From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jaehoon Chung Date: Mon, 23 Nov 2020 13:26:39 +0900 Subject: [PATCH] power: regulator: Kconfig: add a dependency for POWER_SUPPORT for SPL In-Reply-To: <20201120041054.20083-1-nm@ti.com> References: <20201120041054.20083-1-nm@ti.com> Message-ID: <732e14e5-0778-fd6e-0388-e2418730a3c3@samsung.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/20/20 1:10 PM, Nishanth Menon wrote: > power/regulator will not be built if just CONFIG_SPL_DM_REGULATOR is > enabled. It needs CONFIG_SPL_POWER_SUPPORT to be enabled as well. > > For example, if we just need a GPIO regulator in SPL: > CONFIG_DM_REGULATOR=y > CONFIG_SPL_DM_REGULATOR=y > CONFIG_DM_REGULATOR_GPIO=y > CONFIG_SPL_DM_REGULATOR_GPIO=y > > Will not suffice, since the entire regulator build for SPL depends on > CONFIG_SPL_POWER_SUPPORT. Elaborate that information in the Kconfig > dependency. > > Signed-off-by: Nishanth Menon Reviewed-by: Jaehoon Chung Best Regards, Jaehoon Chung > --- > drivers/power/regulator/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig > index d431102462a8..fbbea18c7d1b 100644 > --- a/drivers/power/regulator/Kconfig > +++ b/drivers/power/regulator/Kconfig > @@ -18,7 +18,7 @@ config DM_REGULATOR > > config SPL_DM_REGULATOR > bool "Enable regulators for SPL" > - depends on DM_REGULATOR > + depends on DM_REGULATOR && SPL_POWER_SUPPORT > ---help--- > Regulators are seldom needed in SPL. Even if they are accessed, some > code space can be saved by accessing the PMIC registers directly. >