From: Ruth Fernandez <larrykathy3@verizon.net>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Geniatech x8000 thriller
Date: Sun, 2 Nov 2008 07:22:18 -0800 (PST) [thread overview]
Message-ID: <759163.14018.qm@web84101.mail.mud.yahoo.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 3994 bytes --]
I have a Geniatech x8000 thriller ATSC card. The only way Ubuntu will see it is with the ismod option in the etc/modprobe.d/option file. The ATSC part is not recognized. Plus there is no sound. Can you help. Larry -dmesg below
44.901324] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 44.901560] cx88[0]: subsystem: 14f1:1419, board: Geniatech X8000-MT DVBT [card=63,insmod option], frontend(s): 1
[ 44.901565] cx88[0]: TV tuner type 71, Radio tuner type 0
[ 44.981249] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 45.164340] tuner' 1-0061: chip found @ 0xc2 (cx88[0])
[ 45.681603] xc2028 1-0061: creating new instance
[ 45.681609] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 45.681618] cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw
[ 45.681631] cx88[0]/2: cx2388x 8802 Driver Manager
[ 45.681658] ACPI: PCI Interrupt 0000:00:0c.2[A] -> GSI 16 (level, low) -> IRQ 19
[ 45.681674] cx88[0]/2: found at 0000:00:0c.2, rev: 5, irq: 19, latency: 32, mmio: 0xf6000000
[ 45.681698] cx8802_probe() allocating 1 frontend(s)
[ 45.681904] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 19
[ 45.681916] cx88[0]/0: found at 0000:00:0c.0, rev: 5, irq: 19, latency: 32, mmio: 0xf4000000
[ 45.681985] cx88[0]/0: registered device video0 [v4l2]
[ 45.682018] cx88[0]/0: registered device vbi0
[ 45.682051] cx88[0]/0: registered device radio0
[ 45.768992] cx88_dvb: Unknown parameter `card'
[ 46.079711] NET: Registered protocol family 17
[ 47.330152] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 47.330337] cx88[0]: Calling XC2028/3028 callback
[ 47.530494] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 47.530502] cx88[0]: Calling XC2028/3028 callback
[ 49.042136] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 49.064305] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 49.099919] xc2028 1-0061: Incorrect readback of firmware version.
[ 49.158010] cx88[0]: Calling XC2028/3028 callback
[ 49.361081] xc2028 1-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 49.361089] cx88[0]: Calling XC2028/3028 callback
[ 50.860783] xc2028 1-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 50.882947] xc2028 1-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 50.966673] cx88[0]: Calling XC2028/3028 callback
[ 51.086790] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 20
[ 51.086954] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 52.489700] loop: module loaded
[ 52.514208] lp0: using parport0 (interrupt-driven).
[ 52.614795] Adding 6072528k swap on /dev/sdb5. Priority:-1 extents:1 across:6072528k
[ 53.177612] EXT3 FS on sdb1, internal journal
[ 53.741721] NET: Registered protocol family 10
[ 53.742225] lo: Disabled Privacy Extensions
[ 54.549762] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 55.028420] No dock devices found.
[ 56.643293] capifs: Rev 1.1.2.3
[ 58.230204] audit(1225633869.241:2): type=1503 operation="capable" name="sys_resource" pid=5164 profile="/usr/sbin/named" namespace="default"
[ 60.296371] apm: BIOS not found.
[ 60.865343] ppdev: user-space parallel port driver
[ 60.960941] audit(1225633871.973:3): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5421 profile="/usr/sbin/cupsd" namespace="default"
[ 63.502560] cx88[0]: Calling XC2028/3028 callback
[ 63.702671] xc2028 1-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.
[ 63.702681] cx88[0]: Calling XC2028/3028 callback
[ 63.767201] eth0: no IPv6 routers present
[ 65.190478] xc2028 1-0061: Loading firmware for type=FM (400), id 0000000000000000.
[-- Attachment #1.2: Type: text/html, Size: 4761 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-11-02 15:22 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-02 15:22 Ruth Fernandez [this message]
2008-11-09 4:19 ` [linux-dvb] Geniatech x8000 thriller CityK
[not found] <912472.64545.qm@web84108.mail.mud.yahoo.com>
2008-11-12 2:02 ` CityK
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=759163.14018.qm@web84101.mail.mud.yahoo.com \
--to=larrykathy3@verizon.net \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.