From: syzbot <syzbot+9ca2c9f85bd8b5e46516@syzkaller.appspotmail.com>
To: linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com
Subject: Forwarded: Re: [syzbot] [usb?] INFO: task hung in usbatm_usb_disconnect (2)
Date: Wed, 23 Sep 2026 16:25:55 -0700 [thread overview]
Message-ID: <6ab46003.80e1c6cc.1e8e5f.0005.GAE@google.com> (raw)
In-Reply-To: <6ab152fc.71f81b7d.15fa6d.002f.GAE@google.com>
For archival purposes, forwarding an incoming command email to
linux-kernel@vger.kernel.org, syzkaller-bugs@googlegroups.com.
***
Subject: Re: [syzbot] [usb?] INFO: task hung in usbatm_usb_disconnect (2)
Author: valigurasm@gmail.com
#syz test: upstream master
On Thu, 24 Sept 2026, 01:01 syzbot, <
syzbot+9ca2c9f85bd8b5e46516@syzkaller.appspotmail.com> wrote:
> Hello,
>
> syzbot tried to test the proposed patch but the build/boot failed:
>
> lost connection to test machine
>
>
>
> Warning: Permanently added '10.128.1.106' (ED25519) to the list of known
> hosts.
> 2026/09/23 21:58:53 parsed 1 programs
> 2026/09/23 21:58:53 serving rpc on tcp://36741
> [ 108.303160][ T923] cfg80211: failed to load regulatory.db
> [ 112.594660][ T5628] cgroup: Unknown subsys name 'net'
> [ 112.732732][ T5628] cgroup: Unknown subsys name 'cpuset'
> [ 112.746517][ T5628] cgroup: Unknown subsys name 'rlimit'
> Setting up swapspace version 1, size = 127995904 bytes
> [ 114.653895][ T5628] Adding 124996k swap on ./swap-file. Priority:0
> extents:1 across:124996k
> [ 118.241459][ T5649] soft_limit_in_bytes is deprecated and will be
> removed. Writing any value to this file has no effect. Please report your
> usecase to linux-mm@kvack.org if you depend on this functionality.
> [ 118.312791][ T5649] ebtables: xtables 32bit compat interface no longer
> supported in namespaces and will be removed soon.
> [ 118.342551][ T5649] arp_tables: xtables 32bit compat interface no
> longer supported in namespaces and will be removed soon.
> [ 118.935095][ T1161] wlan0: Created IBSS using preconfigured BSSID
> 50:50:50:50:50:50
> [ 118.935132][ T1161] wlan0: Creating new IBSS network, BSSID
> 50:50:50:50:50:50
> [ 119.314186][ T60] wlan1: Created IBSS using preconfigured BSSID
> 50:50:50:50:50:50
> [ 119.314208][ T60] wlan1: Creating new IBSS network, BSSID
> 50:50:50:50:50:50
> [ 119.514008][ T5659] ip_tables: xtables 32bit compat interface no longer
> supported in namespaces and will be removed soon.
> [ 119.514671][ T5659] ip6_tables: xtables 32bit compat interface no
> longer supported in namespaces and will be removed soon.
> [ 120.499036][ T5685] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 >
> 1
> [ 120.504897][ T5685] Bluetooth: hci0: unexpected cc 0x1003 length: 249 >
> 9
> [ 120.505931][ T5685] Bluetooth: hci0: unexpected cc 0x1001 length: 249 >
> 9
> [ 120.507278][ T5685] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 >
> 4
> [ 120.541791][ T5685] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 >
> 2
> [ 122.840866][ T5680] bridge0: port 1(bridge_slave_0) entered blocking
> state
> [ 122.841743][ T5680] bridge0: port 1(bridge_slave_0) entered disabled
> state
> [ 122.842082][ T5680] bridge_slave_0: entered allmulticast mode
> [ 122.862531][ T5680] bridge_slave_0: entered promiscuous mode
> [ 122.889547][ T5680] bridge0: port 2(bridge_slave_1) entered blocking
> state
> [ 122.889656][ T5680] bridge0: port 2(bridge_slave_1) entered disabled
> state
> [ 122.889794][ T5680] bridge_slave_1: entered allmulticast mode
> [ 122.891937][ T5680] bridge_slave_1: entered promiscuous mode
> [ 122.984739][ T5680] bond0: (slave bond_slave_0): Enslaving as an active
> interface with an up link
> [ 123.001661][ T5680] bond0: (slave bond_slave_1): Enslaving as an active
> interface with an up link
> [ 123.051936][ T5680] team0: Port device team_slave_0 added
> [ 123.055615][ T5680] team0: Port device team_slave_1 added
> [ 123.112267][ T5680] batman_adv: batadv0: Adding interface:
> batadv_slave_0
> [ 123.112288][ T5680] batman_adv: batadv0: The MTU of interface
> batadv_slave_0 is too small (1500) to handle the transport of batman-adv
> packets. Packets going over this interface will be fragmented on layer2
> which could impact the performance. Setting the MTU to 1532 would solve the
> problem.
> [ 123.112327][ T5680] batman_adv: batadv0: Not using interface
> batadv_slave_0 (retrying later): interface not active
> [ 123.116516][ T5680] batman_adv: batadv0: Adding interface:
> batadv_slave_1
> [ 123.116534][ T5680] batman_adv: batadv0: The MTU of interface
> batadv_slave_1 is too small (1500) to handle the transport of batman-adv
> packets. Packets going over this interface will be fragmented on layer2
> which could impact the performance. Setting the MTU to 1532 would solve the
> problem.
> [ 123.116558][ T5680] batman_adv: batadv0: Not using interface
> batadv_slave_1 (retrying later): interface not active
> [ 123.261249][ T5680] hsr_slave_0: entered promiscuous mode
> [ 123.262263][ T5680] hsr_slave_1: entered promiscuous mode
> [ 123.471857][ T5680] netdevsim netdevsim8 netdevsim0: renamed from eth0
> [ 123.487856][ T5680] 8021q: adding VLAN 0 to HW filter on device
> netdevsim0
> [ 123.489120][ T5680] netdevsim netdevsim8 netdevsim1: renamed from eth1
> [ 123.493156][ T5680] 8021q: adding VLAN 0 to HW filter on device
> netdevsim1
> [ 123.494176][ T5680] netdevsim netdevsim8 netdevsim2: renamed from eth2
> [ 123.504829][ T5680] 8021q: adding VLAN 0 to HW filter on device
> netdevsim2
> [ 123.507973][ T5680] netdevsim netdevsim8 netdevsim3: renamed from eth3
> [ 123.548418][ T5680] 8021q: adding VLAN 0 to HW filter on device
> netdevsim3
> [ 123.652099][ T5680] 8021q: adding VLAN 0 to HW filter on device bond0
> [ 123.685093][ T5680] 8021q: adding VLAN 0 to HW filter on device team0
> [ 123.702139][ T60] bridge0: port 1(bridge_slave_0) entered blocking
> state
> [ 123.702279][ T60] bridge0: port 1(bridge_slave_0) entered forwarding
> state
> [ 123.730774][ T78] bridge0: port 2(bridge_slave_1) entered blocking
> state
> [ 123.730885][ T78] bridge0: port 2(bridge_slave_1) entered forwarding
> state
> [ 124.170694][ T5680] 8021q: adding VLAN 0 to HW filter on device batadv0
> [ 124.430316][ T5680] veth0_vlan: entered promiscuous mode
> [ 124.447342][ T5680] veth1_vlan: entered promiscuous mode
> [ 124.488229][ T5680] veth0_macvtap: entered promiscuous mode
> [ 124.492929][ T5680] veth1_macvtap: entered promiscuous mode
> [ 124.527631][ T5680] batman_adv: batadv0: Interface activated:
> batadv_slave_0
> [ 124.540115][ T5680] batman_adv: batadv0: Interface activated:
> batadv_slave_1
> execution of simple program fails: NOTFAIL: arptable checkpoint:
> getsockopt(ARPT_SO_GET_ENTRIES) failed. table=filter (errno 22: Invalid
> argument).
> [ 124.647568][ T1161] netdevsim netdevsim8 netdevsim0: set [1, 0] type 2
> family 0 port 6081 - 0
> [ 124.647619][ T1161] netdevsim netdevsim8 netdevsim1: set [1, 0] type 2
> family 0 port 6081 - 0
> [ 124.647655][ T1161] netdevsim netdevsim8 netdevsim2: set [1, 0] type 2
> family 0 port 6081 - 0
> [ 124.647690][ T1161] netdevsim netdevsim8 netdevsim3: set [1, 0] type 2
> family 0 port 6081 - 0
> [ 124.806492][ T1161] netdevsim netdevsim8 netdevsim3 (unregistering):
> unset [1, 0] type 2 family 0 port 6081 - 0
> [ 124.903314][ T1161] netdevsim netdevsim8 netdevsim2 (unregistering):
> unset [1, 0] type 2 family 0 port 6081 - 0
> [ 124.980877][ T1161] netdevsim netdevsim8 netdevsim1 (unregistering):
> unset [1, 0] type 2 family 0 port 6081 - 0
> [ 125.116872][ T1161] netdevsim netdevsim8 netdevsim0 (unregistering):
> unset [1, 0] type 2 family 0 port 6081 - 0
> [ 125.883310][ T1161] bridge_slave_1: left allmulticast mode
> [ 125.883361][ T1161] bridge_slave_1: left promiscuous mode
> [ 125.884401][ T1161] bridge0: port 2(bridge_slave_1) entered disabled
> state
> [ 125.920237][ T1161] bridge_slave_0: left allmulticast mode
> [ 125.920268][ T1161] bridge_slave_0: left promiscuous mode
> [ 125.920607][ T1161] bridge0: port 1(bridge_slave_0) entered disabled
> state
> [ 126.095488][ T1161] bond0 (unregistering): (slave bond_slave_0):
> Releasing backup interface
> [ 126.110922][ T1161] bond0 (unregistering): (slave bond_slave_1):
> Releasing backup interface
> [ 126.112236][ T1161] bond0 (unregistering): Released all slaves
> [ 126.223248][ T1161] hsr_slave_0: left promiscuous mode
> [ 126.226835][ T1161] hsr_slave_1: left promiscuous mode
> [ 126.233387][ T1161] batman_adv: batadv0: Interface deactivated:
> batadv_slave_0
> [ 126.233431][ T1161] batman_adv: batadv0: Removing interface:
> batadv_slave_0
> [ 126.241512][ T1161] batman_adv: batadv0: Interface deactivated:
> batadv_slave_1
> [ 126.241585][ T1161] batman_adv: batadv0: Removing interface:
> batadv_slave_1
> [ 126.286396][ T1161] veth1_macvtap: left promiscuous mode
> [ 126.286461][ T1161] veth0_macvtap: left promiscuous mode
> [ 126.286648][ T1161] veth1_vlan: left promiscuous mode
> [ 126.286760][ T1161] veth0_vlan: left promiscuous mode
> [ 126.654559][ T1161] team0 (unregistering): Port device team_slave_1
> removed
> [ 126.682089][ T1161] team0 (unregistering): Port device team_slave_0
> removed
> [ 126.875676][ T5279] 8021q: adding VLAN 0 to HW filter on device eth1
> [ 127.409335][ T5279] 8021q: adding VLAN 0 to HW filter on device eth2
> [ 127.993497][ T5279] 8021q: adding VLAN 0 to HW filter on device eth3
> [ 128.438182][ T5279] 8021q: adding VLAN 0 to HW filter on device eth4
> [ 139.019729][ T1313] ieee802154 phy0 wpan0: encryption failed: -22
> [ 139.019831][ T1313] ieee802154 phy1 wpan1: encryption failed: -22
>
>
> syzkaller build log:
> go env (err=<nil>)
> AR='ar'
> CC='gcc'
> CGO_CFLAGS='-O2 -g'
> CGO_CPPFLAGS=''
> CGO_CXXFLAGS='-O2 -g'
> CGO_ENABLED='1'
> CGO_FFLAGS='-O2 -g'
> CGO_LDFLAGS='-O2 -g'
> CXX='g++'
> GCCGO='gccgo'
> GO111MODULE='auto'
> GOAMD64='v1'
> GOARCH='amd64'
> GOAUTH='netrc'
> GOBIN=''
> GOCACHE='/syzkaller/.cache/go-build'
> GOCACHEPROG=''
> GODEBUG=''
> GOENV='/syzkaller/.config/go/env'
> GOEXE=''
> GOEXPERIMENT=''
> GOFIPS140='off'
> GOFLAGS=''
> GOGCCFLAGS='-fPIC -m64 -pthread -Wl,--no-gc-sections -fmessage-length=0
> -ffile-prefix-map=/tmp/go-build3081947690=/tmp/go-build
> -gno-record-gcc-switches'
> GOHOSTARCH='amd64'
> GOHOSTOS='linux'
> GOINSECURE=''
> GOMOD='/syzkaller/jobs-2/linux/gopath/src/
> github.com/google/syzkaller/go.mod'
> GOMODCACHE='/syzkaller/jobs-2/linux/gopath/pkg/mod'
> GONOPROXY=''
> GONOSUMDB=''
> GOOS='linux'
> GOPATH='/syzkaller/jobs-2/linux/gopath'
> GOPRIVATE=''
> GOPROXY='https://proxy.golang.org,direct'
> GOROOT='/usr/local/go'
> GOSUMDB='sum.golang.org'
> GOTELEMETRY='local'
> GOTELEMETRYDIR='/syzkaller/.config/go/telemetry'
> GOTMPDIR=''
> GOTOOLCHAIN='auto'
> GOTOOLDIR='/usr/local/go/pkg/tool/linux_amd64'
> GOVCS=''
> GOVERSION='go1.26.0'
> GOWORK=''
> PKG_CONFIG='pkg-config'
>
> git status (err=<nil>)
> HEAD detached at 853b104bb45
> nothing to commit, working tree clean
>
>
> tput: No value for $TERM and no -T specified
> tput: No value for $TERM and no -T specified
> Makefile:31: run command via tools/syz-env for best compatibility, see:
> Makefile:32:
> https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
> go list -f '{{.Stale}}' -ldflags="-s -w -X
> github.com/google/syzkaller/prog.GitRevision=853b104bb454141a5b0fc0e4218ec78e9f34ffb1
> -X github.com/google/syzkaller/prog.gitRevisionDate=20260918-062331"
> ./sys/syz-sysgen | grep -q false || go install -ldflags="-s -w -X
> github.com/google/syzkaller/prog.GitRevision=853b104bb454141a5b0fc0e4218ec78e9f34ffb1
> -X github.com/google/syzkaller/prog.gitRevisionDate=20260918-062331"
> ./sys/syz-sysgen
> make .descriptions
> tput: No value for $TERM and no -T specified
> tput: No value for $TERM and no -T specified
> Makefile:31: run command via tools/syz-env for best compatibility, see:
> Makefile:32:
> https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-env
> bin/syz-sysgen
> <https://github.com/google/syzkaller/blob/master/docs/contributing.md#using-syz-envbin/syz-sysgen>
> touch .descriptions
> GOOS=linux GOARCH=amd64 go build -ldflags="-s -w -X
> github.com/google/syzkaller/prog.GitRevision=853b104bb454141a5b0fc0e4218ec78e9f34ffb1
> -X github.com/google/syzkaller/prog.gitRevisionDate=20260918-062331" -o
> ./bin/linux_amd64/syz-execprog
> github.com/google/syzkaller/tools/syz-execprog
> mkdir -p ./bin/linux_386
> x86_64-linux-gnu-g++ -o ./bin/linux_386/syz-executor executor/executor.cc \
> -m32 -O2 -pthread -Wall -Werror -Wparentheses
> -Wunused-const-variable -Wframe-larger-than=16384 -Wno-stringop-overflow
> -Wno-array-bounds -Wno-format-overflow -Wno-unused-but-set-variable
> -Wno-unused-command-line-argument -static-pie -std=c++17 -I.
> -Iexecutor/_include -DGOOS_linux=1 -DGOARCH_386=1 \
> -DHOSTGOOS_linux=1
> -DGIT_REVISION=\"853b104bb454141a5b0fc0e4218ec78e9f34ffb1\"
> /usr/bin/ld: /tmp/cctVKtvW.o: in function `Connection::Connect(char
> const*, char const*)':
> executor.cc:(.text._ZN10Connection7ConnectEPKcS1_[_ZN10Connection7ConnectEPKcS1_]+0x145):
> warning: Using 'gethostbyname' in statically linked applications requires
> at runtime the shared libraries from the glibc version used for linking
> ./tools/check-syzos.sh 2>/dev/null
> [INFO] Unsupported architecture '386', skipping check.
>
>
>
> Tested on:
>
> commit: fe2ec837 Merge tag 'hid-for-linus-2026092202' of git:/..
> git tree: upstream
> kernel config: https://syzkaller.appspot.com/x/.config?x=9d4242cb1c54cdf7
> dashboard link:
> https://syzkaller.appspot.com/bug?extid=9ca2c9f85bd8b5e46516
> compiler: Debian clang version 22.1.8
> (++20260613092233+e80beda6e255-1~exp1~20260613092250.77), Debian LLD 22.1.8
> userspace arch: i386
> patch:
> https://syzkaller.appspot.com/x/patch.diff?x=11123405580000
>
>
prev parent reply other threads:[~2026-09-23 23:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-21 15:53 [syzbot] [usb?] INFO: task hung in usbatm_usb_disconnect (2) syzbot
2026-09-23 19:27 ` Forwarded: #syz test: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master syzbot
2026-09-23 23:25 ` syzbot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6ab46003.80e1c6cc.1e8e5f.0005.GAE@google.com \
--to=syzbot+9ca2c9f85bd8b5e46516@syzkaller.appspotmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=syzkaller-bugs@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.