From: Sean Anderson <seanga2@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v5 13/33] pinctrl: Add support for Kendryte K210 FPIOA
Date: Wed, 4 Mar 2020 10:00:20 -0500 [thread overview]
Message-ID: <76ccc2f3-88b2-88ce-3228-e4e8d3ada231@gmail.com> (raw)
In-Reply-To: <CAN5B=eLXweWx9VgVOqwB00STbLXRUb4wXhqveUu07jfrY6z-EQ@mail.gmail.com>
On 3/4/20 1:47 AM, Rick Chen wrote:
> Hi Sean
>
>> The Fully-Programmable Input/Output Array (FPIOA) device controls pin
>> multiplexing on the K210. The FPIOA can remap any supported function to any
>> multifunctional IO pin. It can also perform basic GPIO functions, such as
>> reading the current value of a pin.
>>
>> Signed-off-by: Sean Anderson <seanga2@gmail.com>
>> ---
>>
>> Changes in v5:
>> - New
>>
>> MAINTAINERS | 2 +
>> .../pinctrl/kendryte,k210-fpioa.txt | 116 +++
>> drivers/pinctrl/Kconfig | 1 +
>> drivers/pinctrl/Makefile | 1 +
>> drivers/pinctrl/kendryte/Kconfig | 7 +
>> drivers/pinctrl/kendryte/Makefile | 1 +
>> drivers/pinctrl/kendryte/pinctrl.c | 663 ++++++++++++++++++
>> drivers/pinctrl/kendryte/pinctrl.h | 325 +++++++++
>> include/dt-bindings/pinctrl/k210-pinctrl.h | 12 +
>> 9 files changed, 1128 insertions(+)
>> create mode 100644 doc/device-tree-bindings/pinctrl/kendryte,k210-fpioa.txt
>> create mode 100644 drivers/pinctrl/kendryte/Kconfig
>> create mode 100644 drivers/pinctrl/kendryte/Makefile
>> create mode 100644 drivers/pinctrl/kendryte/pinctrl.c
>> create mode 100644 drivers/pinctrl/kendryte/pinctrl.h
>> create mode 100644 include/dt-bindings/pinctrl/k210-pinctrl.h
>>
>
> Please checkpatch and fix
>
> total: 3 errors, 13 warnings, 5 checks, 1147 lines checked
>
> Thanks
> Rick
Here is the output of checkpatch.
drivers/pinctrl/kendryte/pinctrl.c:25: error: space prohibited before open square bracket '['
This is from using macros in the style
#define FOO(x) [FOO_##x] = {\
...
}
I think this is more elegant than putting the [] on a separate line,
but it can of course be changed.
drivers/pinctrl/kendryte/pinctrl.c:76: check: Please use a blank line after function/struct/union/enum declarations
This is from using "local" macros, e.g.
#define FOO(x) FOO_##x
enum foo {
FOO(bar),
FOO(baz)
};
#undef FOO
I think keeping the undefinition of FOO close to where it is last used
aids readability. This can of course be changed (perhaps by moving the
(un)definition inside the enum).
drivers/pinctrl/kendryte/pinctrl.c:83: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:106: warning: Prefer 'unsigned int' to bare use of 'unsigned'
All these warnings are due to following the function definitions as
defined in pinctrl_ops.
drivers/pinctrl/kendryte/pinctrl.c:122: error: space prohibited before open square bracket '['
drivers/pinctrl/kendryte/pinctrl.c:133: check: Please use a blank line after function/struct/union/enum declarations
drivers/pinctrl/kendryte/pinctrl.c:141: error: space prohibited before open square bracket '['
drivers/pinctrl/kendryte/pinctrl.c:145: check: Please use a blank line after function/struct/union/enum declarations
drivers/pinctrl/kendryte/pinctrl.c:403: check: Please use a blank line after function/struct/union/enum declarations
drivers/pinctrl/kendryte/pinctrl.c:411: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:416: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:417: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:442: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:453: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:454: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:454: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:529: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:529: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:530: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/pinctrl/kendryte/pinctrl.c:612: warning: ENOSYS means 'invalid syscall nr' and nothing else
drivers/pinctrl/kendryte/pinctrl.h:281: check: Prefer using the BIT macro
This is from the line
#define K210_PC_DRIVE_1 (1 << K210_PC_DRIVE_SHIFT)
Where there are several succeeding and preceding lines which have
different values instead of 1.
--Sean
next prev parent reply other threads:[~2020-03-04 15:00 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-28 21:05 [PATCH v5 00/33] riscv: Add Sipeed Maix support Sean Anderson
2020-02-28 21:05 ` [PATCH v5 01/33] clk: Always use the supplied struct clk Sean Anderson
2020-02-28 21:05 ` [PATCH v5 02/33] clk: Check that ops of composite clock components exist before calling Sean Anderson
2020-02-28 21:05 ` [PATCH v5 03/33] clk: Unconditionally recursively en-/dis-able clocks Sean Anderson
2020-03-04 6:50 ` Rick Chen
2020-02-28 21:05 ` [PATCH v5 04/33] clk: Add functions to register CCF clock structs Sean Anderson
2020-02-28 21:05 ` [PATCH v5 05/33] clk: Add K210 pll support Sean Anderson
2020-02-28 21:05 ` [PATCH v5 06/33] clk: Add a bypass clock for K210 Sean Anderson
2020-02-28 21:05 ` [PATCH v5 07/33] clk: Add K210 clock support Sean Anderson
2020-03-04 6:58 ` Rick Chen
2020-03-04 14:54 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 08/33] doc: Fix typo in FIT documentation Sean Anderson
2020-03-02 2:21 ` Bin Meng
2020-02-28 21:05 ` [PATCH v5 09/33] dm: Add support for simple-pm-bus Sean Anderson
2020-02-28 21:05 ` [PATCH v5 10/33] dm: Fix error handling for dev_read_addr_ptr Sean Anderson
2020-03-02 2:22 ` Bin Meng
2020-03-02 19:46 ` Simon Glass
2020-02-28 21:05 ` [PATCH v5 11/33] reset: Add generic reset driver Sean Anderson
2020-02-28 21:05 ` [PATCH v5 12/33] lib: Always set errno in hcreate_r Sean Anderson
2020-03-02 2:24 ` Bin Meng
2020-02-28 21:05 ` [PATCH v5 13/33] pinctrl: Add support for Kendryte K210 FPIOA Sean Anderson
2020-03-04 6:47 ` Rick Chen
2020-03-04 15:00 ` Sean Anderson [this message]
2020-02-28 21:05 ` [PATCH v5 14/33] gpio: sifive: Use generic reg read function Sean Anderson
2020-03-02 2:24 ` Bin Meng
2020-02-28 21:05 ` [PATCH v5 15/33] gpio: dw: Fix warnings about casting int to pointer Sean Anderson
2020-03-02 2:27 ` Bin Meng
2020-03-02 3:50 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 16/33] gpio: dw: Add a trailing underscore to generated name Sean Anderson
2020-02-28 21:05 ` [PATCH v5 17/33] gpio: dw: Return output value when direction is out Sean Anderson
2020-02-28 21:05 ` [PATCH v5 18/33] led: gpio: Default to using node name if label is absent Sean Anderson
2020-02-28 21:05 ` [PATCH v5 19/33] spi: dw: Add device tree properties for fields in CTRL1 Sean Anderson
2020-03-04 6:15 ` Rick Chen
2020-03-04 15:01 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 20/33] spi: dw: Rename "cs-gpio" to "cs-gpios" Sean Anderson
2020-02-28 21:05 ` [PATCH v5 21/33] spi: dw: Use generic function to read reg address Sean Anderson
2020-02-28 21:05 ` [PATCH v5 22/33] spi: dw: Speed up transfer loops Sean Anderson
2020-02-28 21:05 ` [PATCH v5 23/33] spi: dw: Properly set rx_end when not recieving Sean Anderson
2020-02-29 17:47 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 24/33] spi: dw: Add mem_ops Sean Anderson
2020-02-28 21:05 ` [PATCH v5 25/33] wdt: Move asm/utils.h to log2.h Sean Anderson
2020-02-28 21:46 ` Marek Vasut
2020-02-28 22:43 ` Sean Anderson
2020-02-28 23:27 ` Marek Vasut
2020-03-03 6:58 ` Rick Chen
2020-03-03 14:11 ` Sean Anderson
2020-02-28 21:05 ` [PATCH v5 26/33] riscv: Add headers for asm/global_data.h Sean Anderson
2020-02-28 21:05 ` [PATCH v5 27/33] riscv: Fix race conditions when initializing IPI Sean Anderson
2020-03-02 9:08 ` Rick Chen
2020-03-02 15:43 ` Sean Anderson
2020-03-02 23:15 ` Lukas Auer
2020-03-03 8:27 ` Rick Chen
2020-03-05 2:18 ` Rick Chen
2020-03-02 23:17 ` Lukas Auer
2020-03-02 23:43 ` Sean Anderson
2020-03-03 21:53 ` Lukas Auer
2020-03-03 21:57 ` Sean Anderson
2020-03-04 15:25 ` Lukas Auer
2020-02-28 21:05 ` [PATCH v5 28/33] riscv: Add option to support RISC-V privileged spec 1.9 Sean Anderson
2020-03-04 6:20 ` Rick Chen
2020-02-28 21:05 ` [PATCH v5 29/33] riscv: Allow use of reset drivers Sean Anderson
2020-02-28 21:05 ` [PATCH v5 30/33] riscv: Try to get cpu frequency from a "clocks" node if it exists Sean Anderson
2020-02-28 21:05 ` [PATCH v5 31/33] riscv: Enable cpu clock if it is present Sean Anderson
2020-02-28 21:05 ` [PATCH v5 32/33] riscv: Add device tree for K210 and Sipeed Maix BitM Sean Anderson
2020-02-28 21:05 ` [PATCH v5 33/33] riscv: Add Sipeed Maix support Sean Anderson
2020-03-04 6:04 ` Rick Chen
2020-03-04 7:47 ` Rick Chen
2020-03-04 15:11 ` Sean Anderson
2020-03-05 3:40 ` Bin Meng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=76ccc2f3-88b2-88ce-3228-e4e8d3ada231@gmail.com \
--to=seanga2@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.