All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+7ea2f5e9dfd468201817@syzkaller.appspotmail.com>
To: dingyihan@uniontech.com, linux-kernel@vger.kernel.org,
	 syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [kernel?] INFO: task hung in restrict_one_thread_callback
Date: Mon, 23 Feb 2026 20:08:05 -0800	[thread overview]
Message-ID: <699d2425.050a0220.247d23.0391.GAE@google.com> (raw)
In-Reply-To: <F4E5EFD28BFB7AA6+108340fb-0592-4dd0-9f93-b7a2b760dc5d@uniontech.com>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

 team0: Port device team_slave_1 added
[   77.956359][ T5910] batman_adv: batadv0: Adding interface: batadv_slave_0
[   77.963600][ T5910] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   77.989888][ T5910] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   78.004522][ T5910] batman_adv: batadv0: Adding interface: batadv_slave_1
[   78.011605][ T5910] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   78.038002][ T5910] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   78.080982][ T5910] hsr_slave_0: entered promiscuous mode
[   78.087753][ T5910] hsr_slave_1: entered promiscuous mode
[   78.233618][ T5910] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   78.246125][ T5910] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   78.256883][ T5910] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   78.267118][ T5910] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   78.297441][ T5910] bridge0: port 2(bridge_slave_1) entered blocking state
[   78.304646][ T5910] bridge0: port 2(bridge_slave_1) entered forwarding state
[   78.312595][ T5910] bridge0: port 1(bridge_slave_0) entered blocking state
[   78.319734][ T5910] bridge0: port 1(bridge_slave_0) entered forwarding state
[   78.384207][ T5910] 8021q: adding VLAN 0 to HW filter on device bond0
[   78.404563][ T1004] bridge0: port 1(bridge_slave_0) entered disabled state
[   78.413314][ T1004] bridge0: port 2(bridge_slave_1) entered disabled state
[   78.428785][ T5910] 8021q: adding VLAN 0 to HW filter on device team0
[   78.443104][   T65] bridge0: port 1(bridge_slave_0) entered blocking state
[   78.450377][   T65] bridge0: port 1(bridge_slave_0) entered forwarding state
[   78.464952][   T12] bridge0: port 2(bridge_slave_1) entered blocking state
[   78.472313][   T12] bridge0: port 2(bridge_slave_1) entered forwarding state
[   78.645479][ T5910] 8021q: adding VLAN 0 to HW filter on device batadv0
[   78.696816][ T5910] veth0_vlan: entered promiscuous mode
[   78.709183][ T5910] veth1_vlan: entered promiscuous mode
[   78.745020][ T5910] veth0_macvtap: entered promiscuous mode
[   78.756102][ T5910] veth1_macvtap: entered promiscuous mode
[   78.779292][ T5910] batman_adv: batadv0: Interface activated: batadv_slave_0
[   78.795080][ T5910] batman_adv: batadv0: Interface activated: batadv_slave_1
[   78.812914][   T12] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   78.824397][   T12] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   78.840142][   T12] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   78.850096][   T12] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   78.975137][   T13] netdevsim netdevsim0 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   79.080924][   T13] netdevsim netdevsim0 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   79.141701][   T13] netdevsim netdevsim0 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   79.219381][   T13] netdevsim netdevsim0 netdevsim0 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
2026/02/24 04:06:47 executed programs: 0
[   79.336447][ T5143] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   79.347436][ T5143] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   79.355112][ T5143] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   79.363931][ T5143] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   79.372285][ T5143] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   79.509332][ T5936] chnl_net:caif_netlink_parms(): no params data found
[   79.580835][ T5936] bridge0: port 1(bridge_slave_0) entered blocking state
[   79.588539][ T5936] bridge0: port 1(bridge_slave_0) entered disabled state
[   79.596107][ T5936] bridge_slave_0: entered allmulticast mode
[   79.603587][ T5936] bridge_slave_0: entered promiscuous mode
[   79.613548][ T5936] bridge0: port 2(bridge_slave_1) entered blocking state
[   79.620886][ T5936] bridge0: port 2(bridge_slave_1) entered disabled state
[   79.628076][ T5936] bridge_slave_1: entered allmulticast mode
[   79.635811][ T5936] bridge_slave_1: entered promiscuous mode
[   79.673346][ T5936] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   79.687123][ T5936] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   79.721491][ T5936] team0: Port device team_slave_0 added
[   79.729676][ T5936] team0: Port device team_slave_1 added
[   79.759645][ T5936] batman_adv: batadv0: Adding interface: batadv_slave_0
[   79.766762][ T5936] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   79.793316][ T5936] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   79.806250][ T5936] batman_adv: batadv0: Adding interface: batadv_slave_1
[   79.816021][ T5936] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   79.842146][ T5936] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   79.891341][ T5936] hsr_slave_0: entered promiscuous mode
[   79.898314][ T5936] hsr_slave_1: entered promiscuous mode
[   79.906509][ T5936] debugfs: 'hsr0' already exists in 'hsr'
[   79.913302][ T5936] Cannot create hsr debugfs directory
[   81.411273][   T51] Bluetooth: hci0: command tx timeout
[   81.652909][   T42] cfg80211: failed to load regulatory.db
[   81.863344][   T13] bridge_slave_1: left allmulticast mode
[   81.869093][   T13] bridge_slave_1: left promiscuous mode
[   81.875947][   T13] bridge0: port 2(bridge_slave_1) entered disabled state
[   81.886804][   T13] bridge_slave_0: left allmulticast mode
[   81.895320][   T13] bridge_slave_0: left promiscuous mode
[   81.902418][   T13] bridge0: port 1(bridge_slave_0) entered disabled state
[   82.056915][   T13] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[   82.067689][   T13] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[   82.077661][   T13] bond0 (unregistering): Released all slaves
[   82.165586][   T13] hsr_slave_0: left promiscuous mode
[   82.171808][   T13] hsr_slave_1: left promiscuous mode
[   82.177965][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[   82.188972][   T13] batman_adv: batadv0: Removing interface: batadv_slave_0
[   82.201305][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[   82.208712][   T13] batman_adv: batadv0: Removing interface: batadv_slave_1
[   82.224168][   T13] veth1_macvtap: left promiscuous mode
[   82.229800][   T13] veth0_macvtap: left promiscuous mode
[   82.235949][   T13] veth1_vlan: left promiscuous mode
[   82.243307][   T13] veth0_vlan: left promiscuous mode
[   82.524939][   T13] team0 (unregistering): Port device team_slave_1 removed
[   82.542673][   T13] team0 (unregistering): Port device team_slave_0 removed
[   82.750272][    C1] list_del corruption, ffff88802a450890->next is NULL
[   82.757771][    C1] ------------[ cut here ]------------
[   82.763241][    C1] kernel BUG at lib/list_debug.c:53!
[   82.768569][    C1] Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
[   82.774843][    C1] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted syzkaller #0 PREEMPT(full) 
[   82.783771][    C1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
[   82.793910][    C1] RIP: 0010:__list_del_entry_valid_or_report+0xdf/0x190
[   82.800835][    C1] Code: 49 39 1f 0f 85 9e 00 00 00 b0 01 5b 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc cc 48 c7 c7 40 c1 29 8c 48 89 de e8 42 29 65 fc 90 <0f> 0b 48 c7 c7 a0 c1 29 8c 48 89 de e8 30 29 65 fc 90 0f 0b 4c 89
[   82.820420][    C1] RSP: 0018:ffffc90000a08d58 EFLAGS: 00010046
[   82.826480][    C1] RAX: 0000000000000033 RBX: ffff88802a450890 RCX: e58e7f17a2332a00
[   82.834525][    C1] RDX: 0000000000000100 RSI: 0000000000000102 RDI: 0000000000000000
[   82.842485][    C1] RBP: 0000000000000203 R08: ffffc90000a08ae7 R09: 1ffff9200014115c
[   82.850447][    C1] R10: dffffc0000000000 R11: fffff5200014115d R12: 1ffff1100548a112
[   82.858428][    C1] R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
[   82.866388][    C1] FS:  0000000000000000(0000) GS:ffff888125109000(0000) knlGS:0000000000000000
[   82.875311][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   82.881921][    C1] CR2: 00007f396a9de368 CR3: 000000000e74c000 CR4: 00000000003526f0
[   82.889883][    C1] Call Trace:
[   82.893147][    C1]  <IRQ>
[   82.896012][    C1]  dst_destroy+0x202/0x5a0
[   82.900422][    C1]  ? _raw_spin_unlock_irqrestore+0x30/0x80
[   82.906213][    C1]  ? rcu_core+0x751/0x1070
[   82.910617][    C1]  ? __pfx_dst_destroy_rcu+0x10/0x10
[   82.915891][    C1]  rcu_core+0x7cd/0x1070
[   82.920126][    C1]  ? __pfx_rcu_core+0x10/0x10
[   82.924791][    C1]  ? sched_balance_domains+0x13a/0x950
[   82.930242][    C1]  handle_softirqs+0x22a/0x870
[   82.935088][    C1]  ? __irq_exit_rcu+0x5f/0x150
[   82.939842][    C1]  __irq_exit_rcu+0x5f/0x150
[   82.944421][    C1]  irq_exit_rcu+0x9/0x30
[   82.948653][    C1]  sysvec_apic_timer_interrupt+0xa6/0xc0
[   82.954279][    C1]  </IRQ>
[   82.957194][    C1]  <TASK>
[   82.960106][    C1]  asm_sysvec_apic_timer_interrupt+0x1a/0x20
[   82.966079][    C1] RIP: 0010:pv_native_safe_halt+0xf/0x20
[   82.971695][    C1] Code: ee 73 02 c3 cc cc cc cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d 43 5d 10 00 fb f4 <e9> 7c ea 02 00 cc cc cc cc cc cc cc cc cc cc cc cc 90 90 90 90 90
[   82.991282][    C1] RSP: 0018:ffffc90000197e20 EFLAGS: 00000242
[   82.997334][    C1] RAX: 0000000000045cc1 RBX: ffffffff819ad30d RCX: 0000000080000001
[   83.005293][    C1] RDX: 0000000000000001 RSI: ffffffff8e013334 RDI: ffffffff8c29be00
[   83.013439][    C1] RBP: ffffc90000197f10 R08: ffff8880b853395b R09: 1ffff110170a672b
[   83.021511][    C1] R10: dffffc0000000000 R11: ffffed10170a672c R12: ffffffff9033b6b0
[   83.029470][    C1] R13: 1ffff11003b5e000 R14: 0000000000000001 R15: 0000000000000001
[   83.037433][    C1]  ? do_idle+0x1bd/0x500
[   83.041683][    C1]  default_idle+0x9/0x20
[   83.045914][    C1]  default_idle_call+0x72/0xb0
[   83.050753][    C1]  do_idle+0x1bd/0x500
[   83.054807][    C1]  ? _raw_spin_unlock_irqrestore+0x4c/0x80
[   83.060598][    C1]  ? __pfx_do_idle+0x10/0x10
[   83.065174][    C1]  ? _raw_spin_unlock_irqrestore+0x30/0x80
[   83.071057][    C1]  cpu_startup_entry+0x43/0x60
[   83.075812][    C1]  start_secondary+0x101/0x110
[   83.080648][    C1]  common_startup_64+0x13e/0x147
[   83.085576][    C1]  </TASK>
[   83.088575][    C1] Modules linked in:
[   83.092472][    C1] ---[ end trace 0000000000000000 ]---
[   83.097909][    C1] RIP: 0010:__list_del_entry_valid_or_report+0xdf/0x190
[   83.104866][    C1] Code: 49 39 1f 0f 85 9e 00 00 00 b0 01 5b 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc cc 48 c7 c7 40 c1 29 8c 48 89 de e8 42 29 65 fc 90 <0f> 0b 48 c7 c7 a0 c1 29 8c 48 89 de e8 30 29 65 fc 90 0f 0b 4c 89
[   83.124458][    C1] RSP: 0018:ffffc90000a08d58 EFLAGS: 00010046
[   83.130525][    C1] RAX: 0000000000000033 RBX: ffff88802a450890 RCX: e58e7f17a2332a00
[   83.138482][    C1] RDX: 0000000000000100 RSI: 0000000000000102 RDI: 0000000000000000
[   83.146435][    C1] RBP: 0000000000000203 R08: ffffc90000a08ae7 R09: 1ffff9200014115c
[   83.154477][    C1] R10: dffffc0000000000 R11: fffff5200014115d R12: 1ffff1100548a112
[   83.162435][    C1] R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
[   83.170390][    C1] FS:  0000000000000000(0000) GS:ffff888125109000(0000) knlGS:0000000000000000
[   83.179304][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   83.185872][    C1] CR2: 00007f396a9de368 CR3: 000000000e74c000 CR4: 00000000003526f0
[   83.193840][    C1] Kernel panic - not syncing: Fatal exception in interrupt
[   83.201135][    C1] Kernel Offset: disabled
[   83.205437][    C1] Rebooting in 86400 seconds..


syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build3187194119=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.24.4'
GOWORK=''
PKG_CONFIG='pkg-config'

git status (err=<nil>)
HEAD detached at 1e62d19825
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=1e62d1982527c3b4e18df04d61f2560fa1f434cc -X github.com/google/syzkaller/prog.gitRevisionDate=20260213-152336"  ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=1e62d1982527c3b4e18df04d61f2560fa1f434cc -X github.com/google/syzkaller/prog.gitRevisionDate=20260213-152336"  ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=1e62d1982527c3b4e18df04d61f2560fa1f434cc -X github.com/google/syzkaller/prog.gitRevisionDate=20260213-152336"  -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_amd64
g++ -o ./bin/linux_amd64/syz-executor executor/executor.cc \
	-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include   -DGOOS_linux=1 -DGOARCH_amd64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"1e62d1982527c3b4e18df04d61f2560fa1f434cc\"
/usr/bin/ld: /tmp/ccAQ1hzd.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x386): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=11c2155a580000


Tested on:

commit:         779cae95 Add linux-next specific files for 20260223
git tree:       linux-next
kernel config:  https://syzkaller.appspot.com/x/.config?x=ee920513e4deca5f
dashboard link: https://syzkaller.appspot.com/bug?extid=7ea2f5e9dfd468201817
compiler:       Debian clang version 21.1.8 (++20251221033036+2078da43e25a-1~exp1~20251221153213.50), Debian LLD 21.1.8
patch:          https://syzkaller.appspot.com/x/patch.diff?x=1782455a580000


       reply	other threads:[~2026-02-24  4:08 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <F4E5EFD28BFB7AA6+108340fb-0592-4dd0-9f93-b7a2b760dc5d@uniontech.com>
2026-02-24  4:08 ` syzbot [this message]
     [not found] <7F45E41D790CD8A4+f1dcffc7-5b69-432f-8ad7-e96a3ef66219@uniontech.com>
2026-02-24  5:07 ` [syzbot] [kernel?] INFO: task hung in restrict_one_thread_callback syzbot
     [not found] <F1E9B1BEBD8867CA+092eea18-94c7-4c65-a466-95cd3628a88c@uniontech.com>
2026-02-21  7:11 ` syzbot
2026-02-21  7:28   ` Ding Yihan
2026-02-21 12:00     ` Günther Noack
2026-02-21 13:19       ` Günther Noack
2026-02-23  9:42         ` Günther Noack
2026-02-23 11:29           ` Ding Yihan
2026-02-23 15:16             ` Günther Noack
2026-02-24  3:02               ` Ding Yihan
2026-02-24  3:03                 ` syzbot
2026-02-24 14:43     ` Günther Noack
2026-02-20 11:11 syzbot
2026-02-23 13:40 ` Frederic Weisbecker
2026-02-23 15:15   ` Günther Noack
2026-02-24  0:10 ` Hillf Danton
2026-02-24  3:05   ` syzbot
2026-02-24 10:00   ` Günther Noack
2026-02-25  5:10 ` Hillf Danton
2026-02-25 10:22 ` Hillf Danton
2026-02-25 12:21 ` Hillf Danton
2026-02-25 22:32 ` Hillf Danton
2026-02-26  2:19 ` Hillf Danton
2026-02-26 10:04 ` Hillf Danton
2026-02-27  0:03 ` Hillf Danton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=699d2425.050a0220.247d23.0391.GAE@google.com \
    --to=syzbot+7ea2f5e9dfd468201817@syzkaller.appspotmail.com \
    --cc=dingyihan@uniontech.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.