From: noreply@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0000377]: AudioTrak MAYA44 USB is detected, but doesn't work.
Date: Thu, 15 Jul 2004 13:41:03 +0200 [thread overview]
Message-ID: <7373aa386aea22b00172896d844f72d8@bugtrack.alsa-project.org> (raw)
A BUGNOTE has been added to this bug.
======================================================================
https://bugtrack.alsa-project.org/alsa-bug/bug_view_page.php?bug_id=0000377
======================================================================
Reported By: TheMuso
Assigned To: Clemens Ladisch
======================================================================
Project: ALSA - driver
Bug ID: 377
Category: USB - usb-audio
Reproducibility: always
Severity: feature
Priority: normal
Status: assigned
Distribution: Slackware 10.0
Kernel Version: 2.4.26 and 2.6.7
======================================================================
Date Submitted: 07-12-2004 05:56 CEST
Last Modified: 07-15-2004 13:41 CEST
======================================================================
Summary: AudioTrak MAYA44 USB is detected, but doesn't work.
Description:
With alsa-driver from latest CVS, this card is detected by hotplug, and
assigned to snd-usb-audio, however it is not detected and set up.
======================================================================
----------------------------------------------------------------------
Clemens Ladisch - 07-14-2004 19:27 CEST
----------------------------------------------------------------------
Does the device appear in /proc/asound/cards?
In the output of "aplay -l"?
----------------------------------------------------------------------
TheMuso - 07-15-2004 00:42 CEST
----------------------------------------------------------------------
# cat /proc/asound/cards
0 [I82801DBICH4 ]: ICH - Intel 82801DB-ICH4
Intel 82801DB-ICH4 at 0xc0000c00, irq 5
----------------------------------------------------------------------
Clemens Ladisch - 07-15-2004 08:59 CEST
----------------------------------------------------------------------
Please show the contents of /proc/bus/usb/devices and /etc/modules.conf,
/etc/modprobe.conf
----------------------------------------------------------------------
TheMuso - 07-15-2004 13:41 CEST
----------------------------------------------------------------------
Contents of /etc/modules.conf:
alias eth0 e100
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 1.0.5 ---
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
# --- END: Generated by ALSACONF, do not edit. ---
Contents of /etc/modprobe.conf:
alias eth0 e100
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 1.0.5 ---
alias char-major-116 snd
alias char-major-14 soundcore
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
# --- END: Generated by ALSACONF, do not edit. ---
Contents of /proc/bus/usb/devices:
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=1840
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 34/900 us ( 4%), #Int= 2, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=1820
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0557 ProdID=2004 Rev= 1.00
S: Manufacturer=ATEN
S: Product=UC100KM V2.10
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbkbd
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0a92 ProdID=0091 Rev= 1.00
S: Manufacturer=AUDIOTRAK
S: Product=MAYA44 USB
C:* #Ifs= 4 Cfg#= 1 Atr=00 MxPwr=250mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00
Driver=snd-usb-audio
I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00
Driver=snd-usb-audio
E: Ad=01(O) Atr=09(Isoc) MxPS= 384 Ivl=1ms
I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00
Driver=snd-usb-audio
I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00
Driver=snd-usb-audio
E: Ad=82(I) Atr=0d(Isoc) MxPS= 384 Ivl=1ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=1800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.26-ThinkPad ehci_hcd
S: Product=Intel Corp. 82801DB USB2
S: SerialNumber=00:1d.7
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
Bug History
Date Modified Username Field Change
======================================================================
07-12-04 05:56 TheMuso New Bug
07-12-04 05:56 TheMuso Distribution => Slackware 10.0
07-12-04 05:56 TheMuso Kernel Version => 2.4.26 and 2.6.7
07-14-04 19:27 Clemens LadischBugnote Added: 0001418
07-15-04 00:42 TheMuso Bugnote Added: 0001422
07-15-04 08:59 Clemens LadischBugnote Added: 0001424
07-15-04 13:41 TheMuso Bugnote Added: 0001432
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by BEA Weblogic Workshop
FREE Java Enterprise J2EE developer tools!
Get your free copy of BEA WebLogic Workshop 8.1 today.
http://ads.osdn.com/?ad_idG21&alloc_id\x10040&op=click
next reply other threads:[~2004-07-15 11:41 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-07-15 11:41 noreply [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-11-11 8:22 [ALSA - driver 0000377]: AudioTrak MAYA44 USB is detected, but doesn't work bugtrack
2004-11-11 8:22 bugtrack
2004-11-10 21:36 bugtrack
2004-11-14 12:20 ` Remi Bernhard
2004-11-10 12:49 bugtrack
2004-11-10 10:26 bugtrack
2004-11-10 8:56 bugtrack
2004-09-20 13:14 bugtrack
2004-09-03 1:42 bugtrack
2004-08-20 9:18 bugtrack
2004-08-15 10:14 bugtrack
2004-07-17 1:03 noreply
2004-07-16 14:59 noreply
2004-07-15 6:59 noreply
2004-07-14 22:42 noreply
2004-07-14 17:27 noreply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7373aa386aea22b00172896d844f72d8@bugtrack.alsa-project.org \
--to=noreply@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.