Re: [V4 3/3] arm64: dts: qcom: sc7280: Add EPSS L3 interconnect provider

[okukatla@codeaurora.org]

On 2021-07-09 04:34, Stephen Boyd wrote:
> Quoting Odelu Kukatla (2021-06-18 04:28:54)
>> Add Epoch Subsystem (EPSS) L3 interconnect provider node on SC7280
>> SoCs.
>> 
>> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
>> ---
>>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 9 +++++++++
>>  1 file changed, 9 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> index 38a7f55..7690d7e 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
>> @@ -1153,6 +1153,15 @@
>>                         };
>>                 };
>> 
>> +               epss_l3: interconnect@18590000 {
>> +                       compatible = "qcom,sc7280-epss-l3";
>> +                       reg = <0 0x18590000 0 1000>, <0 0x18591000 0 
>> 0x100>,
>> +                               <0 0x18592000 0 0x100>, <0 0x18593000 
>> 0 0x100>;
>> +                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc 
>> GCC_GPLL0>;
>> +                       clock-names = "xo", "alternate";
>> +                       #interconnect-cells = <1>;
>> +               };
> 
> Is this inside the soc node? Because it should be but then the next 
> node
> is called 'interconnect' and has no address so that is probably outside
> the soc node. Please put nodes with a reg property like this into the
> soc node.
> 
no, will move this into soc node in v5.
>> +
>>                 clk_virt: interconnect {
>>                         compatible = "qcom,sc7280-clk-virt";
>>                         #interconnect-cells = <2>;