From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: Richard Weinberger <richard@nod.at>
Cc: linux-mtd@lists.infradead.org, Artem Bityutskiy <dedekind1@gmail.com>
Subject: Re: [BUG?] ubi.fm_autoconvert=1 on first boot
Date: Mon, 30 Jan 2017 10:23:23 +0100 [thread overview]
Message-ID: <73k29cgaus.fsf@pengutronix.de> (raw)
In-Reply-To: <6708b0f4-63e4-663f-794a-13b95f38a928@nod.at>
Hi Richard!
Richard Weinberger <richard@nod.at> writes:
> Steffen,
>
> Am 25.11.2016 um 14:51 schrieb Steffen Trumtrar:
>> [ 3.167543] ubi1: scanning is finished
>> [ 3.190860] ubi1 error: ubi_refill_pools: no free eraseblocks
>> [ 3.196670] ubi1 error: ubi_update_fastmap: could not find any anchor PEB
>> [ 3.203608] ubi1 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
>> [ 3.211299] ubi1 error: ubi_refill_pools: no free eraseblocks
>> [ 3.217082] ubi1 error: ubi_update_fastmap: could not find any anchor PEB
>> [ 3.223965] ubi1 warning: ubi_update_fastmap: Unable to write new fastmap, err=-28
>> [ 3.231632] ubi1 error: ubi_wl_get_peb: Unable to get a free PEB from user WL pool
>> [ 3.239320] ubi1 warning: ubi_eba_atomic_leb_change: switch to read-only mode
>> [ 3.246484] CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.0-rc6 #45
>> [ 3.255341] Hardware name: Freescale MXS (Device Tree)
>> [ 3.260616] [<c000ed60>] (unwind_backtrace) from [<c000d0a4>] (show_stack+0x10/0x14)
>> [ 3.268483] [<c000d0a4>] (show_stack) from [<c020d364>] (ubi_eba_atomic_leb_change+0x3c4/0x3e0)
>> [ 3.277232] [<c020d364>] (ubi_eba_atomic_leb_change) from [<c020470c>] (ubi_update_layout_vol+0x38/0x54)
>> [ 3.286826] [<c020470c>] (ubi_update_layout_vol) from [<c0204e00>] (ubi_change_vtbl_record+0x8c/0x110)
>> [ 3.296247] [<c0204e00>] (ubi_change_vtbl_record) from [<c0206a60>] (ubi_resize_volume+0x158/0x2e0)
>> [ 3.305406] [<c0206a60>] (ubi_resize_volume) from [<c02079f4>] (autoresize+0x68/0x130)
>> [ 3.313437] [<c02079f4>] (autoresize) from [<c0208518>] (ubi_attach_mtd_dev+0x4c4/0xd54)
>> [ 3.321641] [<c0208518>] (ubi_attach_mtd_dev) from [<c0452828>] (ubi_init+0x1bc/0x25c)
>> [ 3.329688] [<c0452828>] (ubi_init) from [<c0009594>] (do_one_initcall+0x3c/0x17c)
>> [ 3.337306] [<c0009594>] (do_one_initcall) from [<c0440cf0>] (kernel_init_freeable+0x108/0x1d0)
>> [ 3.346123] [<c0440cf0>] (kernel_init_freeable) from [<c0345a98>] (kernel_init+0x8/0xf8)
>> [ 3.354331] [<c0345a98>] (kernel_init) from [<c000a2d0>] (ret_from_fork+0x14/0x24)
>> [ 3.362017] ubi1 error: autoresize: cannot auto-resize volume 0
>> [ 3.369308] UBI error: cannot attach mtd8[ 3.373284] stmp3xxx-rtc 80056000.rtc: setting system clock to 1970-01-01 00:57:18 UTC (3438)
>> [ 3.382547] usb0_vbus: disabling
>> [ 3.386189] uart-pl011 80074000.serial: no DMA platform data
>> [ 3.394947] UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 40
>> [ 3.482996] UBIFS (ubi0:0): recovery needed
>> [ 3.739605] UBIFS (ubi0:0): recovery completed
>> [ 3.744224] UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "root"
>> [ 3.751583] UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
>> [ 3.761600] UBIFS (ubi0:0): FS size: 61837312 bytes (58 MiB, 487 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
>> [ 3.772122] UBIFS (ubi0:0): reserved for root: 0 bytes (0 KiB)
>> [ 3.778051] UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 79048B39-39D6-4BA2-89CF-8F2A0C699060, small LPT model
>> [ 3.791974] VFS: Mounted root (ubifs filesystem) on device 0:14.
>> [ 3.801380] devtmpfs: mounted
>> [ 3.805096] Freeing unused kernel memory: 144K (c0440000 - c0464000)
>> [ 3.811571] This architecture does not have kernel memory protection.
>> mounting filesystems...[ 4.463895] UBIFS error (pid: 44): cannot open "ubi1:data", error -19done.
>
> Can you please give the attached patch a try?
> It is untested since I cannot reproduce.
>
Thank you for the patch, I will get back to you once I found the time
to test it.
Thanks,
Steffen
--
Pengutronix e.K. | Steffen Trumtrar |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2017-01-30 9:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-25 11:34 [BUG?] ubi.fm_autoconvert=1 on first boot Steffen Trumtrar
2016-11-25 13:14 ` Richard Weinberger
2016-11-25 13:51 ` Steffen Trumtrar
2016-12-06 10:42 ` Steffen Trumtrar
2016-12-06 11:05 ` Richard Weinberger
2016-12-06 11:14 ` Steffen Trumtrar
2017-01-25 8:58 ` Richard Weinberger
2017-01-30 9:23 ` Steffen Trumtrar [this message]
2017-02-28 14:50 ` Sascha Hauer
2017-03-01 9:42 ` Sascha Hauer
2017-03-03 8:15 ` Richard Weinberger
2017-03-03 9:46 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=73k29cgaus.fsf@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=dedekind1@gmail.com \
--cc=linux-mtd@lists.infradead.org \
--cc=richard@nod.at \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.