From: syzbot <syzbot+87188222c77c0dbbdb4d@syzkaller.appspotmail.com>
To: linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com
Subject: Forwarded: Re: [PATCH] usb: core: fix GPF on disconnect when interface claimed before registration
Date: Wed, 02 Sep 2026 23:46:31 -0700 [thread overview]
Message-ID: <6a9917c7.9266084e.bf0d7.00af.GAE@google.com> (raw)
In-Reply-To: <6a85e576.f7a79266.2f965f.003f.GAE@google.com>
For archival purposes, forwarding an incoming command email to
linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com.
***
Subject: Re: [PATCH] usb: core: fix GPF on disconnect when interface claimed before registration
Author: khiemtranzo532001@gmail.com
#syz test: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
master
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index f63004417..59e74872b 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -562,7 +562,6 @@ int usb_driver_claim_interface(struct usb_driver
*driver,
if (!iface->authorized)
return -ENODEV;
- dev->driver = &driver->driver;
usb_set_intfdata(iface, data);
iface->needs_binding = 0;
@@ -580,11 +579,19 @@ int usb_driver_claim_interface(struct usb_driver
*driver,
else
pm_runtime_set_active(dev);
- /* if interface was already added, bind now; else let
- * the future device_add() bind it, bypassing probe()
- */
- if (device_is_registered(dev))
+ if (device_is_registered(dev)) {
+ dev->driver = &driver->driver;
retval = device_bind_driver(dev);
+ } else {
+ /*
+ * Interface not yet registered: record the claim without
+ * setting dev->driver. usb_set_configuration() will call
+ * device_bind_driver() explicitly after device_add(), which
+ * skips ->probe() and attaches knode_driver so teardown is
safe.
+ */
+ iface->claimed = 1;
+ iface->claimed_driver = driver;
+ }
if (retval) {
dev->driver = NULL;
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 75e2bfd74..73c630750 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -2269,8 +2269,23 @@ int usb_set_configuration(struct usb_device *dev,
int configuration)
if (ret != 0) {
dev_err(&dev->dev, "device_add(%s) --> %d\n",
dev_name(&intf->dev), ret);
+ intf->claimed = 0;
+ intf->claimed_driver = NULL;
continue;
}
+ if (intf->claimed) {
+ intf->dev.driver = &intf->claimed_driver->driver;
+ ret = device_bind_driver(&intf->dev);
+ if (ret) {
+ dev_err(&dev->dev,
+ "device_bind_driver(%s) --> %d\n",
+ dev_name(&intf->dev), ret);
+ intf->dev.driver = NULL;
+ intf->condition = USB_INTERFACE_UNBOUND;
+ }
+ intf->claimed = 0;
+ intf->claimed_driver = NULL;
+ }
create_intf_ep_devs(intf);
}
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 1da4ad161..0ec743e76 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -266,6 +266,8 @@ struct usb_interface {
unsigned needs_binding:1; /* needs delayed unbind/rebind */
unsigned resetting_device:1; /* true: bandwidth alloc after
reset */
unsigned authorized:1; /* used for interface authorization
*/
+ unsigned claimed:1; /* driver claimed before
device_add() */
+ struct usb_driver *claimed_driver; /* driver for deferred bind
*/
enum usb_wireless_status wireless_status;
struct work_struct wireless_status_work;
--
2.34.1
On Thu, Sep 3, 2026 at 1:37 PM Akihiko Kai <khiemtranzo532001@gmail.com>
wrote:
> #syz test
>
> usb_driver_claim_interface() sets dev->driver unconditionally before
> checking device_is_registered(dev). When called from usb_audio_probe()
> during configuration, the interface device has not been added to the
> driver core yet (device_add() is called later in usb_set_configuration()).
>
> As a result, knode_driver is never attached to the driver's klist, but
> dev->driver is set. On subsequent disconnect, bus_remove_device() calls
> __device_release_driver(), which calls klist_remove(&dev->p->knode_driver)
> unconditionally on the uninitialized node, causing a general protection
> fault:
>
> BUG: kernel NULL pointer dereference
> RIP: klist_remove+0x...
> Call Trace:
> __device_release_driver
> bus_remove_device
> device_del
> usb_disable_device
> usb_disconnect
>
> Fix this by deferring the assignment of dev->driver for interfaces that
> are not yet registered. Instead, record the claim via two new fields in
> struct usb_interface: a claimed bitflag and a claimed_driver pointer.
> After device_add() completes in usb_set_configuration(), call
> device_bind_driver() explicitly for claimed interfaces.
>
> device_bind_driver() skips ->probe() (which is exactly what usb_audio
> needs — PCM and MIDI devices are created before bind), but it does
> attach knode_driver to the driver's klist, making teardown safe.
>
> The else-if branch in dd.c that handles dev->driver already set at
> device_add() time (used by w1, usb_port, ccwgroup, pata_parport, and
> others) is intentionally left untouched.
>
> Reported-by: syzbot+87188222c77c0dbbdb4d@syzkaller.appspotmail.com
> Closes: https://syzkaller.appspot.com/bug?extid=87188222c77c0dbbdb4d
> Signed-off-by: Nguyen Quang Le Kien <khiemtranzo532001@gmail.com>
> ---
> drivers/usb/core/driver.c | 19 ++++++++++++++-----
> drivers/usb/core/message.c | 15 +++++++++++++++
> include/linux/usb.h | 2 ++
> 3 files changed, 31 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
> index f63004417..59e74872b 100644
> --- a/drivers/usb/core/driver.c
> +++ b/drivers/usb/core/driver.c
> @@ -562,7 +562,6 @@ int usb_driver_claim_interface(struct usb_driver
> *driver,
> if (!iface->authorized)
> return -ENODEV;
>
> - dev->driver = &driver->driver;
> usb_set_intfdata(iface, data);
> iface->needs_binding = 0;
>
> @@ -580,11 +579,19 @@ int usb_driver_claim_interface(struct usb_driver
> *driver,
> else
> pm_runtime_set_active(dev);
>
> - /* if interface was already added, bind now; else let
> - * the future device_add() bind it, bypassing probe()
> - */
> - if (device_is_registered(dev))
> + if (device_is_registered(dev)) {
> + dev->driver = &driver->driver;
> retval = device_bind_driver(dev);
> + } else {
> + /*
> + * Interface not yet registered: record the claim without
> + * setting dev->driver. usb_set_configuration() will call
> + * device_bind_driver() explicitly after device_add(),
> which
> + * skips ->probe() and attaches knode_driver so teardown
> is safe.
> + */
> + iface->claimed = 1;
> + iface->claimed_driver = driver;
> + }
>
> if (retval) {
> dev->driver = NULL;
> diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
> index 75e2bfd74..73c630750 100644
> --- a/drivers/usb/core/message.c
> +++ b/drivers/usb/core/message.c
> @@ -2269,8 +2269,23 @@ int usb_set_configuration(struct usb_device *dev,
> int configuration)
> if (ret != 0) {
> dev_err(&dev->dev, "device_add(%s) --> %d\n",
> dev_name(&intf->dev), ret);
> + intf->claimed = 0;
> + intf->claimed_driver = NULL;
> continue;
> }
> + if (intf->claimed) {
> + intf->dev.driver = &intf->claimed_driver->driver;
> + ret = device_bind_driver(&intf->dev);
> + if (ret) {
> + dev_err(&dev->dev,
> + "device_bind_driver(%s) --> %d\n",
> + dev_name(&intf->dev), ret);
> + intf->dev.driver = NULL;
> + intf->condition = USB_INTERFACE_UNBOUND;
> + }
> + intf->claimed = 0;
> + intf->claimed_driver = NULL;
> + }
> create_intf_ep_devs(intf);
> }
>
> diff --git a/include/linux/usb.h b/include/linux/usb.h
> index 1da4ad161..0ec743e76 100644
> --- a/include/linux/usb.h
> +++ b/include/linux/usb.h
> @@ -266,6 +266,8 @@ struct usb_interface {
> unsigned needs_binding:1; /* needs delayed unbind/rebind */
> unsigned resetting_device:1; /* true: bandwidth alloc after
> reset */
> unsigned authorized:1; /* used for interface
> authorization */
> + unsigned claimed:1; /* driver claimed before
> device_add() */
> + struct usb_driver *claimed_driver; /* driver for deferred
> bind */
> enum usb_wireless_status wireless_status;
> struct work_struct wireless_status_work;
> --
> 2.34.1
>
> On Thu, Sep 3, 2026 at 1:30 PM Akihiko Kai <khiemtranzo532001@gmail.com>
> wrote:
>
>> usb_driver_claim_interface() sets dev->driver unconditionally before
>> checking device_is_registered(dev). When called from usb_audio_probe()
>> during configuration, the interface device has not been added to the
>> driver core yet (device_add() is called later in usb_set_configuration()).
>>
>> As a result, knode_driver is never attached to the driver's klist, but
>> dev->driver is set. On subsequent disconnect, bus_remove_device() calls
>> __device_release_driver(), which calls klist_remove(&dev->p->knode_driver)
>> unconditionally on the uninitialized node, causing a general protection
>> fault:
>>
>> BUG: kernel NULL pointer dereference
>> RIP: klist_remove+0x...
>> Call Trace:
>> __device_release_driver
>> bus_remove_device
>> device_del
>> usb_disable_device
>> usb_disconnect
>>
>> Fix this by deferring the assignment of dev->driver for interfaces that
>> are not yet registered. Instead, record the claim via two new fields in
>> struct usb_interface: a claimed bitflag and a claimed_driver pointer.
>> After device_add() completes in usb_set_configuration(), call
>> device_bind_driver() explicitly for claimed interfaces.
>>
>> device_bind_driver() skips ->probe() (which is exactly what usb_audio
>> needs — PCM and MIDI devices are created before bind), but it does
>> attach knode_driver to the driver's klist, making teardown safe.
>>
>> The else-if branch in dd.c that handles dev->driver already set at
>> device_add() time (used by w1, usb_port, ccwgroup, pata_parport, and
>> others) is intentionally left untouched.
>>
>> Reported-by: syzbot+87188222c77c0dbbdb4d@syzkaller.appspotmail.com
>> Closes: https://syzkaller.appspot.com/bug?extid=87188222c77c0dbbdb4d
>> Signed-off-by: Nguyen Quang Le Kien <khiemtranzo532001@gmail.com>
>> ---
>> drivers/usb/core/driver.c | 19 ++++++++++++++-----
>> drivers/usb/core/message.c | 15 +++++++++++++++
>> include/linux/usb.h | 2 ++
>> 3 files changed, 31 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
>> index f63004417..59e74872b 100644
>> --- a/drivers/usb/core/driver.c
>> +++ b/drivers/usb/core/driver.c
>> @@ -562,7 +562,6 @@ int usb_driver_claim_interface(struct usb_driver
>> *driver,
>> if (!iface->authorized)
>> return -ENODEV;
>>
>> - dev->driver = &driver->driver;
>> usb_set_intfdata(iface, data);
>> iface->needs_binding = 0;
>>
>> @@ -580,11 +579,19 @@ int usb_driver_claim_interface(struct usb_driver
>> *driver,
>> else
>> pm_runtime_set_active(dev);
>>
>> - /* if interface was already added, bind now; else let
>> - * the future device_add() bind it, bypassing probe()
>> - */
>> - if (device_is_registered(dev))
>> + if (device_is_registered(dev)) {
>> + dev->driver = &driver->driver;
>> retval = device_bind_driver(dev);
>> + } else {
>> + /*
>> + * Interface not yet registered: record the claim without
>> + * setting dev->driver. usb_set_configuration() will call
>> + * device_bind_driver() explicitly after device_add(),
>> which
>> + * skips ->probe() and attaches knode_driver so teardown
>> is safe.
>> + */
>> + iface->claimed = 1;
>> + iface->claimed_driver = driver;
>> + }
>>
>> if (retval) {
>> dev->driver = NULL;
>> diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
>> index 75e2bfd74..73c630750 100644
>> --- a/drivers/usb/core/message.c
>> +++ b/drivers/usb/core/message.c
>> @@ -2269,8 +2269,23 @@ int usb_set_configuration(struct usb_device *dev,
>> int configuration)
>> if (ret != 0) {
>> dev_err(&dev->dev, "device_add(%s) --> %d\n",
>> dev_name(&intf->dev), ret);
>> + intf->claimed = 0;
>> + intf->claimed_driver = NULL;
>> continue;
>> }
>> + if (intf->claimed) {
>> + intf->dev.driver = &intf->claimed_driver->driver;
>> + ret = device_bind_driver(&intf->dev);
>> + if (ret) {
>> + dev_err(&dev->dev,
>> + "device_bind_driver(%s) --> %d\n",
>> + dev_name(&intf->dev), ret);
>> + intf->dev.driver = NULL;
>> + intf->condition = USB_INTERFACE_UNBOUND;
>> + }
>> + intf->claimed = 0;
>> + intf->claimed_driver = NULL;
>> + }
>> create_intf_ep_devs(intf);
>> }
>>
>> diff --git a/include/linux/usb.h b/include/linux/usb.h
>> index 1da4ad161..0ec743e76 100644
>> --- a/include/linux/usb.h
>> +++ b/include/linux/usb.h
>> @@ -266,6 +266,8 @@ struct usb_interface {
>> unsigned needs_binding:1; /* needs delayed unbind/rebind */
>> unsigned resetting_device:1; /* true: bandwidth alloc after
>> reset */
>> unsigned authorized:1; /* used for interface
>> authorization */
>> + unsigned claimed:1; /* driver claimed before
>> device_add() */
>> + struct usb_driver *claimed_driver; /* driver for deferred
>> bind */
>> enum usb_wireless_status wireless_status;
>> struct work_struct wireless_status_work;
>> --
>> 2.34.1
>>
>
next prev parent reply other threads:[~2026-09-03 6:46 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-19 17:18 [syzbot] [usb?] general protection fault in bus_remove_device syzbot
2026-08-20 4:34 ` Forwarded: [PATCH] driver core: avoid klist_remove() on unattached knode_driver syzbot
2026-08-20 5:30 ` [syzbot] [usb?] general protection fault in bus_remove_device Edward Adam Davis
2026-08-20 6:03 ` syzbot
2026-08-20 6:11 ` [PATCH] driver core: Do not remove the knode driver when autoprobe is disabled Edward Adam Davis
2026-08-20 6:13 ` Forwarded: [PATCH] driver core: avoid klist_remove() on unattached knode_driver syzbot
2026-09-03 6:37 ` Forwarded: Re: [PATCH] usb: core: fix GPF on disconnect when interface claimed before registration syzbot
2026-09-03 6:46 ` syzbot [this message]
2026-09-03 6:48 ` syzbot
2026-09-03 6:52 ` syzbot
2026-09-03 6:59 ` syzbot
2026-09-03 7:02 ` syzbot
2026-09-03 7:06 ` syzbot
2026-09-03 7:11 ` syzbot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6a9917c7.9266084e.bf0d7.00af.GAE@google.com \
--to=syzbot+87188222c77c0dbbdb4d@syzkaller.appspotmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.