From: alokc@codeaurora.org
To: Stephen Boyd <swboyd@chromium.org>
Cc: Wolfram Sang <wsa@the-dreams.de>,
linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org,
linux-arm-msm@vger.kernel.org,
Karthikeyan Ramasubramanian <kramasub@codeaurora.org>,
Sagar Dharia <sdharia@codeaurora.org>,
Girish Mahadevan <girishm@codeaurora.org>,
Doug Anderson <dianders@chromium.org>,
linux-i2c-owner@vger.kernel.org
Subject: Re: [PATCH v3 2/3] i2c: i2c-qcom-geni: Simplify tx/rx functions
Date: Thu, 04 Oct 2018 12:58:50 +0530 [thread overview]
Message-ID: <71abf26e927bce446cfd47ca9879444a@codeaurora.org> (raw)
In-Reply-To: <20180924235235.182649-2-swboyd@chromium.org>
On 2018-09-25 05:22, Stephen Boyd wrote:
> We never really look at the 'ret' local variable in these functions, so
> let's remove it to make way for shorter and simpler code. Furthermore,
> we can shorten some lines by adding two local variables for the SE and
> the message length so that everything fits in 80 columns and testing
> the
> 'dma_buf' local variable in lieu of the 'mode' local variable. And
> kernel style is to leave the return statement by itself, detached from
> the rest of the function.
>
> Cc: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
> Cc: Sagar Dharia <sdharia@codeaurora.org>
> Cc: Girish Mahadevan <girishm@codeaurora.org>
> Cc: Doug Anderson <dianders@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
changes looks more clean now.
Reviewed-by: Alok Chauhan <alokc@codeaurora.org>
> drivers/i2c/busses/i2c-qcom-geni.c | 79 ++++++++++++++----------------
> 1 file changed, 36 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c
> b/drivers/i2c/busses/i2c-qcom-geni.c
> index 9f2eb02481d3..0b466835cf40 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -365,29 +365,24 @@ static int geni_i2c_rx_one_msg(struct
> geni_i2c_dev *gi2c, struct i2c_msg *msg,
> u32 m_param)
> {
> dma_addr_t rx_dma;
> - enum geni_se_xfer_mode mode;
> - unsigned long time_left = XFER_TIMEOUT;
> + unsigned long time_left;
> void *dma_buf;
> + struct geni_se *se = &gi2c->se;
> + size_t len = msg->len;
>
> - gi2c->cur = msg;
> - mode = GENI_SE_FIFO;
> dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
> if (dma_buf)
> - mode = GENI_SE_DMA;
> -
> - geni_se_select_mode(&gi2c->se, mode);
> - writel_relaxed(msg->len, gi2c->se.base + SE_I2C_RX_TRANS_LEN);
> - geni_se_setup_m_cmd(&gi2c->se, I2C_READ, m_param);
> - if (mode == GENI_SE_DMA) {
> - int ret;
> -
> - ret = geni_se_rx_dma_prep(&gi2c->se, dma_buf, msg->len,
> - &rx_dma);
> - if (ret) {
> - mode = GENI_SE_FIFO;
> - geni_se_select_mode(&gi2c->se, mode);
> - i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
> - }
> + geni_se_select_mode(se, GENI_SE_DMA);
> + else
> + geni_se_select_mode(se, GENI_SE_FIFO);
> +
> + writel_relaxed(len, se->base + SE_I2C_RX_TRANS_LEN);
> + geni_se_setup_m_cmd(se, I2C_READ, m_param);
> +
> + if (dma_buf && geni_se_rx_dma_prep(se, dma_buf, len, &rx_dma)) {
> + geni_se_select_mode(se, GENI_SE_FIFO);
> + i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
> + dma_buf = NULL;
> }
>
> time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
> @@ -395,12 +390,13 @@ static int geni_i2c_rx_one_msg(struct
> geni_i2c_dev *gi2c, struct i2c_msg *msg,
> geni_i2c_abort_xfer(gi2c);
>
> gi2c->cur_rd = 0;
> - if (mode == GENI_SE_DMA) {
> + if (dma_buf) {
> if (gi2c->err)
> geni_i2c_rx_fsm_rst(gi2c);
> - geni_se_rx_dma_unprep(&gi2c->se, rx_dma, msg->len);
> + geni_se_rx_dma_unprep(se, rx_dma, len);
> i2c_put_dma_safe_msg_buf(dma_buf, msg, !gi2c->err);
> }
> +
> return gi2c->err;
> }
>
> @@ -408,45 +404,41 @@ static int geni_i2c_tx_one_msg(struct
> geni_i2c_dev *gi2c, struct i2c_msg *msg,
> u32 m_param)
> {
> dma_addr_t tx_dma;
> - enum geni_se_xfer_mode mode;
> unsigned long time_left;
> void *dma_buf;
> + struct geni_se *se = &gi2c->se;
> + size_t len = msg->len;
>
> - gi2c->cur = msg;
> - mode = GENI_SE_FIFO;
> dma_buf = i2c_get_dma_safe_msg_buf(msg, 32);
> if (dma_buf)
> - mode = GENI_SE_DMA;
> -
> - geni_se_select_mode(&gi2c->se, mode);
> - writel_relaxed(msg->len, gi2c->se.base + SE_I2C_TX_TRANS_LEN);
> - geni_se_setup_m_cmd(&gi2c->se, I2C_WRITE, m_param);
> - if (mode == GENI_SE_DMA) {
> - int ret;
> -
> - ret = geni_se_tx_dma_prep(&gi2c->se, dma_buf, msg->len,
> - &tx_dma);
> - if (ret) {
> - mode = GENI_SE_FIFO;
> - geni_se_select_mode(&gi2c->se, mode);
> - i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
> - }
> + geni_se_select_mode(se, GENI_SE_DMA);
> + else
> + geni_se_select_mode(se, GENI_SE_FIFO);
> +
> + writel_relaxed(len, se->base + SE_I2C_TX_TRANS_LEN);
> + geni_se_setup_m_cmd(se, I2C_WRITE, m_param);
> +
> + if (dma_buf && geni_se_tx_dma_prep(se, dma_buf, len, &tx_dma)) {
> + geni_se_select_mode(se, GENI_SE_FIFO);
> + i2c_put_dma_safe_msg_buf(dma_buf, msg, false);
> + dma_buf = NULL;
> }
>
> - if (mode == GENI_SE_FIFO) /* Get FIFO IRQ */
> - writel_relaxed(1, gi2c->se.base + SE_GENI_TX_WATERMARK_REG);
> + if (!dma_buf) /* Get FIFO IRQ */
> + writel_relaxed(1, se->base + SE_GENI_TX_WATERMARK_REG);
>
> time_left = wait_for_completion_timeout(&gi2c->done, XFER_TIMEOUT);
> if (!time_left)
> geni_i2c_abort_xfer(gi2c);
>
> gi2c->cur_wr = 0;
> - if (mode == GENI_SE_DMA) {
> + if (dma_buf) {
> if (gi2c->err)
> geni_i2c_tx_fsm_rst(gi2c);
> - geni_se_tx_dma_unprep(&gi2c->se, tx_dma, msg->len);
> + geni_se_tx_dma_unprep(se, tx_dma, len);
> i2c_put_dma_safe_msg_buf(dma_buf, msg, !gi2c->err);
> }
> +
> return gi2c->err;
> }
>
> @@ -474,6 +466,7 @@ static int geni_i2c_xfer(struct i2c_adapter *adap,
>
> m_param |= ((msgs[i].addr << SLV_ADDR_SHFT) & SLV_ADDR_MSK);
>
> + gi2c->cur = &msgs[i];
> if (msgs[i].flags & I2C_M_RD)
> ret = geni_i2c_rx_one_msg(gi2c, &msgs[i], m_param);
> else
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
Forum,a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2018-10-04 7:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-24 23:52 [PATCH v3 0/3] Fix qcom geni i2c DMA handling Stephen Boyd
2018-09-24 23:52 ` [PATCH v3 2/3] i2c: i2c-qcom-geni: Simplify tx/rx functions Stephen Boyd
2018-09-25 21:49 ` Doug Anderson
2018-10-04 7:28 ` alokc [this message]
2018-10-11 21:11 ` Wolfram Sang
2018-09-24 23:52 ` [PATCH v3 3/3] i2c: i2c-qcom-geni: Simplify irq handler Stephen Boyd
2018-09-25 21:49 ` Doug Anderson
2018-10-04 7:46 ` alokc
2018-10-11 21:11 ` Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=71abf26e927bce446cfd47ca9879444a@codeaurora.org \
--to=alokc@codeaurora.org \
--cc=dianders@chromium.org \
--cc=girishm@codeaurora.org \
--cc=kramasub@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c-owner@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sdharia@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.