From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Andrew Paprocki" Date: Mon, 07 Jul 2008 11:36:43 +0000 Subject: Re: [lm-sensors] [PATCH 2/4] hwmon: it87 only create pwm1-3 sysfs Message-Id: <76366b180807070436v1b9ec3cfu9984ecfbac979eac@mail.gmail.com> List-Id: References: <1215427211-6001-2-git-send-email-andrew@ishiboo.com> In-Reply-To: <1215427211-6001-2-git-send-email-andrew@ishiboo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Ah ok, for the pwm1_freq. I suppose this can be left out entirely, or should pwm1* always exist? It just seemed wrong to make pwm4/5 show up when needed but not the others. -Andrew On Mon, Jul 7, 2008 at 7:25 AM, Jean Delvare wrote: > On Mon, 7 Jul 2008 06:40:09 -0400, Andrew Paprocki wrote: >> This patch only creates the pwmN_enable, pwmN, and pwmN_freq >> sysfs interface files if the corresponding fanN is enabled by >> the chip. > > Nack. PWM1 may control fan2, etc. > > -- > Jean Delvare > > _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors