From: <bluetooth@allegro.yum.pl>
To: <linux-bluetooth@vger.kernel.org>
Subject: Problem with creating audio connection using Nokia Symbian devices
Date: Wed, 04 Jul 2012 10:23:23 +0200 [thread overview]
Message-ID: <7680ae91d9e0bc5286a7e7c8833efeae@localhost> (raw)
HI
I'm trying to connect my Nokia Symbian phone to computer in order to use
it as a headset (to stream music from phone to computer). Generally
procedure of connecting these devices is simple and generally works (I use
Pulse Audio sink/source), but I have problem with Nokia's phones.
Pairing is successful (using simple-pairing-agent that is included to the
Bluez deb package), but when I try to connect to audio service I get
message "Unable to connect". If I try to initiate an audio connection from
computer side then everything works great (eg.: dbus-send --system
--dest=org.bluez --print-reply --type=method_call /org/bluez/`pgrep
bluetooth`/hci0/dev_5C_57_C8_B5_62_E0 org.bluez.AudioSource.Connect).
I've tested it with following Nokia-made Symbian phones (bluez
4.98-2ubuntu7, 4.101-git20120704-1):
Nokia E52 081.003
Nokia E52 091.003
Nokia 601 Symbian Belle (S^3)
Nokia 701 Symbian Belle (S^3)
I've tested this on some another, non-Symbian devices, all works perfectly
(bluez 4.98-2ubuntu7):
HTC Nexus One Android 2.3.6 (2.6.35.7-ge0fb012htc-kernel@and18-2 #1)
BlackBerry 9520 BlackBerry v5.0.0.1010
Nokia Lumia 800
How can I fix this problem?
I've attached my syslog, my bluetoothd has been run with -d parameter.
Maybe I can provide more logs/debug messages, but I don't know where can I
find them and/or how to enable them.
My system: Linux 3.2.0-25-generic-pae #40-Ubuntu SMP Wed May 23 22:11:24
UTC 2012 i686 i686 i386 GNU/Linux
SYSLOG:
Jun 26 14:01:36 localhost bluetoothd[393]:
plugins/hciops.c:conn_complete() status 0x00
Jun 26 14:01:36 localhost bluetoothd[393]:
src/adapter.c:adapter_get_device() D8:75:33:B0:92:F3
Jun 26 14:01:36 localhost bluetoothd[393]:
plugins/hciops.c:remote_features_information() hci0 status 0
Jun 26 14:01:36 localhost bluetoothd[393]:
plugins/hciops.c:remote_name_information() hci0 status 0
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:link_key_request() hci0 dba D8:75:33:B0:92:F3
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:get_auth_info() hci0 dba D8:75:33:B0:92:F3
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:link_key_request() kernel auth requirements = 0x04
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:link_key_request() Matching key found
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:link_key_request() link key type 0x00
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:link_key_request() hci0 dba D8:75:33:B0:92:F3
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:get_auth_info() hci0 dba D8:75:33:B0:92:F3
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:link_key_request() kernel auth requirements = 0x04
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:link_key_request() Matching key found
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:link_key_request() link key type 0x00
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:auth_complete() hci0 status 0
Jun 26 14:01:37 localhost bluetoothd[393]:
plugins/hciops.c:bonding_complete() status 0x00
Jun 26 14:01:37 localhost bluetoothd[393]:
src/adapter.c:adapter_get_device() D8:75:33:B0:92:F3
Jun 26 14:01:37 localhost bluetoothd[393]:
src/device.c:device_bonding_complete() bonding (nil) status 0x00
Jun 26 14:01:37 localhost bluetoothd[393]:
src/device.c:device_probe_drivers() Probing drivers for D8:75:33:B0:92:F3
Jun 26 14:01:37 localhost bluetoothd[393]: audio/manager.c:handle_uuid()
Found Handsfree record
Jun 26 14:01:37 localhost bluetoothd[393]: audio/headset.c:headset_init()
Registered interface org.bluez.Headset on path
/org/bluez/393/hci0/dev_D8_75_33_B0_92_F3
Jun 26 14:01:37 localhost bluetoothd[393]:
audio/headset.c:headset_set_state() State changed
/org/bluez/393/hci0/dev_D8_75_33_B0_92_F3: HEADSET_STATE_DISCONNECTED ->
HEADSET_STATE_CONNECTING
Jun 26 14:01:37 localhost bluetoothd[393]:
audio/media.c:headset_state_changed()
Jun 26 14:01:37 localhost bluetoothd[393]:
audio/media.c:media_endpoint_async_call() Calling SetConfiguration: name =
:1.14 path = /MediaEndpoint/HFPAG
Jun 26 14:01:37 localhost bluetoothd[393]: src/agent.c:agent_authorize()
authorize request was sent for /org/bluez/393/hci0/dev_D8_75_33_B0_92_F3
Jun 26 14:01:37 localhost bluetoothd[393]:
audio/headset.c:headset_connect_cb()
/org/bluez/393/hci0/dev_D8_75_33_B0_92_F3: Connected to D8:75:33:B0:92:F3
Jun 26 14:01:57 localhost bluetoothd[393]: audio/headset.c:rfcomm_io_cb()
ERR or HUP on RFCOMM socket
Jun 26 14:01:57 localhost bluetoothd[393]:
audio/headset.c:headset_set_state() State changed
/org/bluez/393/hci0/dev_D8_75_33_B0_92_F3: HEADSET_STATE_CONNECTING ->
HEADSET_STATE_DISCONNECTED
Jun 26 14:01:57 localhost bluetoothd[393]:
audio/media.c:headset_state_changed()
Jun 26 14:01:57 localhost bluetoothd[393]:
audio/media.c:headset_state_changed() Clear endpoint 0x21fe9898
Jun 26 14:02:03 localhost bluetoothd[393]:
plugins/hciops.c:disconn_complete() handle 44 status 0x00
Jun 26 14:02:03 localhost bluetoothd[393]:
src/event.c:btd_event_disconn_complete()
Jun 26 14:02:03 localhost bluetoothd[393]:
src/adapter.c:adapter_remove_connection()
Tested with following USB dongles:
hci0: Type: BR/EDR Bus: USB
BD Address: 00:15:83:38:C4:06 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:3205570 acl:11046 sco:0 events:240 errors:0
TX bytes:3648 acl:112 sco:0 commands:79 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'nieserver-ivi'
Class: 0x4e0100
Service Classes: Networking, Rendering, Capturing, Telephony
Device Class: Computer, Uncategorized
HCI Version: 2.1 (0x4) Revision: 0x149c
LMP Version: 2.1 (0x4) Subversion: 0x149c
Manufacturer: Cambridge Silicon Radio (10)
hci1: Type: BR/EDR Bus: USB
BD Address: 00:1A:6B:FA:89:E4 ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:117167 acl:23 sco:0 events:6947 errors:0
TX bytes:2725 acl:23 sco:0 commands:215 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'pllzls056-0'
Class: 0x6e0100
Service Classes: Networking, Rendering, Capturing, Audio, Telephony
Device Class: Computer, Uncategorized
HCI Version: 2.0 (0x3) Revision: 0x10db
LMP Version: 2.0 (0x3) Subversion: 0x10db
Manufacturer: Cambridge Silicon Radio (10)
hci2: Type: BR/EDR Bus: USB
BD Address: 00:02:72:AE:5A:7C ACL MTU: 1021:8 SCO MTU: 64:1
UP RUNNING PSCAN
RX bytes:822 acl:0 sco:0 events:33 errors:0
TX bytes:637 acl:0 sco:0 commands:33 errors:0
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x87
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF PARK
Link mode: SLAVE ACCEPT
Name: 'pllzls056-1'
Class: 0x6e0100
Service Classes: Networking, Rendering, Capturing, Audio, Telephony
Device Class: Computer, Uncategorized
HCI Version: 3.0 (0x5) Revision: 0x0
LMP Version: 3.0 (0x5) Subversion: 0x4203
Manufacturer: Broadcom Corporation (15)
hci3: Type: BR/EDR Bus: USB
BD Address: 00:15:83:15:A3:10 ACL MTU: 672:3 SCO MTU: 128:2
UP RUNNING PSCAN
RX bytes:914 acl:0 sco:0 events:30 errors:0
TX bytes:360 acl:0 sco:0 commands:23 errors:0
Features: 0xff 0x3e 0x85 0x30 0x18 0x18 0x00 0x00
Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3
Link policy: RSWITCH HOLD SNIFF
Link mode: SLAVE ACCEPT
Name: 'pllzls056-1'
Class: 0x000208
Service Classes: Unspecified
Device Class: Phone, Cordless
HCI Version: 2.0 (0x3) Revision: 0xc5c
LMP Version: 2.0 (0x3) Subversion: 0xc5c
Manufacturer: Cambridge Silicon Radio (10)
reply other threads:[~2012-07-04 8:23 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7680ae91d9e0bc5286a7e7c8833efeae@localhost \
--to=bluetooth@allegro.yum.pl \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.