Re: [PATCH 2/2] clk: qcom: Add TCSR clock driver for x1e80100

[Stephen Boyd <sboyd@kernel.org>]

Quoting Abel Vesa (2023-11-22 05:42:13)
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index ad1acd9b7426..6ed9c89d9070 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -1116,4 +1116,12 @@ config SM_VIDEOCC_8450
>           SM8450 devices.
>           Say Y if you want to support video devices and functionality such as
>           video encode/decode.
> +
> +config X1E_TCSRCC_80100

Is the config symbol intentionally namespaced for X1E prefix to group
one SoC? Why not X1E80100_TCSRCC then?

> +       tristate "X1E80100 TCSR Clock Controller"
> +       depends on ARM64 || COMPILE_TEST
> +       select QCOM_GDSC
> +       help
> +         Support for the TCSR clock controller on X1E80100 devices.
> +         Say Y if you want to use peripheral devices such as SD/UFS.
>  endif
> diff --git a/drivers/clk/qcom/tcsrcc-x1e80100.c b/drivers/clk/qcom/tcsrcc-x1e80100.c
> new file mode 100644
> index 000000000000..2ec142c3d1f9
> --- /dev/null
> +++ b/drivers/clk/qcom/tcsrcc-x1e80100.c
> @@ -0,0 +1,295 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
> + * Copyright (c) 2023, Linaro Limited
> + */
> +
> +#include <linux/clk-provider.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,x1e80100-tcsr.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-branch.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-regmap.h"
> +#include "clk-regmap-divider.h"
> +#include "clk-regmap-mux.h"
> +#include "common.h"
> +#include "reset.h"
> +
> +enum {
> +       DT_BI_TCXO_PAD,
> +};
> +
> +static struct clk_branch tcsr_edp_clkref_en = {
> +       .halt_reg = 0x15130,
> +       .halt_check = BRANCH_HALT_DELAY,
> +       .clkr = {
> +               .enable_reg = 0x15130,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(const struct clk_init_data) {
> +                       .name = "tcsr_edp_clkref_en",
> +                       .ops = &clk_branch2_ops,
> +               },
> +       },
> +};
> +
> +static struct clk_branch tcsr_pcie_2l_4_clkref_en = {
> +       .halt_reg = 0x15100,
> +       .halt_check = BRANCH_HALT_DELAY,

Why are these all branch halt delay but still have a halt_reg?

> +       .clkr = {
> +               .enable_reg = 0x15100,
> +               .enable_mask = BIT(0),
> +               .hw.init = &(struct clk_init_data){

const?

> +                       .name = "tcsr_pcie_2l_4_clkref_en",
> +                       .parent_data = &(const struct clk_parent_data){
> +                               .index = DT_BI_TCXO_PAD,
> +                       },