This is automated email and please do not reply to this email! Dear submitter, Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series: PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1118320 ---Test result--- Test Summary: CheckPatch FAIL 3.84 seconds VerifyFixes PASS 0.22 seconds VerifySignedoff PASS 0.20 seconds GitLint FAIL 0.58 seconds SubjectPrefix FAIL 0.20 seconds BuildKernel PASS 26.40 seconds CheckAllWarning PASS 35.60 seconds CheckSparse PASS 28.00 seconds BuildKernel32 PASS 25.79 seconds CheckKernelLLVM SKIP 0.00 seconds TestRunnerSetup PASS 490.36 seconds TestRunner_l2cap-tester FAIL 57.02 seconds TestRunner_iso-tester PASS 78.67 seconds TestRunner_bnep-tester PASS 18.84 seconds TestRunner_mgmt-tester FAIL 204.92 seconds TestRunner_rfcomm-tester PASS 30.24 seconds TestRunner_sco-tester PASS 31.85 seconds TestRunner_ioctl-tester PASS 25.76 seconds TestRunner_mesh-tester FAIL 25.14 seconds TestRunner_smp-tester PASS 23.27 seconds TestRunner_userchan-tester PASS 20.56 seconds TestRunner_6lowpan-tester PASS 22.18 seconds IncrementalBuild PASS 25.31 seconds Details ############################## Test: CheckPatch - FAIL Desc: Run checkpatch.pl script Output: [RFC] gpiolib: introduce gpio_name() helper ERROR: code indent should use tabs where possible #296: FILE: drivers/mmc/host/atmel-mci.c:2258: +^I "slot[%u]: bus_width=%u, detect_pin=%s, "$ WARNING: quoted string split across lines #297: FILE: drivers/mmc/host/atmel-mci.c:2259: + "slot[%u]: bus_width=%u, detect_pin=%s, " + "detect_is_active_high=%s, wp_pin=%s\n", total: 1 errors, 1 warnings, 166 lines checked NOTE: For some of the reported defects, checkpatch may be able to mechanically convert to the typical style using --fix or --fix-inplace. NOTE: Whitespace errors detected. You may wish to use scripts/cleanpatch or scripts/cleanfile /github/workspace/src/patch/14651677.patch has style problems, please review. NOTE: Ignored message types: UNKNOWN_COMMIT_ID NOTE: If any of the errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. ############################## Test: GitLint - FAIL Desc: Run gitlint Output: [RFC] gpiolib: introduce gpio_name() helper 22: B3 Line contains hard tab characters (\t): "arch/arm/mach-pxa/pxa27x.c: reset_gpio = desc_to_gpio(gpiod);" 23: B3 Line contains hard tab characters (\t): "arch/arm/plat-orion/gpio.c: unsigned gpio = desc_to_gpio(desc);" 24: B1 Line exceeds max length (91>80): "drivers/gpio/gpio-nomadik.c: mode = nmk_prcm_gpiocr_get_mode(pctldev, desc_to_gpio(desc));" 24: B3 Line contains hard tab characters (\t): "drivers/gpio/gpio-nomadik.c: mode = nmk_prcm_gpiocr_get_mode(pctldev, desc_to_gpio(desc));" 25: B1 Line exceeds max length (85>80): "drivers/gpio/gpiolib-acpi-core.c: desc = gpio_to_desc(agpio->pin_table[pin_index]);" 25: B3 Line contains hard tab characters (\t): "drivers/gpio/gpiolib-acpi-core.c: desc = gpio_to_desc(agpio->pin_table[pin_index]);" 26: B1 Line exceeds max length (93>80): "drivers/gpio/gpiolib-cdev.c: hte_init_line_attr(hdesc, desc_to_gpio(line->desc), flags, NULL," 26: B3 Line contains hard tab characters (\t): "drivers/gpio/gpiolib-cdev.c: hte_init_line_attr(hdesc, desc_to_gpio(line->desc), flags, NULL," 27: B3 Line contains hard tab characters (\t): "drivers/gpio/gpiolib-sysfs.c: desc = gpio_to_desc(gpio);" 28: B3 Line contains hard tab characters (\t): "drivers/gpio/gpiolib-sysfs.c: desc_to_gpio(desc));" 29: B3 Line contains hard tab characters (\t): "drivers/gpio/gpiolib.c: trace_gpio_direction(desc_to_gpio(desc), 1, ret);" 30: B3 Line contains hard tab characters (\t): "drivers/input/misc/soc_button_array.c: *gpio_ret = desc_to_gpio(desc);" 31: B3 Line contains hard tab characters (\t): "drivers/pinctrl/core.c: gdev = gpiod_to_gpio_device(gpio_to_desc(gpio_num));" 32: B1 Line exceeds max length (122>80): "drivers/platform/x86/x86-android-tablets/core.c: * 2. Calling desc_to_gpio() to get an old style GPIO number for gpio-keys" 33: B3 Line contains hard tab characters (\t): "drivers/soc/fsl/qe/gpio.c: gpio_num = desc_to_gpio(gpiod);" ############################## Test: SubjectPrefix - FAIL Desc: Check subject contains "Bluetooth" prefix Output: "Bluetooth: " prefix is not specified in the subject ############################## Test: CheckKernelLLVM - SKIP Desc: Build kernel with LLVM + context analysis Output: Clang not found ############################## Test: TestRunner_l2cap-tester - FAIL Desc: Run l2cap-tester with test-runner Output: Total: 96, Passed: 95 (99.0%), Failed: 1, Not Run: 0 Failed Test Cases L2CAP BR/EDR Server - Set PHY 2M Failed 0.242 seconds ############################## Test: TestRunner_mgmt-tester - FAIL Desc: Run mgmt-tester with test-runner Output: Total: 494, Passed: 489 (99.0%), Failed: 1, Not Run: 4 Failed Test Cases Read Exp Feature - Success Failed 0.232 seconds ############################## Test: TestRunner_mesh-tester - FAIL Desc: Run mesh-tester with test-runner Output: Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0 Failed Test Cases Mesh - Send cancel - 1 Timed out 1.862 seconds Mesh - Send cancel - 2 Timed out 1.987 seconds https://github.com/bluez/bluetooth-next/pull/371 --- Regards, Linux Bluetooth