From: Christian Zigotzky <chzigotzky@xenosoft.de>
To: anpatel@nvidia.com, jkosina@suse.cz, linux-input@vger.kernel.org,
linuxppc-dev <linuxppc-dev@lists.ozlabs.org>,
Darren Stevens <darren@stevens-zone.net>,
"R.T.Dickinson" <rtd2@xtra.co.nz>,
linux-input@vger.kernel.org, mad skateman <madskateman@gmail.com>
Cc: Christian Zigotzky <info@xenosoft.de>
Subject: [PASEMI] Nemo board doesn't reboot anymore after the commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice"
Date: Fri, 6 Jan 2023 15:29:05 +0100 [thread overview]
Message-ID: <75f18191-c311-18f2-bfdb-ac82fb166e1b@xenosoft.de> (raw)
In-Reply-To: <747e3240-bb3f-3a0c-e998-02f3b4826704@xenosoft.de>
Hello,
The reboot issue is still present in the RC2 of kernel 6.2. We still
need the usbhid.patch. [1]
Please check the bad commit. [2]
Thanks,
Christian
[1] https://forum.hyperion-entertainment.com/viewtopic.php?p=56303#p56303
[2]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v6.1&id=f6d910a89a2391e5ce1f275d205023880a33d3f8
On 22 December 2022 at 11:42 am, Christian Zigotzky wrote:
> Hello,
>
> The Nemo board [1] doesn't reboot anymore since the final kernel 6.1.
> The reboot works with the RC8 of kernel 6.1.
> Actually, a reboot works but the CFE firmware is not loaded. Maybe
> there is still something in the memory after the reboot.
>
> I bisected today. [2]
>
> The commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice". [3] is
> the problem.
>
> I was able to revert this commit and the reboot works without any
> problems again.
>
> I created a patch for reverting the bad commit. [4]
>
> Then I compiled the kernel with this patch. After that, the X1000
> reboots without any problems.
>
> I use a Cherry USB mouse. [5]
>
> Please check the bad commit.
>
> Thanks,
> Christian
>
>
> [1] https://en.wikipedia.org/wiki/AmigaOne_X1000
> [2] https://forum.hyperion-entertainment.com/viewtopic.php?p=56303#p56303
> [3]
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?h=v6.1&id=f6d910a89a2391e5ce1f275d205023880a33d3f8
> [4] usbhid.patch:
>
> diff -rupN a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> --- a/drivers/hid/hid-ids.h 2022-12-22 10:24:06.842881276 +0100
> +++ b/drivers/hid/hid-ids.h 2022-12-22 10:23:35.903328869 +0100
> @@ -274,7 +274,6 @@
> #define USB_DEVICE_ID_CH_AXIS_295 0x001c
>
> #define USB_VENDOR_ID_CHERRY 0x046a
> -#define USB_DEVICE_ID_CHERRY_MOUSE_000C 0x000c
> #define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
> #define USB_DEVICE_ID_CHERRY_CYMOTION_SOLAR 0x0027
>
> @@ -919,7 +918,6 @@
> #define USB_DEVICE_ID_MS_XBOX_ONE_S_CONTROLLER 0x02fd
> #define USB_DEVICE_ID_MS_PIXART_MOUSE 0x00cb
> #define USB_DEVICE_ID_8BITDO_SN30_PRO_PLUS 0x02e0
> -#define USB_DEVICE_ID_MS_MOUSE_0783 0x0783
>
> #define USB_VENDOR_ID_MOJO 0x8282
> #define USB_DEVICE_ID_RETRO_ADAPTER 0x3201
> @@ -1388,7 +1386,6 @@
>
> #define USB_VENDOR_ID_PRIMAX 0x0461
> #define USB_DEVICE_ID_PRIMAX_MOUSE_4D22 0x4d22
> -#define USB_DEVICE_ID_PRIMAX_MOUSE_4E2A 0x4e2a
> #define USB_DEVICE_ID_PRIMAX_KEYBOARD 0x4e05
> #define USB_DEVICE_ID_PRIMAX_REZEL 0x4e72
> #define USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F 0x4d0f
> diff -rupN a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
> --- a/drivers/hid/hid-quirks.c 2022-12-22 10:24:06.844881247 +0100
> +++ b/drivers/hid/hid-quirks.c 2022-12-22 10:23:35.904328855 +0100
> @@ -54,7 +54,6 @@ static const struct hid_device_id hid_qu
> { HID_USB_DEVICE(USB_VENDOR_ID_CH,
> USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE), HID_QUIRK_NOGET },
> { HID_USB_DEVICE(USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS),
> HID_QUIRK_NOGET },
> { HID_USB_DEVICE(USB_VENDOR_ID_CH,
> USB_DEVICE_ID_CH_PRO_THROTTLE), HID_QUIRK_NOGET },
> - { HID_USB_DEVICE(USB_VENDOR_ID_CHERRY,
> USB_DEVICE_ID_CHERRY_MOUSE_000C), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR,
> USB_DEVICE_ID_CORSAIR_K65RGB), HID_QUIRK_NO_INIT_REPORTS },
> { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR,
> USB_DEVICE_ID_CORSAIR_K65RGB_RAPIDFIRE), HID_QUIRK_NO_INIT_REPORTS |
> HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR,
> USB_DEVICE_ID_CORSAIR_K70RGB), HID_QUIRK_NO_INIT_REPORTS },
> @@ -123,7 +122,6 @@ static const struct hid_device_id hid_qu
> { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_LOGITECH_MOUSE_C05A), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
> USB_DEVICE_ID_LOGITECH_MOUSE_C06A), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_MCS,
> USB_DEVICE_ID_MCS_GAMEPADBLOCK), HID_QUIRK_MULTI_INPUT },
> - { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_MOUSE_0783), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_PIXART_MOUSE), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_POWER_COVER), HID_QUIRK_NO_INIT_REPORTS },
> { HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT,
> USB_DEVICE_ID_MS_SURFACE3_COVER), HID_QUIRK_NO_INIT_REPORTS },
> @@ -148,7 +146,6 @@ static const struct hid_device_id hid_qu
> { HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
> USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN), HID_QUIRK_NO_INIT_REPORTS },
> { HID_USB_DEVICE(USB_VENDOR_ID_PIXART,
> USB_DEVICE_ID_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX,
> USB_DEVICE_ID_PRIMAX_MOUSE_4D22), HID_QUIRK_ALWAYS_POLL },
> - { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX,
> USB_DEVICE_ID_PRIMAX_MOUSE_4E2A), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX,
> USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D0F), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX,
> USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4D65), HID_QUIRK_ALWAYS_POLL },
> { HID_USB_DEVICE(USB_VENDOR_ID_PRIMAX,
> USB_DEVICE_ID_PRIMAX_PIXART_MOUSE_4E22), HID_QUIRK_ALWAYS_POLL },
>
> [5]
>
> Bus 003 Device 002: ID 046a:000c Cherry GmbH
> Couldn't open device, some information will be missing
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x046a Cherry GmbH
> idProduct 0x000c
> bcdDevice 8.10
> iManufacturer 0
> iProduct 0
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 0x0022
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xa0
> (Bus Powered)
> Remote Wakeup
> MaxPower 100mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3 Human Interface Device
> bInterfaceSubClass 1 Boot Interface Subclass
> bInterfaceProtocol 2 Mouse
> iInterface 0
> HID Device Descriptor:
> bLength 9
> bDescriptorType 33
> bcdHID 1.00
> bCountryCode 0 Not supported
> bNumDescriptors 1
> bDescriptorType 34 Report
> wDescriptorLength 52
> Report Descriptors:
> ** UNAVAILABLE **
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 10
>
next prev parent reply other threads:[~2023-01-06 14:33 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-22 10:42 [PASEMI] Nemo board doesn't reboot anymore after the commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice" Christian Zigotzky
2022-12-22 11:24 ` [PASEMI] Nemo board doesn't reboot anymore after the commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice" #forregzbot Thorsten Leemhuis
2023-01-30 15:21 ` Linux kernel regression tracking (#update)
2023-01-06 14:29 ` Christian Zigotzky [this message]
2023-01-06 14:41 ` [PASEMI] Nemo board doesn't reboot anymore after the commit "HID: usbhid: Add ALWAYS_POLL quirk for some mice" Jiri Kosina
2023-01-06 14:41 ` Jiri Kosina
2023-01-17 13:51 ` Christian Zigotzky
2023-01-17 13:51 ` Christian Zigotzky
2023-01-17 14:46 ` Jiri Kosina
2023-01-17 14:46 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=75f18191-c311-18f2-bfdb-ac82fb166e1b@xenosoft.de \
--to=chzigotzky@xenosoft.de \
--cc=anpatel@nvidia.com \
--cc=darren@stevens-zone.net \
--cc=info@xenosoft.de \
--cc=jkosina@suse.cz \
--cc=linux-input@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=madskateman@gmail.com \
--cc=rtd2@xtra.co.nz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.