From: sanan.hasanou@gmail.com
To: hughd@google.com, baolin.wang@linux.alibaba.com,
akpm@linux-foundation.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Cc: syzkaller@googlegroups.com, contact@pgazz.com
Subject: WARNING in shmem_evict_inode
Date: Fri, 26 Jun 2026 14:28:00 -0700 (PDT) [thread overview]
Message-ID: <6a3eeee0.90b0dd93.20279d.5780@mx.google.com> (raw)
Good day, dear maintainers,
We found a bug using a modified version of syzkaller.
Kernel Branch: 7.0-rc1
Kernel Config: <https://drive.google.com/open?id=1XWXrj7ZUAS3GWmqvnny_U_mcxR6_AZCL>
Unfortunately, we don't have any reproducer for this bug yet.
Thank you!
Best regards,
Sanan Hasanov
------------[ cut here ]------------
inode->i_blocks
WARNING: mm/shmem.c:1430 at shmem_evict_inode+0x9d2/0xa30 mm/shmem.c:1430, CPU#0: syz.2.443/13891
Modules linked in:
CPU: 0 UID: 0 PID: 13891 Comm: syz.2.443 Not tainted 7.0.0-rc1 #1 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:shmem_evict_inode+0x9d2/0xa30 mm/shmem.c:1430
Code: 0e 48 3b 84 24 00 01 00 00 75 24 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 59 28 b8 ff e9 43 fe ff ff e8 4f 28 b8 ff 90 <0f> 0b 90 eb 9a e8 24 4f 16 09 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c
RSP: 0018:ffffc9000b8ff680 EFLAGS: 00010293
RAX: ffffffff82056871 RBX: 0000000000000008 RCX: ffff88801b71d700
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc9000b8ff7d0 R08: ffffffff8da5a1a3 R09: 1ffffffff1b4b434
R10: dffffc0000000000 R11: fffffbfff1b4b435 R12: ffff88804b899ae8
R13: ffff88804b8999f0 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88809b068000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30924220 CR3: 000000000d74a000 CR4: 00000000000006f0
Call Trace:
<TASK>
evict+0x5ed/0xad0 fs/inode.c:846
__dentry_kill+0x198/0x5d0 fs/dcache.c:670
finish_dput+0xc9/0x480 fs/dcache.c:879
__fput+0x688/0xa60 fs/file_table.c:477
task_work_run+0x1ce/0x250 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x694/0x22f0 kernel/exit.c:971
do_group_exit+0x21c/0x2d0 kernel/exit.c:1112
get_signal+0x1280/0x1330 kernel/signal.c:3034
arch_do_signal_or_restart+0x9a/0x640 arch/x86/kernel/signal.c:337
__exit_to_user_mode_loop kernel/entry/common.c:64 [inline]
exit_to_user_mode_loop+0x87/0x4e0 kernel/entry/common.c:98
__exit_to_user_mode_prepare include/linux/irq-entry-common.h:226 [inline]
syscall_exit_to_user_mode_prepare include/linux/irq-entry-common.h:256 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:325 [inline]
do_syscall_64+0x33b/0xfc0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fd265fa3b6d
Code: Unable to access opcode bytes at 0x7fd265fa3b43.
RSP: 002b:00007fd266d8a0d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fd266216188 RCX: 00007fd265fa3b6d
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fd266216188
RBP: 00007fd266216180 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fd266216218 R14: 000000000000006e R15: 00007ffcd73a64f0
</TASK>
<<<<<<<<<<<<<<< tail report >>>>>>>>>>>>>>>
Modules linked in:
CPU: 0 UID: 0 PID: 13891 Comm: syz.2.443 Not tainted 7.0.0-rc1 #1 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:shmem_evict_inode+0x9d2/0xa30
Code: 0e 48 3b 84 24 00 01 00 00 75 24 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 59 28 b8 ff e9 43 fe ff ff e8 4f 28 b8 ff 90 <0f> 0b 90 eb 9a e8 24 4f 16 09 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c
RSP: 0018:ffffc9000b8ff680 EFLAGS: 00010293
RAX: ffffffff82056871 RBX: 0000000000000008 RCX: ffff88801b71d700
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc9000b8ff7d0 R08: ffffffff8da5a1a3 R09: 1ffffffff1b4b434
R10: dffffc0000000000 R11: fffffbfff1b4b435 R12: ffff88804b899ae8
R13: ffff88804b8999f0 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88809b068000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b30924220 CR3: 000000000d74a000 CR4: 00000000000006f0
Call Trace:
<TASK>
evict+0x5ed/0xad0
__dentry_kill+0x198/0x5d0
finish_dput+0xc9/0x480
__fput+0x688/0xa60
task_work_run+0x1ce/0x250
do_exit+0x694/0x22f0
do_group_exit+0x21c/0x2d0
get_signal+0x1280/0x1330
arch_do_signal_or_restart+0x9a/0x640
exit_to_user_mode_loop+0x87/0x4e0
do_syscall_64+0x33b/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fd265fa3b6d
Code: Unable to access opcode bytes at 0x7fd265fa3b43.
RSP: 002b:00007fd266d8a0d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fd266216188 RCX: 00007fd265fa3b6d
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fd266216188
RBP: 00007fd266216180 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fd266216218 R14: 000000000000006e R15: 00007ffcd73a64f0
</TASK>
Kernel panic - not syncing: kernel: panic_on_warn set ...
CPU: 0 UID: 0 PID: 13891 Comm: syz.2.443 Not tainted 7.0.0-rc1 #1 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
vpanic+0x41f/0xa30
panic+0xb9/0xc0
__warn+0x317/0x500
__report_bug+0x28d/0x500
report_bug+0x16a/0x220
handle_bug+0x98/0x200
exc_invalid_op+0x1a/0x50
asm_exc_invalid_op+0x1a/0x20
RIP: 0010:shmem_evict_inode+0x9d2/0xa30
Code: 0e 48 3b 84 24 00 01 00 00 75 24 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 59 28 b8 ff e9 43 fe ff ff e8 4f 28 b8 ff 90 <0f> 0b 90 eb 9a e8 24 4f 16 09 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c
RSP: 0018:ffffc9000b8ff680 EFLAGS: 00010293
RAX: ffffffff82056871 RBX: 0000000000000008 RCX: ffff88801b71d700
RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000000
RBP: ffffc9000b8ff7d0 R08: ffffffff8da5a1a3 R09: 1ffffffff1b4b434
R10: dffffc0000000000 R11: fffffbfff1b4b435 R12: ffff88804b899ae8
R13: ffff88804b8999f0 R14: 0000000000000000 R15: 0000000000000000
evict+0x5ed/0xad0
__dentry_kill+0x198/0x5d0
finish_dput+0xc9/0x480
__fput+0x688/0xa60
task_work_run+0x1ce/0x250
do_exit+0x694/0x22f0
do_group_exit+0x21c/0x2d0
get_signal+0x1280/0x1330
arch_do_signal_or_restart+0x9a/0x640
exit_to_user_mode_loop+0x87/0x4e0
do_syscall_64+0x33b/0xfc0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fd265fa3b6d
Code: Unable to access opcode bytes at 0x7fd265fa3b43.
RSP: 002b:00007fd266d8a0d8 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00007fd266216188 RCX: 00007fd265fa3b6d
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00007fd266216188
RBP: 00007fd266216180 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fd266216218 R14: 000000000000006e R15: 00007ffcd73a64f0
</TASK>
Kernel Offset: disabled
Rebooting in 86400 seconds..
<<<<<<<<<<<<<<< tail report >>>>>>>>>>>>>>>
next reply other threads:[~2026-06-26 21:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-26 21:28 sanan.hasanou [this message]
-- strict thread matches above, loose matches on Subject: below --
2015-11-09 8:55 WARNING in shmem_evict_inode Dmitry Vyukov
2015-11-09 8:55 ` Dmitry Vyukov
2015-11-23 8:30 ` Dmitry Vyukov
2015-11-23 8:30 ` Dmitry Vyukov
2015-12-02 9:29 ` Hugh Dickins
2015-12-02 9:29 ` Hugh Dickins
2015-12-16 19:23 ` Holger Hoffstätte
2015-12-16 19:23 ` Holger Hoffstätte
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a3eeee0.90b0dd93.20279d.5780@mx.google.com \
--to=sanan.hasanou@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=contact@pgazz.com \
--cc=hughd@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=syzkaller@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.