From: "D.W." <sword@gmx.de>
To: bluez-users@lists.sourceforge.net
Subject: [Bluez-users] Network Access Point - pairing problem
Date: Thu, 4 Nov 2004 11:22:29 +0100 (MET) [thread overview]
Message-ID: <7166.1099563749@www18.gmx.net> (raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="us-ascii", Size: 2550 bytes --]
Hi Marcel,
this is the output when I execute hciconfig -a.
hci0: Type: USB
BD Address: 00:02:5B:01:21:14 ACL MTU: 192:8 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:936 acl:0 sco:0 events:23 errors:0
TX bytes:327 acl:0 sco:0 commands:22 errors:0
Features: 0xff 0xff 0x0f 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: HOLD SNIFF PARK
Link mode: ACCEPT MASTER
Name: 'BlueZ (0)'
Class: 0x000100
Service Classes: Unspecified
Device Class: Computer, Uncategorized
HCI Ver: 1.1 (0x1) HCI Rev: 0x110 LMP Ver: 1.1 (0x1) LMP Subver: 0x110
Manufacturer: Cambridge Silicon Radio (10)
This is the output while trying to connect to the NAP at first contact:
HCIDump - HCI packet analyzer ver 1.5
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request(0x04) plen 10
B0 3A 4C 3D 0F 00 04 01 52 01
< HCI Command: Accept Connection Request(0x01|0x0009) plen 7
B0 3A 4C 3D 0F 00 00
> HCI Event: Command Status(0x0f) plen 4
00 01 09 04
> HCI Event: Role Change(0x12) plen 8
00 B0 3A 4C 3D 0F 00 00
> HCI Event: Connect Complete(0x03) plen 11
00 28 00 B0 3A 4C 3D 0F 00 01 00
< HCI Command: Write Link Policy Settings(0x02|0x000d) plen 4
28 00 0E 00
> HCI Event: Page Scan Repetition Mode Change(0x20) plen 7
B0 3A 4C 3D 0F 00 01
> HCI Event: Max Slots Change(0x1b) plen 3
28 00 05
> HCI Event: Command Complete(0x0e) plen 6
01 0D 08 00 28 00
< HCI Command: Change Connection Packet Type(0x01|0x000f) plen 4
28 00 18 CC
> HCI Event: Command Status(0x0f) plen 4
00 01 0F 04
> HCI Event: Connection Packet Type Changed(0x1d) plen 5
00 28 00 18 CC
> HCI Event: PIN Code Request(0x16) plen 6
B0 3A 4C 3D 0F 00
< HCI Command: PIN Code Request Reply(0x01|0x000d) plen 23
B0 3A 4C 3D 0F 00 05 42 6C 75 65 5A 00 00 00 00 00 00 00 00
00 00 00
> HCI Event: Command Complete(0x0e) plen 10
01 0D 04 00 B0 3A 4C 3D 0F 00
> HCI Event: Disconn Complete(0x05) plen 4
00 28 00 05
Regards Daniel
--
NEU +++ DSL Komplett von GMX +++ http://www.gmx.net/de/go/dsl
GMX DSL-Netzanschluss + Tarif zum supergünstigen Komplett-Preis!
-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next reply other threads:[~2004-11-04 10:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-11-04 10:22 D.W. [this message]
2004-11-04 11:05 ` [Bluez-users] Network Access Point - pairing problem Marcel Holtmann
2004-11-04 13:43 ` Jouni.Lohikoski@iki.fi
2004-11-04 14:22 ` Marcel Holtmann
2004-11-05 14:00 ` [Bluez-users] AW: Re: Again dund Peter K. Martin
2004-11-05 14:27 ` Marcel Holtmann
2004-11-05 17:46 ` AW: [Bluez-users] " Peter K. Martin
2004-11-05 20:18 ` Marcel Holtmann
2004-11-08 8:50 ` AW: " Peter K. Martin
2004-11-08 11:29 ` Marcel Holtmann
2004-11-08 14:37 ` AW: " Peter K. Martin
2004-11-08 14:54 ` Marcel Holtmann
2004-11-08 18:09 ` AW: " Peter K. Martin
2004-11-08 18:38 ` Marcel Holtmann
2004-11-09 9:01 ` AW: " Peter K. Martin
2004-11-04 12:59 ` [Bluez-users] Network Access Point - pairing problem D.W.
2004-11-04 13:36 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2004-11-03 19:24 D.W.
2004-11-03 20:15 ` Marcel Holtmann
2004-11-02 22:07 D.W.
2004-11-03 0:07 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7166.1099563749@www18.gmx.net \
--to=sword@gmx.de \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.