From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: by yocto-www.yoctoproject.org (Postfix, from userid 118) id 1325CE00CDE; Fri, 2 Oct 2015 08:35:16 -0700 (PDT) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on yocto-www.yoctoproject.org X-Spam-Level: X-Spam-Status: No, score=-2.7 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HTML_MESSAGE,RCVD_IN_DNSWL_LOW autolearn=ham version=3.3.1 X-Spam-HAM-Report: * -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low * trust * [98.138.91.230 listed in list.dnswl.org] * -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% * [score: 0.0000] * 0.0 HTML_MESSAGE BODY: HTML included in message * -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's * domain * 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily * valid * -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature Received: from nm8-vm5.bullet.mail.ne1.yahoo.com (nm8-vm5.bullet.mail.ne1.yahoo.com [98.138.91.230]) by yocto-www.yoctoproject.org (Postfix) with ESMTP id 63E3DE006F6 for ; Fri, 2 Oct 2015 08:35:09 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=sbcglobal.net; s=s2048; t=1443800108; bh=9S6GPgtwNbs9t+EzzxWRF0Tr0tHx9aAyIGOzeS05XbM=; h=Date:From:Reply-To:To:In-Reply-To:References:Subject:From:Subject; b=fZxcok04hWCQWkin4QtcakVQv73ZjmRZi9H1MhUgosuZgdFyzZoQkTozRisdeI2dZwCMn6ZbVyPimQPtIrivqevoT1gHK1o3ZBaASul4gHaah2fXLF/TGRJUtq/PMN2m6EA3XoFYVJ3EItNy6jk/X64dJTOW3pop8yJHhxTYNDivEYT8rWQPSnxr1s3h4Ok8LebYfTbF5gTJUuI1BBevfcu4ZurO4gJ9GBW5t1hZrG/1+aJ4sLOJ/bFruNtVNFPWDW0ywnafeuYIJjqG8LRDxwvDK1P+OUPZivYfn1DNdKVndoCLyBUN7lOXdqehf2jhr3B2TaVQNBHrbfKYu/l5lQ== Received: from [98.138.100.102] by nm8.bullet.mail.ne1.yahoo.com with NNFMP; 02 Oct 2015 15:35:08 -0000 Received: from [98.138.226.161] by tm101.bullet.mail.ne1.yahoo.com with NNFMP; 02 Oct 2015 15:35:08 -0000 Received: from [127.0.0.1] by omp1062.mail.ne1.yahoo.com with NNFMP; 02 Oct 2015 15:35:08 -0000 X-Yahoo-Newman-Property: ymail-3 X-Yahoo-Newman-Id: 804615.88921.bm@omp1062.mail.ne1.yahoo.com X-YMail-OSG: tjThSR0VM1n8GCV3rH3xcrtnSESzH2IYdz57UlsMGSue4Xf8OXqdh2_TbsLxQT4 SFM3WVqZlgWpMx2DaAjfl5DNcRvN8SFtxBKlAcGRJWAj900fN4Or.w5RhPz._Nw9pFL85T8SzwJr rbRfI946M7xffKo7kyV2al2ep6O6K773dxn7L3411i2SmOz.mnC5TCwvm2vQS4Kqdu2.uWIpRf76 .d3D56OsP.UBbNQOjB7c8ljERiuVJfmI_vOmXRlmeja_G2G5SLIT.yX3p4QP1Dg8B9ASW27r67ds nfyv_ZIKtPXu5NP3A39sUIhCnDUoCIWnliTjjAdyEMA7BhMEcgnBmDttsFcEZv.NHODd39Unawwc k88oFu2HzyGWwj39__qJRE1vG8qakRVxuMBMZAF1vmquNKbyYwqOjaav5xu4tn45FiLc3RE7XmwD Ff847WbJIWi2iYRzwRQmbrL.Ox_mFMDimczjIh535eZOm8fPriuGmLz35yEvVdtCYpr7B4oCKwLE qVAohmw84IH7sLcSH0d.9.9NToRwNE6OEYrtzPlTNBylT2NAeC15paJXco_s- Received: by 98.138.101.163; Fri, 02 Oct 2015 15:35:08 +0000 Date: Fri, 2 Oct 2015 15:34:32 +0000 (UTC) From: Edward Vidal To: "yocto@yoctoproject.org" Message-ID: <717519649.323138.1443800072056.JavaMail.yahoo@mail.yahoo.com> In-Reply-To: References: MIME-Version: 1.0 Subject: Re: wpa_supplicant on Raspberry Pi 2B X-BeenThere: yocto@yoctoproject.org X-Mailman-Version: 2.1.13 Precedence: list Reply-To: Edward Vidal List-Id: Discussion of all things Yocto Project List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Oct 2015 15:35:16 -0000 Content-Type: multipart/alternative; boundary="----=_Part_323137_608180059.1443800072042" ------=_Part_323137_608180059.1443800072042 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Hi Philip & Daniel,I modified interface diff -u interfaces.orig interfaces= =20 --- interfaces.orig=C2=A0=C2=A0=C2=A0 2015-09-15 04:53:28.759998719 +0000 +++ interfaces=C2=A0=C2=A0=C2=A0 2015-09-15 04:54:16.999998700 +0000 @@ -8,8 +8,8 @@ =C2=A0iface wlan0 inet dhcp =C2=A0=C2=A0=C2=A0=C2=A0 wireless_mode managed =C2=A0=C2=A0=C2=A0=C2=A0 wireless_essid any -=C2=A0=C2=A0=C2=A0 wpa-driver wext -=C2=A0=C2=A0=C2=A0 wpa-conf /etc/wpa_supplicant.conf +=C2=A0=C2=A0=C2=A0 wpa-driver nl80211 +=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0=C2=A0 wpa-conf /etc/wpa_supplicant.co= nf =C2=A0 =C2=A0iface atml0 inet dhcp =C2=A0Also ran the wpa_cli stat root@raspberrypi2:/etc/network# wpa_cli stat Failed to connect to non-global ctrl_ifname: (nil)=C2=A0 error: Success=C2= =A0and=20 wpa_cli -i wlan0=C2=A0=C2=A0=C2=A0 =C2=A0wpa_cli v2.4 Copyright (c) 2004-2015, Jouni Malinen and contributors This software may be distributed under the terms of the BSD license. See README for more details. Interactive mode Could not connect to wpa_supplicant: wlan0 - re-tryingStill no success.=20 Thanks=20 Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613=20 On Friday, October 2, 2015 9:09 AM, "yocto-request@yoctoproject.org" <= yocto-request@yoctoproject.org> wrote: =20 Send yocto mailing list submissions to =C2=A0=C2=A0=C2=A0 yocto@yoctoproject.org To subscribe or unsubscribe via the World Wide Web, visit =C2=A0=C2=A0=C2=A0 https://lists.yoctoproject.org/listinfo/yocto or, via email, send a message with subject or body 'help' to =C2=A0=C2=A0=C2=A0 yocto-request@yoctoproject.org You can reach the person managing the list at =C2=A0=C2=A0=C2=A0 yocto-owner@yoctoproject.org When replying, please edit your Subject line so it is more specific than "Re: Contents of yocto digest..." Today's Topics: =C2=A0 1. Release Candidate Build for yocto-2.0.rc1.rc1 now available. =C2=A0 =C2=A0 =C2=A0 (Poky Build User) =C2=A0 2. Re: Safely cleaning 'downloads' (Laurentiu Palcu) =C2=A0 3. Re: [linux-yocto] [raspberryp2] Error during the build of =C2=A0 =C2=A0 =C2=A0 linux kernel (Trevor Woerner) =C2=A0 4. wpa_supplicant on Raspberry Pi 2B (Edward Vidal) =C2=A0 5. Re: wpa_supplicant on Raspberry Pi 2B (Philip Balister) =C2=A0 6. Re: wpa_supplicant on Raspberry Pi 2B (Daniel.) ---------------------------------------------------------------------- Message: 1 Date: Fri, 02 Oct 2015 07:04:04 +0000 From: "Poky Build User" To: yocto@yoctoproject.org Cc: otavio@ossystems.com.br Subject: [yocto] Release Candidate Build for yocto-2.0.rc1.rc1 now =C2=A0=C2=A0=C2=A0 available. Message-ID: <20151002070407.D2B43E00D10@yocto-www.yoctoproject.org> Content-Type: text/plain; charset=3Dus-ascii A release candidate build for yocto-2.0.rc1 is now available at: =20 http://autobuilder.yoctoproject.org/pub/releases/yocto-2.0.rc1 Please begin QA on this build as soon as possible. Build hash information:=20 meta-intel : 84c049b9cb80b50fd32b716c2ae97e3f0d4e3cd7=20 meta-fsl-arm : 10471566d2868b07f8ac832b94d5e98a463826ba=20 meta-minnow : 9c965ef5252e383843d796cd8b50c61b3034b6ae=20 meta-qt3 : 5233565c80db869f6f539f37f26ea6662d9dc5f6=20 meta-fsl-ppc : 59fc0c33d2de5db65af4c09c4d28fd78fa0f7b4f=20 poky : eac61f37e36099f74485dab398b57f3812826d17=20 This is an automated message from The Yocto Project Autobuilder Git: git://git.yoctoproject.org/yocto-autobuilder Email: elizabeth.flanagan@intel.com=20 ------------------------------ Message: 2 Date: Fri, 2 Oct 2015 14:43:37 +0300 From: Laurentiu Palcu To: Gary Thomas Cc: Yocto Project Subject: Re: [yocto] Safely cleaning 'downloads' Message-ID: <20151002114337.GG15509@lpalcu-desk> Content-Type: text/plain; charset=3Dus-ascii Hi Garry, It's probably a little late (I'm not reading the Yocto mailing lists very often now) but sometime ago I ran out of space myself and I wrote this script that I sent out on oe-core mailing list. It did the job for me. For some reason it didn't make it in master but maybe you find it useful. I didn't test it since then though. Maybe things changed, I don't know. Give it a try if you wish. If you want to play safe, I recommend making a copy of your downloads directory (if you have space left). :) http://lists.openembedded.org/pipermail/openembedded-core/2015-June/106026.= html laurentiu On Wed, Sep 30, 2015 at 06:13:39AM -0600, Gary Thomas wrote: > Over time, I tend to build in the same build tree many, many > times.=C2=A0 This leads to some really big trees as many things are > duplicated, especially in the 'downloads' directory. >=20 > I use local mirrors and hence my 'downloads' directory is > _mostly_ populated with symbolic links.=C2=A0 However, there are > also expanded SCM packages, e.g. git2/xxx >=20 > How can I safely clean up the 'downloads' directory?=C2=A0 I already > copy any created tarballs (I use BB_GENERATE_MIRROR_TARBALLS=3D"1" > to preclude unneeded downloads) to my mirror, but I'd like to > periodically clean out the whole directory (without disturbing > my builds of course).=C2=A0 I've found out the hard way that just > emptying seems to be unsafe, at least for some recipes like > the [RaspberryPi] Linux kernel recipe which once built seems > to expect the expanded git2/xxx tree to remain. >=20 > Just trying to find ways to recover my lost GB... >=20 > Thanks for any ideas >=20 > --=20 > ------------------------------------------------------------ > Gary Thomas=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 |=C2= =A0 Consulting for the > MLB Associates=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 |=C2=A0 = =C2=A0 Embedded world > ------------------------------------------------------------ > --=20 > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto ------------------------------ Message: 3 Date: Fri, 2 Oct 2015 08:02:49 -0400 From: Trevor Woerner To: Karim ATIKI Cc: "yocto@yoctoproject.org" Subject: Re: [yocto] [linux-yocto] [raspberryp2] Error during the =C2=A0=C2=A0=C2=A0 build of linux kernel Message-ID: <560E7269.6090903@gmail.com> Content-Type: text/plain; charset=3Dwindows-1252 On 10/02/15 07:58, Karim ATIKI wrote: > Hello Trevor, > > Thanks for your feedback. > You really think that "Fido" is an older release ? Sorry, I didn't mean to imply it was "old" and therefore should be avoided, I meant to point out that it was something that was released before the switch to gcc5 by default :-) > Is the 1.9 release of Yocto stable enough yet ? And will this pb be > fixed as well ? I think the next release will be 2.0. Whether or not it is stable enough is something you will have to evaluate for yourself :-) I'm rather certain this issue is already fixed in master, therefore it should be available for the next release. > > Karim Did you really mean to reply personally? I've re-CC'ed the list, hope you don't mind. ------------------------------ Message: 4 Date: Fri, 2 Oct 2015 14:27:58 +0000 (UTC) From: Edward Vidal To: "yocto@yoctoproject.org" Subject: [yocto] wpa_supplicant on Raspberry Pi 2B Message-ID: =C2=A0=C2=A0=C2=A0 <1006153332.270433.1443796078701.JavaMail.yahoo@mail.yah= oo.com> Content-Type: text/plain; charset=3D"utf-8" Hello all,I am using a Wi-Pi wireless adapter.? My image has the following packages installed. wpa-supplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-cli-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-dev-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon wpa-supplicant-passphrase-2.4-r0.cortexa7hf_vfp_vfpv4_neon Do I need any additional packages? My wired eth0 works okay. Which document has the most current information on setting up wireless netw= orking?From the information at=20 http://trac.gateworks.com/wiki/Yocto/Wireless I modified my /etc/wpa_supplicant.conf as below without success. ctrl_interface=3D/var/run/wpa_supplicant ctrl_interface_group=3D0 update_config=3D1 network=3D{ ??????? scan_ssid=3D1 ??????? ssid=3D"myssid" ??????? psk=3D"mypsk" ??????? proto=3DWPA ??????? key_mgmt=3DWPA-PSK }Below is the results I get when I run iwconfig. iwconfig=20 wlan0???? IEEE 802.11bgn? ESSID:off/any?=20 ????????? Mode:Managed? Access Point: Not-Associated?? Tx-Power=3D0 dBm??= =20 ????????? Retry short limit:7?? RTS thr:off?? Fragment thr:off ????????? Encryption key:off ????????? Power Management:off ?????????=20 lo??????? no wireless extensions. eth0????? no wireless extensions. Thanks in advance.? Any help is appreciated. Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 -------------- next part -------------- An HTML attachment was scrubbed... URL: ------------------------------ Message: 5 Date: Fri, 2 Oct 2015 10:56:37 -0400 From: Philip Balister To: Edward Vidal ,=C2=A0=C2=A0=C2=A0 "yocto@yoctopr= oject.org" =C2=A0=C2=A0=C2=A0 Subject: Re: [yocto] wpa_supplicant on Raspberry Pi 2B Message-ID: <560E9B25.5030303@balister.org> Content-Type: text/plain; charset=3Dwindows-1252 On 10/02/2015 10:27 AM, Edward Vidal wrote: > Hello all,I am using a Wi-Pi wireless adapter.=20 > My image has the following packages installed. > wpa-supplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon > wpa-supplicant-cli-2.4-r0.cortexa7hf_vfp_vfpv4_neon > wpa-supplicant-dev-2.4-r0.cortexa7hf_vfp_vfpv4_neon > wpa-supplicant-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon > wpa-supplicant-passphrase-2.4-r0.cortexa7hf_vfp_vfpv4_neon > Do I need any additional packages? > My wired eth0 works okay. > Which document has the most current information on setting up wireless ne= tworking?From the information at=20 >=C2=A0 http://trac.gateworks.com/wiki/Yocto/Wireless >=20 > I modified my /etc/wpa_supplicant.conf as below without success. > ctrl_interface=3D/var/run/wpa_supplicant > ctrl_interface_group=3D0 > update_config=3D1 >=20 Try modifying /etc/network/interfaces like this: https://github.com/EttusResearch/meta-ettus/commit/da86e76d116798e386d073a1= 8453aabb6179a09a#diff-063964fa6e41065c7868b13b1b1644eaR11 it seems wireless extensions are deprecated and you should use the nl80211 driver now. Philip > network=3D{ >=C2=A0 =C2=A0 =C2=A0 =C2=A0 scan_ssid=3D1 >=C2=A0 =C2=A0 =C2=A0 =C2=A0 ssid=3D"myssid" >=C2=A0 =C2=A0 =C2=A0 =C2=A0 psk=3D"mypsk" >=C2=A0 =C2=A0 =C2=A0 =C2=A0 proto=3DWPA >=C2=A0 =C2=A0 =C2=A0 =C2=A0 key_mgmt=3DWPA-PSK > }Below is the results I get when I run iwconfig. > iwconfig=20 > wlan0=C2=A0 =C2=A0 IEEE 802.11bgn=C2=A0 ESSID:off/any=C2=A0=20 >=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Mode:Managed=C2=A0 Access Point: Not-As= sociated=C2=A0 Tx-Power=3D0 dBm=C2=A0=20 >=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Retry short limit:7=C2=A0 RTS thr:off= =C2=A0 Fragment thr:off >=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Encryption key:off >=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Power Management:off >=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0=20 > lo=C2=A0 =C2=A0 =C2=A0 =C2=A0 no wireless extensions. >=20 > eth0=C2=A0 =C2=A0 =C2=A0 no wireless extensions. > Thanks in advance.=C2=A0 Any help is appreciated. >=20 >=C2=A0 Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 >=20 >=20 >=20 ------------------------------ Message: 6 Date: Fri, 2 Oct 2015 12:08:28 -0300 From: "Daniel." Cc: "yocto@yoctoproject.org" Subject: Re: [yocto] wpa_supplicant on Raspberry Pi 2B Message-ID: =C2=A0=C2=A0=C2=A0 Content-Type: text/plain; charset=3DUTF-8 What `wpa_cli stat' returns? Regards, 2015-10-02 11:56 GMT-03:00 Philip Balister : > On 10/02/2015 10:27 AM, Edward Vidal wrote: >> Hello all,I am using a Wi-Pi wireless adapter. >> My image has the following packages installed. >> wpa-supplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon >> wpa-supplicant-cli-2.4-r0.cortexa7hf_vfp_vfpv4_neon >> wpa-supplicant-dev-2.4-r0.cortexa7hf_vfp_vfpv4_neon >> wpa-supplicant-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon >> wpa-supplicant-passphrase-2.4-r0.cortexa7hf_vfp_vfpv4_neon >> Do I need any additional packages? >> My wired eth0 works okay. >> Which document has the most current information on setting up wireless n= etworking?From the information at >>=C2=A0 http://trac.gateworks.com/wiki/Yocto/Wireless >> >> I modified my /etc/wpa_supplicant.conf as below without success. >> ctrl_interface=3D/var/run/wpa_supplicant >> ctrl_interface_group=3D0 >> update_config=3D1 >> > > Try modifying /etc/network/interfaces like this: > > https://github.com/EttusResearch/meta-ettus/commit/da86e76d116798e386d073= a18453aabb6179a09a#diff-063964fa6e41065c7868b13b1b1644eaR11 > > it seems wireless extensions are deprecated and you should use the > nl80211 driver now. > > Philip > > >> network=3D{ >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 scan_ssid=3D1 >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 ssid=3D"myssid" >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 psk=3D"mypsk" >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 proto=3DWPA >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 key_mgmt=3DWPA-PSK >> }Below is the results I get when I run iwconfig. >> iwconfig >> wlan0=C2=A0 =C2=A0 IEEE 802.11bgn=C2=A0 ESSID:off/any >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Mode:Managed=C2=A0 Access Point: Not-A= ssociated=C2=A0 Tx-Power=3D0 dBm >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Retry short limit:7=C2=A0 RTS thr:off= =C2=A0 Fragment thr:off >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Encryption key:off >>=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 Power Management:off >> >> lo=C2=A0 =C2=A0 =C2=A0 =C2=A0 no wireless extensions. >> >> eth0=C2=A0 =C2=A0 =C2=A0 no wireless extensions. >> Thanks in advance.=C2=A0 Any help is appreciated. >> >>=C2=A0 Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1613 >> >> >> > -- > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto --=20 "Do or do not. There is no try" =C2=A0 Yoda Master ------------------------------ --=20 _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto End of yocto Digest, Vol 61, Issue 8 ************************************ ------=_Part_323137_608180059.1443800072042 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable
Hi Philip & Daniel,
I modified interface
diff= -u interfaces.orig interfaces
--- interfaces.orig    2015-09-15 04:53:28.759998= 719 +0000
+++ interfa= ces    2015-09-15 04:54:16.999998700 +0000
@@ -8,8 +8,8 @@
 iface wlan0 inet dhcp
     wireless_m= ode managed
 &nb= sp;   wireless_essid any
-    wpa-driver wext
-    wpa-conf /etc/wpa_supplica= nt.conf
+  =   wpa-driver nl80211
+        wpa-conf /etc/wpa_supplica= nt.conf
 
 iface atml0 inet dhcp=
 Also ran the w= pa_cli stat
root@rasp= berrypi2:/etc/network# wpa_cli stat
Failed to connect to non-global ctrl_ifname: (nil)  err= or: Success
 and
wpa_cli -i wlan0     wpa_cli v2.4
Copyrig= ht (c) 2004-2015, Jouni Malinen <j@w1.fi> and contributors

This software may be distributed under the terms = of the BSD license.
S= ee README for more details.



Interactive mode

Could not connect to= wpa_supplicant: wlan0 - re-trying
Still no success.
Thanks
Edward Vidal Jr. e-mail develo= ne@sbcglobal.net 915-595-1613


<= br>
On Friday, Octo= ber 2, 2015 9:09 AM, "yocto-request@yoctoproject.org" <yocto-request@yoc= toproject.org> wrote:


Send yocto mailing list submissions to
    yocto@yoctoproject.org

To subscribe or unsubscribe via the = World Wide Web, visit
    https://lists.yoctoproject.org= /listinfo/yocto
or, via email, send a message with subject or body '= help' to
    yocto-request@yocto= project.org

You can reach the person managing the list at
&nb= sp;   yocto-owner@yoctoproject.org
When replying, please edit your Subject line so it is more specific
th= an "Re: Contents of yocto digest..."


Today's Topics:

&nbs= p; 1. Release Candidate Build for yocto-2.0.rc1.rc1 now available.
&nbs= p;     (Poky Build User)
  2. Re: Safely cleaning 'downl= oads' (Laurentiu Palcu)
  3. Re: [linux-yocto] [raspberryp2] Error= during the build of
      linux kernel (Trevor Woerner)<= br>  4. wpa_supplicant on Raspberry Pi 2B (Edward Vidal)
  5= . Re: wpa_supplicant on Raspberry Pi 2B (Philip Balister)
  6. Re:= wpa_supplicant on Raspberry Pi 2B (Daniel.)


-------------------= ---------------------------------------------------

Message: 1
Da= te: Fri, 02 Oct 2015 07:04:04 +0000
From: "Poky Build User" <pokybuild@fedora21.osl.yoctoproject.org<= /a>>
To: yocto@yoctoproject.org
Cc: otavio= @ossystems.com.br
Subject: [yocto] Release Candidate Build for yocto= -2.0.rc1.rc1 now
    available.
Message-ID: <201510020= 70407.D2B43E00D10@yocto-www.yoctoproject.org>
Content-Type: text/= plain; charset=3Dus-ascii


A release candidate build for yocto-2.= 0.rc1 is now available at:


http://autobuilder= .yoctoproject.org/pub/releases/yocto-2.0.rc1


Please begin QA= on this build as soon as possible.


Build hash information:
= meta-intel : 84c049b9cb80b50fd32b716c2ae97e3f0d4e3cd7
meta-fsl-arm : 10= 471566d2868b07f8ac832b94d5e98a463826ba
meta-minnow : 9c965ef5252e383843= d796cd8b50c61b3034b6ae
meta-qt3 : 5233565c80db869f6f539f37f26ea6662d9dc= 5f6
meta-fsl-ppc : 59fc0c33d2de5db65af4c09c4d28fd78fa0f7b4f
poky : = eac61f37e36099f74485dab398b57f3812826d17


This is an automated m= essage from
The Yocto Project Autobuilder
Git: git://git.yoctoproject= .org/yocto-autobuilder
Email: elizabeth.flanagan@in= tel.com


------------------------------

Message: 2Date: Fri, 2 Oct 2015 14:43:37 +0300
From: Laurentiu Palcu <laurentiu.palcu@intel.com>
To: Gary Thomas <gary@mlbass= oc.com>
Cc: Yocto Project <yocto@yoctoproject.org= >
Subject: Re: [yocto] Safely cleaning 'downloads'
Message-ID: <= ;20151002114337.GG15509@lpalcu-desk>= ;
Content-Type: text/plain; charset=3Dus-ascii

Hi Garry,

I= t's probably a little late (I'm not reading the Yocto mailing lists
very= often now) but sometime ago I ran out of space myself and I wrote
this = script that I sent out on oe-core mailing list. It did the job for
me. F= or some reason it didn't make it in master but maybe you find it
useful.=

I didn't test it since then though. Maybe things changed, I don't k= now.
Give it a try if you wish. If you want to play safe, I recommend ma= king
a copy of your downloads directory (if you have space left). :)
=
http://lists.openembedded.org/piperm= ail/openembedded-core/2015-June/106026.html

laurentiu

On = Wed, Sep 30, 2015 at 06:13:39AM -0600, Gary Thomas wrote:
> Over time= , I tend to build in the same build tree many, many
> times.  Th= is leads to some really big trees as many things are
> duplicated, es= pecially in the 'downloads' directory.
>
> I use local mirrors= and hence my 'downloads' directory is
> _mostly_ populated with symb= olic links.  However, there are
> also expanded SCM packages, e.= g. git2/xxx
>
> How can I safely clean up the 'downloads' dire= ctory?  I already
> copy any created tarballs (I use BB_GENERATE= _MIRROR_TARBALLS=3D"1"
> to preclude unneeded downloads) to my mirror= , but I'd like to
> periodically clean out the whole directory (witho= ut disturbing
> my builds of course).  I've found out the hard w= ay that just
> emptying seems to be unsafe, at least for some recipes= like
> the [RaspberryPi] Linux kernel recipe which once built seems<= br>> to expect the expanded git2/xxx tree to remain.
>
> Ju= st trying to find ways to recover my lost GB...
>
> Thanks for= any ideas
>
> --
> -----------------------------------= -------------------------
> Gary Thomas        &n= bsp;       |  Consulting for the
> MLB Associate= s              |    Embedded w= orld
> ------------------------------------------------------------> --
> _______________________________________________
> = yocto mailing list
> yocto@yoctoproject.org
> htt= ps://lists.yoctoproject.org/listinfo/yocto


-----------------= -------------

Message: 3
Date: Fri, 2 Oct 2015 08:02:49 -0400
= From: Trevor Woerner <twoerner@gmail.com>
To: Karim ATIKI <= ;karim_atiki@hotmail.com>
Cc: "yocto@yoctopro= ject.org" <yocto@yoctoproject.org>
Subject: Re: [= yocto] [linux-yocto] [raspberryp2] Error during the
    b= uild of linux kernel
Message-ID: <560E7269.6090903@g= mail.com>
Content-Type: text/plain; charset=3Dwindows-1252
On 10/02/15 07:58, Karim ATIKI wrote:
> Hello Trevor,
>
>= ; Thanks for your feedback.
> You really think that "Fido" is an olde= r release ?

Sorry, I didn't mean to imply it was "old" and therefore= should be
avoided, I meant to point out that it was something that was = released
before the switch to gcc5 by default :-)

> Is the 1.9= release of Yocto stable enough yet ? And will this pb be
> fixed as = well ?

I think the next release will be 2.0. Whether or not it is st= able enough
is something you will have to evaluate for yourself :-) I'm = rather
certain this issue is already fixed in master, therefore it shoul= d be
available for the next release.

>
> Karim

Di= d you really mean to reply personally? I've re-CC'ed the list, hope
you = don't mind.


------------------------------

Message: 4
= Date: Fri, 2 Oct 2015 14:27:58 +0000 (UTC)
From: Edward Vidal <develone@sbcglobal.net>
To: "yocto@yoctoproject.org" <yocto@yoctoproject.org>
Subject: [yocto] wpa_sup= plicant on Raspberry Pi 2B
Message-ID:
    <1006153332.270433.1443796078701.JavaMail.yahoo@mail.yahoo.com><= br>Content-Type: text/plain; charset=3D"utf-8"

Hello all,I am using = a Wi-Pi wireless adapter.?
My image has the following packages installed= .
wpa-supplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon
wpa-supplicant-cli-= 2.4-r0.cortexa7hf_vfp_vfpv4_neon
wpa-supplicant-dev-2.4-r0.cortexa7hf_vf= p_vfpv4_neon
wpa-supplicant-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon
wpa-= supplicant-passphrase-2.4-r0.cortexa7hf_vfp_vfpv4_neon
Do I need any add= itional packages?
My wired eth0 works okay.
Which document has the mo= st current information on setting up wireless networking?From the informati= on at
http://trac.gateworks.com/wiki/Yocto/Wireless

I modi= fied my /etc/wpa_supplicant.conf as below without success.
ctrl_interfac= e=3D/var/run/wpa_supplicant
ctrl_interface_group=3D0
update_config=3D= 1

network=3D{
??????? scan_ssid=3D1
??????? ssid=3D"myssid"??????? psk=3D"mypsk"
??????? proto=3DWPA
??????? key_mgmt=3DWPA-PSK=
}Below is the results I get when I run iwconfig.
iwconfig
wlan0?= ??? IEEE 802.11bgn? ESSID:off/any?
????????? Mode:Managed? Access Point= : Not-Associated?? Tx-Power=3D0 dBm??
????????? Retry short limit:7?? R= TS thr:off?? Fragment thr:off
????????? Encryption key:off
????????? = Power Management:off
?????????
lo??????? no wireless extensions.
=
eth0????? no wireless extensions.
Thanks in advance.? Any help is ap= preciated.

Edward Vidal Jr. e-mail develone@sbcglobal.net<= /a> 915-595-1613
-------------- next part --------------
An HTML atta= chment was scrubbed...
URL: <http://lists.yoctoproject.org/pipermail/yocto/attachments/20151= 002/a3a81a97/attachment-0001.html>

--------------------------= ----

Message: 5
Date: Fri, 2 Oct 2015 10:56:37 -0400
From: Phi= lip Balister <philip@balister.org>
To: Edward Vidal <develone@sbcglobal.net>,    "yocto@yoc= toproject.org"
    <yocto@yoctoproject.or= g>
Subject: Re: [yocto] wpa_supplicant on Raspberry Pi 2B
Mess= age-ID: <560E9B25.5030303@balister.org>Content-Type: text/plain; charset=3Dwindows-1252

On 10/02/2015 10:2= 7 AM, Edward Vidal wrote:
> Hello all,I am using a Wi-Pi wireless ada= pter.
> My image has the following packages installed.
> wpa-s= upplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon
> wpa-supplicant-cli-2.4-r= 0.cortexa7hf_vfp_vfpv4_neon
> wpa-supplicant-dev-2.4-r0.cortexa7hf_vf= p_vfpv4_neon
> wpa-supplicant-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon> wpa-supplicant-passphrase-2.4-r0.cortexa7hf_vfp_vfpv4_neon
> Do= I need any additional packages?
> My wired eth0 works okay.
> = Which document has the most current information on setting up wireless netw= orking?From the information at
>  http://trac.gateworks.com/wi= ki/Yocto/Wireless
>
> I modified my /etc/wpa_supplicant.co= nf as below without success.
> ctrl_interface=3D/var/run/wpa_supplica= nt
> ctrl_interface_group=3D0
> update_config=3D1
>
<= br>Try modifying /etc/network/interfaces like this:

htt= ps://github.com/EttusResearch/meta-ettus/commit/da86e76d116798e386d073a1845= 3aabb6179a09a#diff-063964fa6e41065c7868b13b1b1644eaR11

it seems = wireless extensions are deprecated and you should use the
nl80211 driver= now.

Philip


> network=3D{
>     =   scan_ssid=3D1
>        ssid=3D"myssid"<= br>>        psk=3D"mypsk"
>    &nbs= p;   proto=3DWPA
>        key_mgmt=3DWPA-P= SK
> }Below is the results I get when I run iwconfig.
> iwconfi= g
> wlan0    IEEE 802.11bgn  ESSID:off/any  >          Mode:Managed  Access Point: N= ot-Associated  Tx-Power=3D0 dBm 
>      &= nbsp;   Retry short limit:7  RTS thr:off  Fragment thr:of= f
>          Encryption key:off
>&nbs= p;         Power Management:off
>    &= nbsp;    
> lo        no wireless ext= ensions.
>
> eth0      no wireless extensions.<= br>> Thanks in advance.  Any help is appreciated.
>
>&= nbsp; Edward Vidal Jr. e-mail develone@sbcglobal.net 915-595-1= 613
>
>
>


------------------------------
Message: 6
Date: Fri, 2 Oct 2015 12:08:28 -0300
From: "Daniel." = <danielhilst@gmail.com>
Cc: "yocto@yoctoprojec= t.org" <yocto@yoctoproject.org>
Subject: Re: [yoc= to] wpa_supplicant on Raspberry Pi 2B
Message-ID:
    = <CAF3SDA7kvgNsTB7RM_wZgDUkz5b8msv7r7=3D3B1kCHVq= R35aEbA@mail.gmail.com>
Content-Type: text/plain; charset=3DUTF-8=

What `wpa_cli stat' returns?

Regards,


2015-10-02 = 11:56 GMT-03:00 Philip Balister <philip@balister.org>:
>= On 10/02/2015 10:27 AM, Edward Vidal wrote:
>> Hello all,I am usi= ng a Wi-Pi wireless adapter.
>> My image has the following package= s installed.
>> wpa-supplicant-2.4-r0.cortexa7hf_vfp_vfpv4_neon>> wpa-supplicant-cli-2.4-r0.cortexa7hf_vfp_vfpv4_neon
>> w= pa-supplicant-dev-2.4-r0.cortexa7hf_vfp_vfpv4_neon
>> wpa-supplica= nt-doc-2.4-r0.cortexa7hf_vfp_vfpv4_neon
>> wpa-supplicant-passphra= se-2.4-r0.cortexa7hf_vfp_vfpv4_neon
>> Do I need any additional pa= ckages?
>> My wired eth0 works okay.
>> Which document ha= s the most current information on setting up wireless networking?From the i= nformation at
>>  http://trac.gateworks.com/wiki/Yocto/Wirel= ess
>>
>> I modified my /etc/wpa_supplicant.conf as b= elow without success.
>> ctrl_interface=3D/var/run/wpa_supplicant<= br>>> ctrl_interface_group=3D0
>> update_config=3D1
>&= gt;
>
> Try modifying /etc/network/interfaces like this:
>= ;
> https://github.com/EttusResearch/meta-ettus/commit/d= a86e76d116798e386d073a18453aabb6179a09a#diff-063964fa6e41065c7868b13b1b1644= eaR11
>
> it seems wireless extensions are deprecated and y= ou should use the
> nl80211 driver now.
>
> Philip
>= ;
>
>> network=3D{
>>        s= can_ssid=3D1
>>        ssid=3D"myssid"
>= ;>        psk=3D"mypsk"
>>    &n= bsp;   proto=3DWPA
>>        key_mgmt= =3DWPA-PSK
>> }Below is the results I get when I run iwconfig.
= >> iwconfig
>> wlan0    IEEE 802.11bgn  ESSI= D:off/any
>>          Mode:Managed = Access Point: Not-Associated  Tx-Power=3D0 dBm
>>  &nb= sp;       Retry short limit:7  RTS thr:off  Fra= gment thr:off
>>          Encryption key= :off
>>          Power Management:off>>
>> lo        no wireless extensions.=
>>
>> eth0      no wireless extensions.>> Thanks in advance.  Any help is appreciated.
>>>>  Edward Vidal Jr. e-mail develone@sbcglobal.net= 915-595-1613
>>
>>
>>
> --
> ______= _________________________________________
> yocto mailing list
>= ; yocto@yoctoproject.org
> https://lists.yoctoproject.o= rg/listinfo/yocto



--
"Do or do not. There is no try"=
  Yoda Master


------------------------------

-- =
_______________________________________________
yocto mailing listyocto@yoctoproject.org
https://lists.yoctoproject.org/li= stinfo/yocto


End of yocto Digest, Vol 61, Issue 8
*******= *****************************


------=_Part_323137_608180059.1443800072042--