From: Krzysztof Kozlowski <krzk@kernel.org>
To: Nas Chung <nas.chung@chipsnmedia.com>,
mchehab@kernel.org, hverkuil@xs4all.nl,
sebastian.fricke@collabora.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org,
jackson.lee@chipsnmedia.com, lafley.kim@chipsnmedia.com
Subject: Re: [PATCH 4/8] media: chips-media: wave6: Add Wave6 codec driver
Date: Mon, 10 Feb 2025 18:40:44 +0100 [thread overview]
Message-ID: <7373c956-216a-43a6-939c-4a9be5564c57@kernel.org> (raw)
In-Reply-To: <20250210090725.4580-5-nas.chung@chipsnmedia.com>
On 10/02/2025 10:07, Nas Chung wrote:
> +
> + dev->debugfs = debugfs_lookup(WAVE6_VPU_DEBUGFS_DIR, NULL);
> + if (IS_ERR_OR_NULL(dev->debugfs))
> + dev->debugfs = debugfs_create_dir(WAVE6_VPU_DEBUGFS_DIR, NULL);
> +
> + pm_runtime_enable(&pdev->dev);
> +
> + if (dev->res->codec_types & WAVE6_IS_DEC) {
> + ret = wave6_vpu_dec_register_device(dev);
> + if (ret) {
> + dev_err(&pdev->dev, "wave6_vpu_dec_register_device fail: %d\n", ret);
> + goto err_temp_vbuf_free;
> + }
> + }
> + if (dev->res->codec_types & WAVE6_IS_ENC) {
> + ret = wave6_vpu_enc_register_device(dev);
> + if (ret) {
> + dev_err(&pdev->dev, "wave6_vpu_enc_register_device fail: %d\n", ret);
> + goto err_dec_unreg;
> + }
> + }
> +
> + if (dev->ctrl && wave6_vpu_ctrl_support_follower(dev->ctrl)) {
> + wave6_vpu_activate(dev);
> + ret = pm_runtime_resume_and_get(dev->dev);
> + if (ret)
> + goto err_enc_unreg;
> + }
> +
> + dev_dbg(&pdev->dev, "Added wave6 driver with caps %s %s\n",
> + dev->res->codec_types & WAVE6_IS_ENC ? "'ENCODE'" : "",
> + dev->res->codec_types & WAVE6_IS_DEC ? "'DECODE'" : "");
> +
> + return 0;
> +
> +err_enc_unreg:
> + if (dev->res->codec_types & WAVE6_IS_ENC)
> + wave6_vpu_enc_unregister_device(dev);
> +err_dec_unreg:
> + if (dev->res->codec_types & WAVE6_IS_DEC)
> + wave6_vpu_dec_unregister_device(dev);
> +err_temp_vbuf_free:
> + wave6_free_dma(&dev->temp_vbuf);
> +err_kfifo_free:
> + kfifo_free(&dev->irq_status);
> +err_m2m_dev_release:
> + wave6_vpu_release_m2m_dev(dev);
> +err_v4l2_unregister:
> + v4l2_device_unregister(&dev->v4l2_dev);
> +
> + return ret;
> +}
> +
> +static void wave6_vpu_remove(struct platform_device *pdev)
> +{
> + struct vpu_device *dev = dev_get_drvdata(&pdev->dev);
> +
> + if (dev->ctrl && wave6_vpu_ctrl_support_follower(dev->ctrl)) {
> + if (!pm_runtime_suspended(&pdev->dev))
> + pm_runtime_put_sync(&pdev->dev);
> + }
> + pm_runtime_disable(&pdev->dev);
> +
> + wave6_vpu_enc_unregister_device(dev);
> + wave6_vpu_dec_unregister_device(dev);
> + wave6_free_dma(&dev->temp_vbuf);
> + kfifo_free(&dev->irq_status);
> + wave6_vpu_release_m2m_dev(dev);
> + v4l2_device_unregister(&dev->v4l2_dev);
> +}
> +
> +#ifdef CONFIG_PM
> +static int wave6_vpu_runtime_suspend(struct device *dev)
> +{
> + struct vpu_device *vpu_dev = dev_get_drvdata(dev);
> +
> + if (!vpu_dev)
> + return -ENODEV;
> +
> + dprintk(dev, "runtime suspend\n");
Drop
> + if (vpu_dev->ctrl && vpu_dev->active)
> + wave6_vpu_ctrl_put_sync(vpu_dev->ctrl, &vpu_dev->entity);
> + if (vpu_dev->num_clks)
> + clk_bulk_disable_unprepare(vpu_dev->num_clks, vpu_dev->clks);
> +
> + return 0;
> +}
> +
> +static int wave6_vpu_runtime_resume(struct device *dev)
> +{
> + struct vpu_device *vpu_dev = dev_get_drvdata(dev);
> + int ret = 0;
> +
> + if (!vpu_dev)
> + return -ENODEV;
> +
> + dprintk(dev, "runtime resume\n");
Drop
> + if (vpu_dev->num_clks) {
> + ret = clk_bulk_prepare_enable(vpu_dev->num_clks, vpu_dev->clks);
> + if (ret) {
> + dev_err(dev, "failed to enable clocks: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + if (vpu_dev->ctrl && vpu_dev->active) {
> + ret = wave6_vpu_ctrl_resume_and_get(vpu_dev->ctrl, &vpu_dev->entity);
> + if (ret && vpu_dev->num_clks)
> + clk_bulk_disable_unprepare(vpu_dev->num_clks, vpu_dev->clks);
> + } else {
> + wave6_vpu_check_state(vpu_dev);
> + }
> +
> + return ret;
> +}
> +#endif
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int wave6_vpu_suspend(struct device *dev)
> +{
> + int ret;
> +
> + dprintk(dev, "suspend\n");
Drop. Don't re-implement existing tracing.
> + wave6_vpu_pause(dev, 0);
> +
> + ret = pm_runtime_force_suspend(dev);
> + if (ret)
> + wave6_vpu_pause(dev, 1);
> +
> + return ret;
> +}
> +
> +static int wave6_vpu_resume(struct device *dev)
> +{
> + int ret;
> +
> + dprintk(dev, "resume\n");
Drop, useless.
> + ret = pm_runtime_force_resume(dev);
> + if (ret)
> + return ret;
> +
> + wave6_vpu_pause(dev, 1);
> + return 0;
> +}
> +#endif
> +static const struct dev_pm_ops wave6_vpu_pm_ops = {
> + SET_RUNTIME_PM_OPS(wave6_vpu_runtime_suspend, wave6_vpu_runtime_resume, NULL)
> + SET_SYSTEM_SLEEP_PM_OPS(wave6_vpu_suspend, wave6_vpu_resume)
> +};
> +
> +static const struct of_device_id wave6_dt_ids[] = {
> + { .compatible = "nxp,imx95-wave633c", .data = &wave633c_data },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, wave6_dt_ids);
> +
> +static struct platform_driver wave6_vpu_driver = {
> + .driver = {
> + .name = VPU_PLATFORM_DEVICE_NAME,
> + .of_match_table = of_match_ptr(wave6_dt_ids),
Drop of_match_ptr, you have here warnings.
Best regards,
Krzysztof
next prev parent reply other threads:[~2025-02-10 17:50 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-10 9:07 [PATCH 0/8] Add support for Wave6 video codec driver Nas Chung
2025-02-10 9:07 ` [PATCH 1/8] media: platform: chips-media: wave5: Rename Kconfig parameter Nas Chung
2025-02-10 17:24 ` Krzysztof Kozlowski
2025-02-11 4:23 ` Nas Chung
2025-02-10 9:07 ` [PATCH 2/8] media: v4l2-common: Add YUV24 format info Nas Chung
2025-02-10 14:00 ` Sebastian Fricke
2025-02-11 1:58 ` Nas Chung
2025-02-10 9:07 ` [PATCH 3/8] dt-bindings: media: nxp: Add Wave6 video codec device Nas Chung
2025-02-10 17:30 ` Krzysztof Kozlowski
2025-02-13 7:50 ` Nas Chung
2025-02-13 8:49 ` Krzysztof Kozlowski
2025-02-18 9:21 ` Nas Chung
2025-02-19 12:31 ` Krzysztof Kozlowski
2025-02-20 7:35 ` Nas Chung
2025-02-20 8:32 ` Krzysztof Kozlowski
2025-02-21 8:29 ` Nas Chung
2025-02-10 9:07 ` [PATCH 4/8] media: chips-media: wave6: Add Wave6 codec driver Nas Chung
2025-02-10 17:40 ` Krzysztof Kozlowski [this message]
2025-02-11 8:28 ` Nas Chung
2025-02-10 9:07 ` [PATCH 5/8] media: chips-media: wave6: Add v4l2 m2m driver Nas Chung
2025-02-17 18:33 ` Nicolas Dufresne
2025-02-19 4:36 ` Nas Chung
2025-02-10 9:07 ` [PATCH 6/8] media: chips-media: wave6: Add Wave6 vpu interface Nas Chung
2025-02-28 8:33 ` [EXT] " Ming Qian
2025-02-10 9:07 ` [PATCH 7/8] media: chips-media: wave6: Add Wave6 control driver Nas Chung
2025-02-10 17:37 ` Krzysztof Kozlowski
2025-02-11 8:55 ` Nas Chung
2025-02-11 20:25 ` kernel test robot
2025-02-12 1:31 ` kernel test robot
2025-02-10 9:07 ` [PATCH 8/8] media: chips-media: wave6: Improve debugging capabilities Nas Chung
2025-02-11 16:43 ` kernel test robot
2025-02-10 13:05 ` [PATCH 0/8] Add support for Wave6 video codec driver Sebastian Fricke
2025-02-11 4:47 ` Nas Chung
2025-02-11 6:07 ` [EXT] " Ming Qian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7373c956-216a-43a6-939c-4a9be5564c57@kernel.org \
--to=krzk@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=jackson.lee@chipsnmedia.com \
--cc=krzk+dt@kernel.org \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nas.chung@chipsnmedia.com \
--cc=robh@kernel.org \
--cc=sebastian.fricke@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.