From: Frediano Ziglio <fziglio@redhat.com>
To: kraxel@redhat.com, spice-devel@lists.freedesktop.org,
berrange@redhat.com
Cc: qemu-devel@nongnu.org
Subject: Re: [Qemu-devel] [PATCH v3] qxl: allow to specify head limit to qxl driver
Date: Mon, 13 Jul 2015 07:32:50 -0400 (EDT) [thread overview]
Message-ID: <719636739.29546882.1436787170682.JavaMail.zimbra@redhat.com> (raw)
In-Reply-To: <1436165798-635-1-git-send-email-fziglio@redhat.com>
Ping
----- Original Message -----
> From: "Frediano Ziglio" <fziglio@redhat.com>
> To: kraxel@redhat.com, spice-devel@lists.freedesktop.org, berrange@redhat.com
> Cc: qemu-devel@nongnu.org, "Frediano Ziglio" <fziglio@redhat.com>
> Sent: Monday, July 6, 2015 7:56:38 AM
> Subject: [Qemu-devel] [PATCH v3] qxl: allow to specify head limit to qxl driver
>
> This patch allow to limit number of heads using qxl driver. By default
> qxl driver is not limited on any kind on head use so can decide to use
> as much heads.
>
> libvirt has this as a video card parameter (actually set to 1 but not
> used). This parameter will allow to limit setting a use can do (which
> could be confusing).
>
> This patch rely on some change in spice-protocol which are not still
> accepted. See
> http://lists.freedesktop.org/archives/spice-devel/2015-June/020221.html.
>
> Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
> ---
> hw/display/qxl.c | 26 +++++++++++++++++++++-----
> hw/display/qxl.h | 3 +++
> 2 files changed, 24 insertions(+), 5 deletions(-)
>
> Changes from v2:
> - removed the RPC after spice-server upstream
> - rebased
>
> diff --git a/hw/display/qxl.c b/hw/display/qxl.c
> index f87a5ee..4e5ff69 100644
> --- a/hw/display/qxl.c
> +++ b/hw/display/qxl.c
> @@ -271,6 +271,12 @@ static void qxl_spice_monitors_config_async(PCIQXLDevice
> *qxl, int replay)
> QXL_COOKIE_TYPE_POST_LOAD_MONITORS_CONFIG,
> 0));
> } else {
> +#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
> + if (qxl->max_outputs) {
> + spice_qxl_set_monitors_config_limit(&qxl->ssd.qxl,
> + qxl->max_outputs);
> + }
> +#endif
> qxl->guest_monitors_config = qxl->ram->monitors_config;
> spice_qxl_monitors_config_async(&qxl->ssd.qxl,
> qxl->ram->monitors_config,
> @@ -991,6 +997,7 @@ static int interface_client_monitors_config(QXLInstance
> *sin,
> PCIQXLDevice *qxl = container_of(sin, PCIQXLDevice, ssd.qxl);
> QXLRom *rom = memory_region_get_ram_ptr(&qxl->rom_bar);
> int i;
> + unsigned max_outputs = ARRAY_SIZE(rom->client_monitors_config.heads);
>
> if (qxl->revision < 4) {
> trace_qxl_client_monitors_config_unsupported_by_device(qxl->id,
> @@ -1013,17 +1020,23 @@ static int
> interface_client_monitors_config(QXLInstance *sin,
> if (!monitors_config) {
> return 1;
> }
> +
> +#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
> + /* limit number of outputs based on setting limit */
> + if (qxl->max_outputs && qxl->max_outputs <= max_outputs) {
> + max_outputs = qxl->max_outputs;
> + }
> +#endif
> +
> memset(&rom->client_monitors_config, 0,
> sizeof(rom->client_monitors_config));
> rom->client_monitors_config.count = monitors_config->num_of_monitors;
> /* monitors_config->flags ignored */
> - if (rom->client_monitors_config.count >=
> - ARRAY_SIZE(rom->client_monitors_config.heads)) {
> + if (rom->client_monitors_config.count >= max_outputs) {
> trace_qxl_client_monitors_config_capped(qxl->id,
> monitors_config->num_of_monitors,
> -
> ARRAY_SIZE(rom->client_monitors_config.heads));
> - rom->client_monitors_config.count =
> - ARRAY_SIZE(rom->client_monitors_config.heads);
> + max_outputs);
> + rom->client_monitors_config.count = max_outputs;
> }
> for (i = 0 ; i < rom->client_monitors_config.count ; ++i) {
> VDAgentMonConfig *monitor = &monitors_config->monitors[i];
> @@ -2274,6 +2287,9 @@ static Property qxl_properties[] = {
> DEFINE_PROP_UINT32("vram64_size_mb", PCIQXLDevice, vram_size_mb,
> -1),
> DEFINE_PROP_UINT32("vgamem_mb", PCIQXLDevice, vgamem_size_mb, 16),
> DEFINE_PROP_INT32("surfaces", PCIQXLDevice, ssd.num_surfaces, 1024),
> +#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
> + DEFINE_PROP_UINT16("max_outputs", PCIQXLDevice, max_outputs, 0),
> +#endif
> DEFINE_PROP_END_OF_LIST(),
> };
>
> diff --git a/hw/display/qxl.h b/hw/display/qxl.h
> index deddd54..2ddf065 100644
> --- a/hw/display/qxl.h
> +++ b/hw/display/qxl.h
> @@ -99,6 +99,9 @@ typedef struct PCIQXLDevice {
> QXLModes *modes;
> uint32_t rom_size;
> MemoryRegion rom_bar;
> +#if SPICE_SERVER_VERSION >= 0x000c06 /* release 0.12.6 */
> + uint16_t max_outputs;
> +#endif
>
> /* vram pci bar */
> uint32_t vram_size;
> --
> 2.1.0
>
>
>
next prev parent reply other threads:[~2015-07-13 11:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-06 6:56 [Qemu-devel] [PATCH v3] qxl: allow to specify head limit to qxl driver Frediano Ziglio
2015-07-13 11:32 ` Frediano Ziglio [this message]
2015-07-14 13:41 ` Gerd Hoffmann
2015-07-14 14:13 ` Frediano Ziglio
2015-07-19 15:01 ` [Qemu-devel] [Spice-devel] " Pavel Grunt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=719636739.29546882.1436787170682.JavaMail.zimbra@redhat.com \
--to=fziglio@redhat.com \
--cc=berrange@redhat.com \
--cc=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=spice-devel@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.