From: syzbot <syzbot+ae466a728017ec940b41@syzkaller.appspotmail.com>
To: hdanton@sina.com, linux-kernel@vger.kernel.org,
syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [media?] KASAN: slab-use-after-free Read in dvb_frontend_release (3)
Date: Sat, 21 Feb 2026 14:23:03 -0800 [thread overview]
Message-ID: <699a3047.050a0220.340abe.0d2b.GAE@google.com> (raw)
In-Reply-To: <20260221215717.3315-1-hdanton@sina.com>
Hello,
syzbot tried to test the proposed patch but the build/boot failed:
_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[ 0.324084][ T0] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[ 0.324103][ T0] ACPI: Using ACPI (MADT) for SMP configuration information
[ 0.324118][ T0] CPU topo: Max. logical packages: 1
[ 0.324122][ T0] CPU topo: Max. logical dies: 1
[ 0.324126][ T0] CPU topo: Max. dies per package: 1
[ 0.324137][ T0] CPU topo: Max. threads per core: 2
[ 0.324142][ T0] CPU topo: Num. cores per package: 1
[ 0.324146][ T0] CPU topo: Num. threads per package: 2
[ 0.324150][ T0] CPU topo: Allowing 2 present CPUs plus 0 hotplug CPUs
[ 0.324260][ T0] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.324270][ T0] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.324278][ T0] PM: hibernation: Registered nosave memory: [mem 0xbfffd000-0xffffffff]
[ 0.324303][ T0] [gap 0xc0000000-0xfffbbfff] available for PCI devices
[ 0.324309][ T0] Booting paravirtualized kernel on KVM
[ 0.324320][ T0] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.457957][ T0] Zone ranges:
[ 0.457966][ T0] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.457977][ T0] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.457985][ T0] Normal [mem 0x0000000100000000-0x000000023fffffff]
[ 0.457993][ T0] Device empty
[ 0.457998][ T0] Movable zone start for each node
[ 0.458001][ T0] Early memory node ranges
[ 0.458005][ T0] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.458011][ T0] node 0: [mem 0x0000000000100000-0x00000000bfffcfff]
[ 0.458019][ T0] node 0: [mem 0x0000000100000000-0x0000000140000fff]
[ 0.458025][ T0] node 1: [mem 0x0000000140001000-0x000000023fffffff]
[ 0.458034][ T0] Initmem setup node 0 [mem 0x0000000000001000-0x0000000140000fff]
[ 0.458049][ T0] Initmem setup node 1 [mem 0x0000000140001000-0x000000023fffffff]
[ 0.458095][ T0] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.458339][ T0] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.520754][ T0] On node 0, zone Normal: 3 pages in unavailable ranges
[ 0.583334][ T0] setup_percpu: NR_CPUS:8 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:2
[ 0.584030][ T0] percpu: Embedded 72 pages/cpu s254408 r8192 d32312 u1048576
[ 0.584054][ T0] pcpu-alloc: s254408 r8192 d32312 u1048576 alloc=1*2097152
[ 0.584066][ T0] pcpu-alloc: [0] 0 1
[ 0.584177][ T0] kvm-guest: PV spinlocks enabled
[ 0.584186][ T0] PV qspinlock hash table entries: 256 (order: 0, 4096 bytes, linear)
[ 0.584203][ T0] Kernel command line: earlyprintk=serial net.ifnames=0 sysctl.kernel.hung_task_all_cpu_backtrace=1 ima_policy=tcb nf-conntrack-ftp.ports=20000 nf-conntrack-tftp.ports=20000 nf-conntrack-sip.ports=20000 nf-conntrack-irc.ports=20000 nf-conntrack-sane.ports=20000 binder.debug_mask=0 rcupdate.rcu_expedited=1 rcupdate.rcu_cpu_stall_cputime=1 no_hash_pointers page_owner=on sysctl.vm.nr_hugepages=4 sysctl.vm.nr_overcommit_hugepages=4 secretmem.enable=1 sysctl.max_rcu_stall_to_panic=1 msr.allow_writes=off coredump_filter=0xffff root=/dev/sda console=ttyS0 vsyscall=native numa=fake=2 kvm-intel.nested=1 spec_store_bypass_disable=prctl nopcid vivid.n_devs=64 vivid.multiplanar=1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2,1,2 netrom.nr_ndevs=32 rose.rose_ndevs=32 smp.csd_lock_timeout=100000 watchdog_thresh=55 workqueue.watchdog_thresh=140 sysctl.net.core.netdev_unregister_timeout_secs=140 dummy_hcd.num=32 max_loop=32 nbds_max=32 \
[ 0.584229][ T0] Kernel command line: comedi.comedi_num_legacy_minors=4 panic_on_warn=1 BOOT_IMAGE=/boot/bzImage root=/dev/sda1 console=ttyS0
[ 0.588483][ T0] Unknown kernel command line parameters "nbds_max=32", will be passed to user space.
[ 0.588544][ T0] random: crng init done
[ 0.588547][ T0] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
[ 0.588761][ T0] software IO TLB: area num 2.
[ 0.616645][ T0] Fallback order for Node 0: 0 1
[ 0.616664][ T0] Fallback order for Node 1: 1 0
[ 0.616678][ T0] Built 2 zonelists, mobility grouping on. Total pages: 2097051
[ 0.616685][ T0] Policy zone: Normal
[ 0.617377][ T0] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[ 0.617385][ T0] stackdepot: allocating hash table via alloc_large_system_hash
[ 0.617395][ T0] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear)
[ 0.622068][ T0] stackdepot: allocating space for 8192 stack pools via memblock
[ 1.210344][ T0] **********************************************************
[ 1.210354][ T0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 1.210358][ T0] ** **
[ 1.210362][ T0] ** This system shows unhashed kernel memory addresses **
[ 1.210365][ T0] ** via the console, logs, and other interfaces. This **
[ 1.210369][ T0] ** might reduce the security of your system. **
[ 1.210373][ T0] ** **
[ 1.210376][ T0] ** If you see this message and you are not debugging **
[ 1.210380][ T0] ** the kernel, report this immediately to your system **
[ 1.210384][ T0] ** administrator! **
[ 1.210387][ T0] ** **
[ 1.210391][ T0] ** Use hash_pointers=always to force this mode off **
[ 1.210395][ T0] ** **
[ 1.210398][ T0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 1.210402][ T0] **********************************************************
[ 1.213877][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=2
[ 1.344641][ T0] allocated 167772160 bytes of page_ext
[ 1.344682][ T0] Node 0, zone DMA: page owner found early allocated 0 pages
[ 1.358368][ T0] Node 0, zone DMA32: page owner found early allocated 21120 pages
[ 1.362689][ T0] Node 0, zone Normal: page owner found early allocated 130 pages
[ 1.373648][ T0] Node 1, zone Normal: page ownserialport: Connected to syzkaller.us-central1-c.ci-upstream-kasan-gce-smack-root-test-job-parallel-0 port 1 (session ID: 27e7da33582c2a1f5960f3e4d1e08a357e0ae697147fe044510b0304e2ed012c, active connections: 1).
er found early allocated 19848 pages
[ 1.374121][ T0] Kernel/User page tables isolation: enabled
[ 1.376324][ T0] Dynamic Preempt: full
[ 1.377426][ T0] ------------[ cut here ]------------
[ 1.377431][ T0] overflows_flex_counter_type(typeof(*ctx), pwq_tbl, __count)
[ 1.377435][ T0] WARNING: kernel/workqueue.c:5373 at apply_wqattrs_prepare+0xa5/0x1f0, CPU#0: swapper/0/0
[ 1.377461][ T0] Modules linked in:
[ 1.377470][ T0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
[ 1.377481][ T0] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
[ 1.377488][ T0] RIP: 0010:apply_wqattrs_prepare+0xa5/0x1f0
[ 1.377507][ T0] Code: d8 48 c1 e8 03 42 0f b6 04 38 84 c0 0f 85 2b 01 00 00 8b 1b bf 05 00 00 00 89 de e8 55 2b 35 00 83 fb 06 0f 83 ce 00 00 00 90 <0f> 0b 90 48 c7 c0 60 61 5e 8d 48 c1 e8 03 42 80 3c 38 00 74 0c 48
[ 1.377516][ T0] RSP: 0000:ffffffff8d807bf8 EFLAGS: 00010097
[ 1.377524][ T0] RAX: ffffffff818e73bb RBX: 0000000000000000 RCX: ffffffff8d902f00
[ 1.377531][ T0] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
[ 1.377537][ T0] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
[ 1.377543][ T0] R10: dffffc0000000000 R11: fffffbfff1e912b7 R12: ffff88813fe749c8
[ 1.377550][ T0] R13: dffffc0000000000 R14: 0000000000000000 R15: dffffc0000000000
[ 1.377562][ T0] FS: 0000000000000000(0000) GS:ffff888126592000(0000) knlGS:0000000000000000
[ 1.377572][ T0] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1.377579][ T0] CR2: ffff88823ffff000 CR3: 000000000d9ba000 CR4: 00000000000000b0
[ 1.377588][ T0] Call Trace:
[ 1.377593][ T0] <TASK>
[ 1.377599][ T0] __alloc_workqueue+0xfbe/0x1e70
[ 1.377617][ T0] alloc_workqueue_noprof+0xe3/0x210
[ 1.377629][ T0] ? is_dynamic_key+0xd6/0x1c0
[ 1.377644][ T0] ? __pfx_alloc_workqueue_noprof+0x10/0x10
[ 1.377657][ T0] ? __kmalloc_cache_noprof+0x3a6/0x690
[ 1.377670][ T0] ? workqueue_init_early+0x89b/0xcf0
[ 1.377687][ T0] workqueue_init_early+0xaac/0xcf0
[ 1.377700][ T0] ? __cpuhp_setup_state+0x46/0x60
[ 1.377717][ T0] ? __pfx_workqueue_init_early+0x10/0x10
[ 1.377733][ T0] ? register_trace_event+0x3f7/0x4b0
[ 1.377749][ T0] start_kernel+0x189/0x3d0
[ 1.377760][ T0] x86_64_start_reservations+0x24/0x30
[ 1.377773][ T0] x86_64_start_kernel+0x143/0x1c0
[ 1.377786][ T0] common_startup_64+0x13e/0x147
[ 1.377804][ T0] </TASK>
[ 1.377810][ T0] Kernel panic - not syncing: kernel: panic_on_warn set ...
[ 1.377816][ T0] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)}
[ 1.377827][ T0] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
[ 1.377833][ T0] Call Trace:
[ 1.377837][ T0] <TASK>
[ 1.377840][ T0] vpanic+0x56c/0xa60
[ 1.377856][ T0] ? __pfx__printk+0x10/0x10
[ 1.377868][ T0] ? __pfx_vpanic+0x10/0x10
[ 1.377881][ T0] ? is_bpf_text_address+0x292/0x2b0
[ 1.377894][ T0] ? is_bpf_text_address+0x26/0x2b0
[ 1.377914][ T0] panic+0xc5/0xd0
[ 1.377928][ T0] ? __pfx_panic+0x10/0x10
[ 1.377947][ T0] ? common_startup_64+0x13e/0x147
[ 1.377959][ T0] __warn+0x315/0x4f0
[ 1.377973][ T0] ? apply_wqattrs_prepare+0xa5/0x1f0
[ 1.377987][ T0] ? apply_wqattrs_prepare+0xa5/0x1f0
[ 1.378000][ T0] __report_bug+0x29a/0x540
[ 1.378020][ T0] ? apply_wqattrs_prepare+0xa5/0x1f0
[ 1.378033][ T0] ? __pfx___report_bug+0x10/0x10
[ 1.378049][ T0] ? do_raw_spin_unlock+0xf6/0x210
[ 1.378064][ T0] ? _raw_spin_unlock_irqrestore+0x4c/0x80
[ 1.378074][ T0] ? rt_mutex_slowunlock+0x1cb/0x300
[ 1.378088][ T0] ? __pfx_rt_mutex_slowunlock+0x10/0x10
[ 1.378102][ T0] ? apply_wqattrs_prepare+0xa5/0x1f0
[ 1.378115][ T0] report_bug+0x16a/0x220
[ 1.378130][ T0] ? apply_wqattrs_prepare+0xa5/0x1f0
[ 1.378142][ T0] ? apply_wqattrs_prepare+0xa7/0x1f0
[ 1.378155][ T0] handle_bug+0x98/0x200
[ 1.378168][ T0] exc_invalid_op+0x1a/0x50
[ 1.378179][ T0] asm_exc_invalid_op+0x1a/0x20
[ 1.378190][ T0] RIP: 0010:apply_wqattrs_prepare+0xa5/0x1f0
[ 1.378203][ T0] Code: d8 48 c1 e8 03 42 0f b6 04 38 84 c0 0f 85 2b 01 00 00 8b 1b bf 05 00 00 00 89 de e8 55 2b 35 00 83 fb 06 0f 83 ce 00 00 00 90 <0f> 0b 90 48 c7 c0 60 61 5e 8d 48 c1 e8 03 42 80 3c 38 00 74 0c 48
[ 1.378211][ T0] RSP: 0000:ffffffff8d807bf8 EFLAGS: 00010097
[ 1.378219][ T0] RAX: ffffffff818e73bb RBX: 0000000000000000 RCX: ffffffff8d902f00
[ 1.378226][ T0] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000005
[ 1.378231][ T0] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
[ 1.378237][ T0] R10: dffffc0000000000 R11: fffffbfff1e912b7 R12: ffff88813fe749c8
[ 1.378244][ T0] R13: dffffc0000000000 R14: 0000000000000000 R15: dffffc0000000000
[ 1.378254][ T0] ? apply_wqattrs_prepare+0x9b/0x1f0
[ 1.378270][ T0] ? apply_wqattrs_prepare+0x9b/0x1f0
[ 1.378284][ T0] __alloc_workqueue+0xfbe/0x1e70
[ 1.378300][ T0] alloc_workqueue_noprof+0xe3/0x210
[ 1.378312][ T0] ? is_dynamic_key+0xd6/0x1c0
[ 1.378326][ T0] ? __pfx_alloc_workqueue_noprof+0x10/0x10
[ 1.378339][ T0] ? __kmalloc_cache_noprof+0x3a6/0x690
[ 1.378351][ T0] ? workqueue_init_early+0x89b/0xcf0
[ 1.378367][ T0] workqueue_init_early+0xaac/0xcf0
[ 1.378380][ T0] ? __cpuhp_setup_state+0x46/0x60
[ 1.378396][ T0] ? __pfx_workqueue_init_early+0x10/0x10
[ 1.378412][ T0] ? register_trace_event+0x3f7/0x4b0
[ 1.378426][ T0] start_kernel+0x189/0x3d0
[ 1.378436][ T0] x86_64_start_reservations+0x24/0x30
[ 1.378449][ T0] x86_64_start_kernel+0x143/0x1c0
[ 1.378462][ T0] common_startup_64+0x13e/0x147
[ 1.378479][ T0] </TASK>
syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build634184225=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.24.4'
GOWORK=''
PKG_CONFIG='pkg-config'
git status (err=<nil>)
HEAD detached at 1e62d19825
nothing to commit, working tree clean
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=1e62d1982527c3b4e18df04d61f2560fa1f434cc -X github.com/google/syzkaller/prog.gitRevisionDate=20260213-152336" ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=1e62d1982527c3b4e18df04d61f2560fa1f434cc -X github.com/google/syzkaller/prog.gitRevisionDate=20260213-152336" ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=1e62d1982527c3b4e18df04d61f2560fa1f434cc -X github.com/google/syzkaller/prog.gitRevisionDate=20260213-152336" -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_amd64
g++ -o ./bin/linux_amd64/syz-executor executor/executor.cc \
-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include -DGOOS_linux=1 -DGOARCH_amd64=1 \
-DHOSTGOOS_linux=1 -DGIT_REVISION=\"1e62d1982527c3b4e18df04d61f2560fa1f434cc\"
/usr/bin/ld: /tmp/ccZjc2ZB.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x386): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null
Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=17938152580000
Tested on:
commit: 8934827d Merge tag 'kmalloc_obj-treewide-v7.0-rc1' of ..
git tree: upstream
kernel config: https://syzkaller.appspot.com/x/.config?x=5ca447d428dc7079
dashboard link: https://syzkaller.appspot.com/bug?extid=ae466a728017ec940b41
compiler: Debian clang version 21.1.8 (++20251221033036+2078da43e25a-1~exp1~20251221153213.50), Debian LLD 21.1.8
patch: https://syzkaller.appspot.com/x/patch.diff?x=114b7c02580000
next prev parent reply other threads:[~2026-02-21 22:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-02-14 12:34 [syzbot] [media?] KASAN: slab-use-after-free Read in dvb_frontend_release (3) syzbot
2026-02-16 9:34 ` syzbot
2026-02-21 13:40 ` Hillf Danton
2026-02-21 13:58 ` syzbot
2026-02-21 14:35 ` Hillf Danton
2026-02-21 14:53 ` syzbot
2026-02-21 21:57 ` Hillf Danton
2026-02-21 22:23 ` syzbot [this message]
2026-02-22 12:15 ` Hillf Danton
2026-02-22 12:46 ` syzbot
2026-02-23 4:06 ` Hillf Danton
2026-02-23 5:26 ` syzbot
2026-02-19 18:43 ` Forwarded: " syzbot
2026-02-19 18:54 ` syzbot
2026-02-20 6:49 ` syzbot
2026-04-16 13:14 ` Forwarded: syzbot
[not found] <CAD9jT-cVX1GVH30EAGvQkbxsDRyuSug1Zcz8Fi-NVbecB6OLnw@mail.gmail.com>
2026-02-19 18:45 ` [syzbot] [media?] KASAN: slab-use-after-free Read in dvb_frontend_release (3) syzbot
[not found] <CAD9jT-dJThQYbDcOTQxp-QiZ-msAfteita6bJcexzU4gZio0GA@mail.gmail.com>
2026-02-19 19:12 ` syzbot
[not found] <CAD9jT-fYG58jR7baSm-1pFaJPO5Fp+sYv+s3YZUjTdUZST9syw@mail.gmail.com>
2026-02-20 7:18 ` syzbot
[not found] <DHULU6X2DUTJ.2L4854YRKI9U6@igalia.com>
2026-04-16 18:58 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=699a3047.050a0220.340abe.0d2b.GAE@google.com \
--to=syzbot+ae466a728017ec940b41@syzkaller.appspotmail.com \
--cc=hdanton@sina.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.