[   38.001927][   T13] bridge0: port 2(bridge_slave_1) entered blocking state
[   38.001962][   T13] bridge0: port 2(bridge_slave_1) entered forwarding state
[   38.157489][ T6617] 8021q: adding VLAN 0 to HW filter on device batadv0
[   38.225710][ T6617] veth0_vlan: entered promiscuous mode
[   38.227497][ T6617] veth1_vlan: entered promiscuous mode
[   38.234578][ T6617] veth0_macvtap: entered promiscuous mode
[   38.235624][ T6617] veth1_macvtap: entered promiscuous mode
[   38.239734][ T6617] batman_adv: batadv0: Interface activated: batadv_slave_0
[   38.240999][ T6617] batman_adv: batadv0: Interface activated: batadv_slave_1
[   38.245343][   T13] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   38.246933][   T13] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   38.248857][   T13] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   38.251096][   T13] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
1970/01/01 00:00:38 executed programs: 0
[   38.386255][   T53] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   38.388034][   T53] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   38.389544][   T53] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   38.391680][   T53] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   38.393243][   T53] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   38.625250][ T6681] chnl_net:caif_netlink_parms(): no params data found
[   38.878994][ T3257] netdevsim netdevsim0 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   38.881792][ T6681] bridge0: port 1(bridge_slave_0) entered blocking state
[   38.881870][ T6681] bridge0: port 1(bridge_slave_0) entered disabled state
[   38.881988][ T6681] bridge_slave_0: entered allmulticast mode
[   38.882458][ T6681] bridge_slave_0: entered promiscuous mode
[   38.883287][ T6681] bridge0: port 2(bridge_slave_1) entered blocking state
[   38.883307][ T6681] bridge0: port 2(bridge_slave_1) entered disabled state
[   38.883360][ T6681] bridge_slave_1: entered allmulticast mode
[   38.883761][ T6681] bridge_slave_1: entered promiscuous mode
[   38.896150][ T6681] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   38.897081][ T6681] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   38.905934][ T6681] team0: Port device team_slave_0 added
[   38.907754][ T6681] team0: Port device team_slave_1 added
[   38.915307][ T6681] batman_adv: batadv0: Adding interface: batadv_slave_0
[   38.915331][ T6681] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   38.915350][ T6681] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   38.915856][ T6681] batman_adv: batadv0: Adding interface: batadv_slave_1
[   38.915862][ T6681] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   38.915874][ T6681] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   38.936180][ T6681] hsr_slave_0: entered promiscuous mode
[   38.936515][ T6681] hsr_slave_1: entered promiscuous mode
[   38.936718][ T6681] debugfs: 'hsr0' already exists in 'hsr'
[   38.936758][ T6681] Cannot create hsr debugfs directory
[   38.943893][ T3257] netdevsim netdevsim0 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   38.985257][ T3257] netdevsim netdevsim0 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   39.035979][ T3257] netdevsim netdevsim0 netdevsim0 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   40.430477][   T53] Bluetooth: hci0: command tx timeout
[   41.570853][ T3257] bridge_slave_1: left allmulticast mode
[   41.572709][ T3257] bridge_slave_1: left promiscuous mode
[   41.574227][ T3257] bridge0: port 2(bridge_slave_1) entered disabled state
[   41.577301][ T3257] bridge_slave_0: left allmulticast mode
[   41.577324][ T3257] bridge_slave_0: left promiscuous mode
[   41.577479][ T3257] bridge0: port 1(bridge_slave_0) entered disabled state
[   41.722713][ T3257] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[   41.771484][ T3257] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[   41.790991][ T3257] bond0 (unregistering): Released all slaves
[   41.865272][ T3257] hsr_slave_0: left promiscuous mode
[   41.866254][ T3257] hsr_slave_1: left promiscuous mode
[   41.866541][ T3257] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[   41.866558][ T3257] batman_adv: batadv0: Removing interface: batadv_slave_0
[   41.867038][ T3257] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[   41.867047][ T3257] batman_adv: batadv0: Removing interface: batadv_slave_1
[   41.872015][ T3257] veth1_macvtap: left promiscuous mode
[   41.872060][ T3257] veth0_macvtap: left promiscuous mode
[   41.872108][ T3257] veth1_vlan: left promiscuous mode
[   41.872153][ T3257] veth0_vlan: left promiscuous mode
[   41.995869][ T3257] team0 (unregistering): Port device team_slave_1 removed
[   42.002376][ T3257] team0 (unregistering): Port device team_slave_0 removed
[   42.386710][ T6681] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   42.391513][ T6681] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   42.394382][ T6681] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   42.397224][ T6681] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   42.435096][ T6681] 8021q: adding VLAN 0 to HW filter on device bond0
[   42.446667][ T6681] 8021q: adding VLAN 0 to HW filter on device team0
[   42.451278][  T819] bridge0: port 1(bridge_slave_0) entered blocking state
[   42.451317][  T819] bridge0: port 1(bridge_slave_0) entered forwarding state
[   42.453888][  T666] bridge0: port 2(bridge_slave_1) entered blocking state
[   42.453907][  T666] bridge0: port 2(bridge_slave_1) entered forwarding state
[   42.500707][   T53] Bluetooth: hci0: command tx timeout
[   42.511046][ T6681] 8021q: adding VLAN 0 to HW filter on device batadv0
[   42.521729][ T6681] veth0_vlan: entered promiscuous mode
[   42.524564][ T6681] veth1_vlan: entered promiscuous mode
[   42.533888][ T6681] veth0_macvtap: entered promiscuous mode
[   42.534904][ T6681] veth1_macvtap: entered promiscuous mode
[   42.538062][ T6681] batman_adv: batadv0: Interface activated: batadv_slave_0
[   42.541051][ T6681] batman_adv: batadv0: Interface activated: batadv_slave_1
[   42.544378][  T819] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   42.545881][  T819] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   42.547594][  T819] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   42.548994][  T819] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   42.575303][  T819] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   42.577497][  T819] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   42.585352][  T666] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   42.586324][  T666] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
SYZFAIL: failed to recv rpc
fd=3 want=4 recv=0 n=0 (errno 9: Bad file descriptor)


syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build1911780612=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.24.4'
GOWORK=''
PKG_CONFIG='pkg-config'

git status (err=<nil>)
HEAD detached at d6526ea3e
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=d6526ea3e6ad9081c902859bbb80f9f840377cb4 -X github.com/google/syzkaller/prog.gitRevisionDate=20251126-113115"  ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=d6526ea3e6ad9081c902859bbb80f9f840377cb4 -X github.com/google/syzkaller/prog.gitRevisionDate=20251126-113115"  ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=arm64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=d6526ea3e6ad9081c902859bbb80f9f840377cb4 -X github.com/google/syzkaller/prog.gitRevisionDate=20251126-113115"  -o ./bin/linux_arm64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_arm64
aarch64-linux-gnu-g++ -o ./bin/linux_arm64/syz-executor executor/executor.cc \
	-O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include   -DGOOS_linux=1 -DGOARCH_arm64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"d6526ea3e6ad9081c902859bbb80f9f840377cb4\"
/usr/lib/gcc-cross/aarch64-linux-gnu/12/../../../../aarch64-linux-gnu/bin/ld: /tmp/ccHJUo9o.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0xd8): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null



Tested on:

commit:         8640b745 Merge tag 'kbuild-fixes-6.19-1' of git://git...
git tree:       upstream
kernel config:  https://syzkaller.appspot.com/x/.config?x=8a8594efdc14f07a
dashboard link: https://syzkaller.appspot.com/bug?extid=05f9cecd28e356241aba
compiler:       Debian clang version 20.1.8 (++20250708063551+0c9f909b7976-1~exp1~20250708183702.136), Debian LLD 20.1.8
userspace arch: arm64
patch:          https://syzkaller.appspot.com/x/patch.diff?x=1067949a580000


  reply	other threads:[~2025-12-30  9:38 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-09-26 17:58 [syzbot] [net?] INFO: task hung in new_device_store (5) syzbot
2024-09-26 20:14 ` Eric Dumazet
2024-09-27 11:04   ` Hillf Danton
2024-09-27 11:24     ` Eric Dumazet
2024-09-27 11:27       ` Eric Dumazet
2024-09-27 11:41       ` Hillf Danton
2024-09-27 11:54         ` Eric Dumazet
2024-09-28  0:06           ` Hillf Danton
2024-10-09  8:20 ` syzbot
2025-12-25 16:24 ` syzbot
2025-12-29  6:36   ` Tetsuo Handa
2025-12-29  7:02     ` syzbot
2025-12-29  9:36       ` Tetsuo Handa
2025-12-29 12:22         ` syzbot
2025-12-29 14:18           ` Tetsuo Handa
2025-12-29 15:10             ` syzbot
2025-12-30  1:29               ` Tetsuo Handa
2025-12-30  2:08                 ` syzbot
2025-12-30  3:07                   ` Tetsuo Handa
2025-12-30  3:33                     ` syzbot
2025-12-30  9:11                       ` Hillf Danton
2025-12-30  9:38                         ` syzbot [this message]
2025-12-30 13:24                       ` Tetsuo Handa
2025-12-30 14:18                         ` syzbot
2026-01-02 10:18                           ` Tetsuo Handa
2026-01-02 10:53                             ` syzbot
2026-01-03  9:59                               ` Tetsuo Handa
2026-01-03 11:24                                 ` syzbot
2026-01-03 14:07                                   ` Tetsuo Handa
2026-01-03 14:33                                     ` syzbot
2025-12-30  7:48   ` Tetsuo Handa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=69539d7b.050a0220.329c0f.0569.GAE@google.com \
    --to=syzbot+05f9cecd28e356241aba@syzkaller.appspotmail.com \
    --cc=hdanton@sina.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.