All of lore.kernel.org
 help / color / mirror / Atom feed
From: syzbot <syzbot+25031f01508bf55c62ca@syzkaller.appspotmail.com>
To: joshua.crofts1@gmail.com, linux-kernel@vger.kernel.org,
	 syzkaller-bugs@googlegroups.com
Subject: Re: [syzbot] [input?] [usb?] WARNING in cm109_input_ev/usb_submit_urb (2)
Date: Mon, 27 Jul 2026 12:47:02 -0700	[thread overview]
Message-ID: <6a67b5b6.a2ea2cc8.fbad6.0054.GAE@google.com> (raw)
In-Reply-To: <20260727204430.583f59db@systembl0wer>

Hello,

syzbot tried to test the proposed patch but the build/boot failed:

 PCI/PCI transfers
[    5.444186][    T1] PCI: CLS 0 bytes, default 64
[    5.444816][    T1] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    5.444832][    T1] software IO TLB: mapped [mem 0x00000000b4600000-0x00000000b8600000] (64MB)
[    5.456557][    T1] ACPI: bus type thunderbolt registered
[    5.469792][    T1] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer
[    5.493158][   T69] kworker/u8:4 (69) used greatest stack depth: 28264 bytes left
[    5.495766][   T70] kworker/u8:1 (70) used greatest stack depth: 27600 bytes left
[    5.529581][    T1] kvm_amd: CPU 1 isn't AMD or Hygon
[    5.529617][    T1] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fb63109b96, max_idle_ns: 440795265316 ns
[    5.530308][    T1] clocksource: Switched to clocksource tsc
[    5.548832][   T73] kworker/u8:2 (73) used greatest stack depth: 27048 bytes left
[    5.627675][    T1] Initialise system trusted keyrings
[    5.631386][    T1] workingset: timestamp_bits=40 (anon: 35) max_order=21 bucket_order=0 (anon: 0)
[    5.652577][    T1] DLM installed
[    5.663401][    T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.683324][    T1] NFS: Registering the id_resolver key type
[    5.683512][    T1] Key type id_resolver registered
[    5.683527][    T1] Key type id_legacy registered
[    5.683912][    T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    5.684146][    T1] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    5.705015][    T1] smbdirect: subsystem loading...
[    5.722695][    T1] smbdirect: subsystem loaded
[    5.755508][    T1] Key type cifs.spnego registered
[    5.755795][    T1] Key type cifs.idmap registered
[    5.762170][    T1] ntfs3: Enabled Linux POSIX ACLs support
[    5.762181][    T1] ntfs3: Read-only LZX/Xpress compression included
[    5.762554][    T1] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    5.785507][    T1] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    5.785733][    T1] QNX4 filesystem 0.2.3 registered.
[    5.785852][    T1] qnx6: QNX6 filesystem 1.0.0 registered.
[    5.787232][    T1] fuse: init (API version 7.45)
[    5.794544][    T1] orangefs_debugfs_init: called with debug mask: :none: :0:
[    5.808206][    T1] orangefs_init: module version upstream loaded
[    5.809264][    T1] JFS: nTxBlock = 8192, nTxLock = 65536
[    5.832413][    T1] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[    5.849633][    T1] 9p: Installing v9fs 9p2000 file system support
[    5.851906][    T1] NILFS version 2 loaded
[    5.851917][    T1] befs: version: 0.9.3
[    5.854601][    T1] ocfs2: Registered cluster interface o2cb
[    5.861599][    T1] ocfs2: Registered cluster interface user
[    5.868104][    T1] OCFS2 User DLM kernel interface loaded
[    5.924667][    T1] gfs2: GFS2 installed
[    5.950604][    T1] ceph: loaded (mds proto 32)
[    5.970916][    T1] NET: Registered PF_ALG protocol family
[    5.971417][    T1] async_tx: api initialized (async)
[    5.971488][    T1] Key type asymmetric registered
[    5.971574][    T1] Asymmetric key parser 'x509' registered
[    5.971592][    T1] Asymmetric key parser 'pkcs8' registered
[    5.971608][    T1] Key type pkcs7_test registered
[    5.973411][    T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 239)
[    5.980507][    T1] io scheduler mq-deadline registered
[    5.980585][    T1] io scheduler kyber registered
[    5.982508][    T1] io scheduler bfq registered
[    6.001365][    T1] raid6: skipped pq benchmark and selected avx2x4
[    6.039935][    T1] input: Power Button as /devices/platform/LNXPWRBN:00/input/input0
[    6.045459][    T1] ACPI: button: Power Button [PWRF]
[    6.058697][    T1] input: Sleep Button as /devices/platform/LNXSLPBN:00/input/input1
[    6.063260][    T1] ACPI: button: Sleep Button [SLPF]
[    6.106537][    T1] ioatdma: Intel(R) QuickData Technology Driver 5.00
[    6.163872][   T10] ACPI: \_SB_.LNKC: Enabled at IRQ 11
[    6.164135][   T10] virtio-pci 0000:00:03.0: virtio_pci: leaving for legacy driver
[    6.214960][   T10] ACPI: \_SB_.LNKD: Enabled at IRQ 10
[    6.218325][   T10] virtio-pci 0000:00:04.0: virtio_pci: leaving for legacy driver
[    6.264078][   T10] ACPI: \_SB_.LNKB: Enabled at IRQ 10
[    6.264234][   T10] virtio-pci 0000:00:06.0: virtio_pci: leaving for legacy driver
[    6.301576][   T10] virtio-pci 0000:00:07.0: virtio_pci: leaving for legacy driver
[    6.337562][  T211] kworker/u8:6 (211) used greatest stack depth: 26120 bytes left
[    7.432947][    T1] N_HDLC line discipline registered with maxframe=4096
[    7.439409][    T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    7.458549][    T1] 00:02: ttyS0 I/O:0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    7.491690][    T1] 00:03: ttyS1 I/O:0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    7.519868][    T1] 00:04: ttyS2 I/O:0x3e8 (irq = 6, base_baud = 115200) is a 16550A
[    7.546408][    T1] 00:05: ttyS3 I/O:0x2e8 (irq = 7, base_baud = 115200) is a 16550A
[    7.596237][    T1] Non-volatile memory driver v1.3
[    7.652884][    T1] usbcore: registered new interface driver xillyusb
[    7.670115][    T1] ACPI: bus type drm_connector registered
[    7.685171][    T1] [drm] Initialized vgem 1.0.0 for vgem on minor 0
[    7.694858][    T1] ------------[ cut here ]------------
[    7.694873][    T1] [PLANE:35:plane-0] pixel format with alpha exposed but blend mode not setup
[    7.694896][    T1] WARNING: drivers/gpu/drm/drm_mode_config.c:873 at drm_mode_config_validate+0x1c6d/0x1e60, CPU#1: swapper/0/1
[    7.694965][    T1] Modules linked in:
[    7.695014][    T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)} 
[    7.695118][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/16/2026
[    7.695141][    T1] RIP: 0010:drm_mode_config_validate+0x1cae/0x1e60
[    7.695170][    T1] Code: 0f 85 ae 00 00 00 4d 8d 77 10 8b 6d 00 4c 89 f0 48 c1 e8 03 80 3c 18 00 74 08 4c 89 f7 e8 fa 9f ac fc 49 8b 16 4c 89 ef 89 ee <67> 48 0f b9 3a eb 05 e8 06 d0 3f fc 49 bd 00 00 00 00 00 fc ff df
[    7.695192][    T1] RSP: 0000:ffffc90000067810 EFLAGS: 00010246
[    7.695211][    T1] RAX: 1ffff11004be7c08 RBX: dffffc0000000000 RCX: ffff88801c6f5dc0
[    7.695228][    T1] RDX: ffff888026454c40 RSI: 0000000000000023 RDI: ffffffff8fdc7790
[    7.695244][    T1] RBP: 0000000000000023 R08: 0000000000000000 R09: 0000000000000000
[    7.695258][    T1] R10: dffffc0000000000 R11: fffffbfff1fa25f0 R12: dffffc0000000000
[    7.695275][    T1] R13: ffffffff8fdc7790 R14: ffff888025f3e040 R15: ffff888025f3e030
[    7.695291][    T1] FS:  0000000000000000(0000) GS:ffff888125add000(0000) knlGS:0000000000000000
[    7.695309][    T1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.695324][    T1] CR2: 0000000000000000 CR3: 000000000e1b0000 CR4: 00000000003526f0
[    7.695343][    T1] Call Trace:
[    7.695352][    T1]  <TASK>
[    7.695376][    T1]  ? debugfs_create_file_full+0x3f/0x60
[    7.695418][    T1]  drm_dev_register+0x7f/0xd80
[    7.695448][    T1]  vkms_create+0x40d/0x4f0
[    7.695480][    T1]  ? __pfx_vkms_init+0x10/0x10
[    7.695518][    T1]  vkms_init+0x57/0x80
[    7.695551][    T1]  do_one_initcall+0x250/0x870
[    7.695579][    T1]  ? __pfx_vkms_init+0x10/0x10
[    7.695611][    T1]  ? __pfx_do_one_initcall+0x10/0x10
[    7.695647][    T1]  ? __pfx___schedule+0x10/0x10
[    7.695687][    T1]  ? irqentry_exit+0x218/0x8f0
[    7.695718][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    7.695741][    T1]  ? irqentry_exit+0x218/0x8f0
[    7.695764][    T1]  ? trace_irq_disable+0x3b/0x140
[    7.695805][    T1]  ? strlen+0x5c/0x70
[    7.695830][    T1]  ? next_arg+0x4a0/0x5e0
[    7.695857][    T1]  ? parameq+0x14d/0x170
[    7.695894][    T1]  ? parse_args+0x9c3/0xad0
[    7.695943][    T1]  ? trace_kmalloc+0x2a/0xf0
[    7.695978][    T1]  ? rcu_is_watching+0x15/0xb0
[    7.696008][    T1]  do_initcall_level+0x10a/0x1a0
[    7.696035][    T1]  ? kernel_init+0x22/0x1d0
[    7.696063][    T1]  do_initcalls+0x59/0xa0
[    7.696090][    T1]  kernel_init_freeable+0x29d/0x3e0
[    7.696115][    T1]  ? __pfx_kernel_init+0x10/0x10
[    7.696147][    T1]  kernel_init+0x22/0x1d0
[    7.696174][    T1]  ? __pfx_kernel_init+0x10/0x10
[    7.696202][    T1]  ret_from_fork+0x514/0xb70
[    7.696235][    T1]  ? __pfx_ret_from_fork+0x10/0x10
[    7.696264][    T1]  ? __switch_to+0xc89/0x1420
[    7.696293][    T1]  ? __pfx_kernel_init+0x10/0x10
[    7.696325][    T1]  ret_from_fork_asm+0x1a/0x30
[    7.696372][    T1]  </TASK>
[    7.696388][    T1] Kernel panic - not syncing: kernel: panic_on_warn set ...
[    7.696404][    T1] CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT_{RT,(full)} 
[    7.696428][    T1] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/16/2026
[    7.696440][    T1] Call Trace:
[    7.696448][    T1]  <TASK>
[    7.696457][    T1]  vpanic+0x56c/0xa60
[    7.696480][    T1]  ? __pfx__printk+0x10/0x10
[    7.696506][    T1]  ? __pfx_vpanic+0x10/0x10
[    7.696529][    T1]  ? is_bpf_text_address+0x292/0x2b0
[    7.696554][    T1]  ? is_bpf_text_address+0x26/0x2b0
[    7.696588][    T1]  panic+0xc5/0xd0
[    7.696610][    T1]  ? __pfx_panic+0x10/0x10
[    7.696640][    T1]  ? ret_from_fork_asm+0x1a/0x30
[    7.696675][    T1]  __warn+0x315/0x4c0
[    7.696695][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    7.696732][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    7.696758][    T1]  __report_bug+0x276/0x570
[    7.696785][    T1]  ? drm_mode_config_validate+0x1c6d/0x1e60
[    7.696814][    T1]  ? __pfx___report_bug+0x10/0x10
[    7.696845][    T1]  ? _raw_spin_unlock_irqrestore+0x30/0x80
[    7.696871][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    7.696896][    T1]  ? rt_mutex_slowunlock+0x4ee/0xa20
[    7.696930][    T1]  report_bug_entry+0x19a/0x290
[    7.696956][    T1]  ? drm_mode_config_validate+0x1cae/0x1e60
[    7.696980][    T1]  ? drm_mode_config_validate+0x1cb3/0x1e60
[    7.697005][    T1]  handle_bug+0xce/0x200
[    7.697153][    T1]  exc_invalid_op+0x1a/0x50
[    7.697186][    T1]  asm_exc_invalid_op+0x1a/0x20
[    7.697209][    T1] RIP: 0010:drm_mode_config_validate+0x1cae/0x1e60
[    7.697237][    T1] Code: 0f 85 ae 00 00 00 4d 8d 77 10 8b 6d 00 4c 89 f0 48 c1 e8 03 80 3c 18 00 74 08 4c 89 f7 e8 fa 9f ac fc 49 8b 16 4c 89 ef 89 ee <67> 48 0f b9 3a eb 05 e8 06 d0 3f fc 49 bd 00 00 00 00 00 fc ff df
[    7.697256][    T1] RSP: 0000:ffffc90000067810 EFLAGS: 00010246
[    7.697275][    T1] RAX: 1ffff11004be7c08 RBX: dffffc0000000000 RCX: ffff88801c6f5dc0
[    7.697292][    T1] RDX: ffff888026454c40 RSI: 0000000000000023 RDI: ffffffff8fdc7790
[    7.697307][    T1] RBP: 0000000000000023 R08: 0000000000000000 R09: 0000000000000000
[    7.697320][    T1] R10: dffffc0000000000 R11: fffffbfff1fa25f0 R12: dffffc0000000000
[    7.697336][    T1] R13: ffffffff8fdc7790 R14: ffff888025f3e040 R15: ffff888025f3e030
[    7.697378][    T1]  ? debugfs_create_file_full+0x3f/0x60
[    7.697418][    T1]  drm_dev_register+0x7f/0xd80
[    7.697447][    T1]  vkms_create+0x40d/0x4f0
[    7.697478][    T1]  ? __pfx_vkms_init+0x10/0x10
[    7.697509][    T1]  vkms_init+0x57/0x80
[    7.697542][    T1]  do_one_initcall+0x250/0x870
[    7.697570][    T1]  ? __pfx_vkms_init+0x10/0x10
[    7.697614][    T1]  ? __pfx_do_one_initcall+0x10/0x10
[    7.697650][    T1]  ? __pfx___schedule+0x10/0x10
[    7.697687][    T1]  ? irqentry_exit+0x218/0x8f0
[    7.697710][    T1]  ? lockdep_hardirqs_on+0x7a/0x110
[    7.697735][    T1]  ? irqentry_exit+0x218/0x8f0
[    7.697757][    T1]  ? trace_irq_disable+0x3b/0x140
[    7.697799][    T1]  ? strlen+0x5c/0x70
[    7.697824][    T1]  ? next_arg+0x4a0/0x5e0
[    7.697852][    T1]  ? parameq+0x14d/0x170
[    7.697888][    T1]  ? parse_args+0x9c3/0xad0
[    7.697937][    T1]  ? trace_kmalloc+0x2a/0xf0
[    7.697972][    T1]  ? rcu_is_watching+0x15/0xb0
[    7.698003][    T1]  do_initcall_level+0x10a/0x1a0
[    7.698032][    T1]  ? kernel_init+0x22/0x1d0
[    7.698063][    T1]  do_initcalls+0x59/0xa0
[    7.698089][    T1]  kernel_init_freeable+0x29d/0x3e0
[    7.698115][    T1]  ? __pfx_kernel_init+0x10/0x10
[    7.698146][    T1]  kernel_init+0x22/0x1d0
[    7.698174][    T1]  ? __pfx_kernel_init+0x10/0x10
[    7.698203][    T1]  ret_from_fork+0x514/0xb70
[    7.698237][    T1]  ? __pfx_ret_from_fork+0x10/0x10
[    7.698268][    T1]  ? __switch_to+0xc89/0x1420
[    7.698304][    T1]  ? __pfx_kernel_init+0x10/0x10
[    7.698337][    T1]  ret_from_fork_asm+0x1a/0x30
[    7.698384][    T1]  </TASK>
[    7.699007][    T1] Kernel Offset: disabled


syzkaller build log:
go env (err=<nil>)
AR='ar'
CC='gcc'
CGO_CFLAGS='-O2 -g'
CGO_CPPFLAGS=''
CGO_CXXFLAGS='-O2 -g'
CGO_ENABLED='1'
CGO_FFLAGS='-O2 -g'
CGO_LDFLAGS='-O2 -g'
CXX='g++'
GCCGO='gccgo'
GO111MODULE='auto'
GOAMD64='v1'
GOARCH='amd64'
GOAUTH='netrc'
GOBIN=''
GOCACHE='/syzkaller/.cache/go-build'
GOCACHEPROG=''
GODEBUG=''
GOENV='/syzkaller/.config/go/env'
GOEXE=''
GOEXPERIMENT=''
GOFIPS140='off'
GOFLAGS=''
GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0 -ffile-prefix-map=/tmp/go-build18079588=/tmp/go-build -gno-record-gcc-switches'
GOHOSTARCH='amd64'
GOHOSTOS='linux'
GOINSECURE=''
GOMOD='/syzkaller/jobs-2/linux/gopath/src/github.com/google/syzkaller/go.mod'
GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
GONOPROXY=''
GONOSUMDB=''
GOOS='linux'
GOPATH='/syzkaller/jobs-2/linux/gopath'
GOPRIVATE=''
GOPROXY='https://proxy.golang.org,direct'
GOROOT='/usr/local/go'
GOSUMDB='sum.golang.org'
GOTELEMETRY='local'
GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
GOTMPDIR=''
GOTOOLCHAIN='auto'
GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
GOVCS=''
GOVERSION='go1.26.0'
GOWORK=''
PKG_CONFIG='pkg-config'

git status (err=<nil>)
HEAD detached at 7c5de9c304
nothing to commit, working tree clean


tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
go list -f '{{.Stale}}' -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=7c5de9c304dd32fc045989c69d2821397d56d718 -X github.com/google/syzkaller/prog.gitRevisionDate=20260721-090218"  ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=7c5de9c304dd32fc045989c69d2821397d56d718 -X github.com/google/syzkaller/prog.gitRevisionDate=20260721-090218"  ./sys/syz-sysgen
make .descriptions
tput: No value for $TERM and no -T specified
tput: No value for $TERM and no -T specified
Makefile:31: run command via tools/syz-env for best compatibility, see:
Makefile:32: https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
bin/syz-sysgen
touch .descriptions
GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X github.com/google/syzkaller/prog.GitRevision=7c5de9c304dd32fc045989c69d2821397d56d718 -X github.com/google/syzkaller/prog.gitRevisionDate=20260721-090218"  -o ./bin/linux_amd64/syz-execprog github.com/google/syzkaller/tools/syz-execprog
mkdir -p ./bin/linux_amd64
g++ -o ./bin/linux_amd64/syz-executor executor/executor.cc \
	-m64 -O2 -pthread -Wall -Werror -Wparentheses -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable -Wno-unused-command-line-argument -static-pie -std=c++17 -I. -Iexecutor/_include   -DGOOS_linux=1 -DGOARCH_amd64=1 \
	-DHOSTGOOS_linux=1 -DGIT_REVISION=\"7c5de9c304dd32fc045989c69d2821397d56d718\"
/usr/bin/ld: /tmp/cc8B3TAg.o: in function `Connection::Connect(char const*, char const*)':
executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x386): warning: Using 'gethostbyname' in statically linked applications requires at runtime the shared libraries from the glibc version used for linking
./tools/check-syzos.sh 2>/dev/null


Error text is too large and was truncated, full error text is at:
https://syzkaller.appspot.com/x/error.txt?x=13e7f2ea580000


Tested on:

commit:         0d33d21e Add linux-next specific files for 20260727
git tree:       linux-next
kernel config:  https://syzkaller.appspot.com/x/.config?x=830a7c02f0fee86b
dashboard link: https://syzkaller.appspot.com/bug?extid=25031f01508bf55c62ca
compiler:       Debian clang version 22.1.8 (++20260613092233+e80beda6e255-1~exp1~20260613092250.77), Debian LLD 22.1.8
patch:          https://syzkaller.appspot.com/x/patch.diff?x=140a67b1580000


       reply	other threads:[~2026-07-27 19:47 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20260727204430.583f59db@systembl0wer>
2026-07-27 19:47 ` syzbot [this message]
2026-07-25 19:56 [syzbot] [input?] [usb?] WARNING in cm109_input_ev/usb_submit_urb (2) syzbot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=6a67b5b6.a2ea2cc8.fbad6.0054.GAE@google.com \
    --to=syzbot+25031f01508bf55c62ca@syzkaller.appspotmail.com \
    --cc=joshua.crofts1@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=syzkaller-bugs@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.