From: bugtrack@alsa-project.org
To: alsa-devel@alsa-project.org
Subject: [ALSA - driver 0001997]: No sound when using second pcm device
Date: Mon, 3 Apr 2006 11:59:33 +0200 [thread overview]
Message-ID: <77ce7b5ceaff44ccb31db57556568e59@bugtrack.alsa-project.org> (raw)
The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1997>
======================================================================
Reported By: prymitive
Assigned To: tiwai
======================================================================
Project: ALSA - driver
Issue ID: 1997
Category: PCI - atiixp
Reproducibility: always
Severity: minor
Priority: normal
Status: assigned
Distribution:
Kernel Version: 2.6.16-gentoo-r1
======================================================================
Date Submitted: 04-03-2006 11:59 CEST
Last Modified: 04-03-2006 11:59 CEST
======================================================================
Summary: No sound when using second pcm device
Description:
Hi there
I own an Acer 5024 notebook (AMD Turion / ATI chip based):
cer sub0 # lspci -v
00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, 66MHz, medium devsel, latency 64
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: c8000000-cfffffff
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:07.0 PCI bridge: ATI Technologies Inc Unknown device 5a39 (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Root Port (Slot-) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Capabilities: [b0] #0d [0000]
Capabilities: [b8] HyperTransport: MSI Mapping
Capabilities: [100] Advanced Error Reporting
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
(prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller
(prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
Controller (prog-if 20 [EHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: 66MHz, medium devsel
I/O ports at 8400 [size=16]
Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [b0] HyperTransport: MSI Mapping
00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE
Controller ATI (prog-if 8a [Master SecP PriP])
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 10
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 8410 [size=16]
Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, 66MHz, medium devsel, latency 0
00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if
01 [Subtractive decode])
Flags: bus master, 66MHz, medium devsel, latency 64
Bus: primary=00, secondary=06, subordinate=06, sec-latency=64
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: c0200000-c02fffff
Prefetchable memory behind bridge: 30000000-32ffffff
00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97
Audio Controller (rev 02)
Subsystem: Acer Incorporated [ALI] Unknown device 0079
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 11
Memory at c0003400 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller
(rev 02) (prog-if 00 [Generic])
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 11
Memory at c0003800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
Flags: fast devsel
Capabilities: [80] HyperTransport: Host or Secondary Interface
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
Flags: fast devsel
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
Flags: fast devsel
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
Flags: fast devsel
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility
X700 (PCIE) (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at c8000000 (32-bit, prefetchable) [size=128M]
I/O ports at 9000 [size=256]
Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [100] Advanced Error Reporting
06:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: AMBIT Microsystem Corp. Aspire 3022WLMi
Flags: bus master, fast devsel, latency 64, IRQ 10
Memory at c0204000 (32-bit, non-prefetchable) [size=8K]
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c020a000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=08, sec-latency=176
Memory window 0: 30000000-31fff000 (prefetchable)
Memory window 1: 34000000-35fff000 (prefetchable)
I/O window 0: 0000a400-0000a4ff
I/O window 1: 0000a800-0000a8ff
16-bit legacy interface ports at 0001
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394
Host Controller (prog-if 10 [OHCI])
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c0208000 (32-bit, non-prefetchable) [size=2K]
Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
FlashMedia Controller
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [44] Power Management version 2
06:06.4 Class 0805: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621,
PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller
Subsystem: Acer Incorporated [ALI] Unknown device 0080
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at c0209000 (32-bit, non-prefetchable) [size=256]
Memory at c0208c00 (32-bit, non-prefetchable) [size=256]
Memory at c0208800 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet (rev 10)
Subsystem: Acer Incorporated [ALI] Unknown device 0079
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
I/O ports at a000 [size=256]
Memory at c0209400 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 32000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
I'm running x86 Gentoo system and while using /dev/dsp under oss and
hw=0,0 under alsa everything is ok. But when I try to use second pcm
(/dev/dsp1 under oss emulation or hw=0,1 under alsa) I got no sound.
Running mplayer -ao oss:device=/dev/dsp1 gives me error "No souch device",
running
Running mplayer -ao alsa:device=hw=0.1 gives me:
[...]
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
alsa-init: 1 soundcard found, using: hw:0,1
alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little
Endian
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
[...]
device is opened but it freezes after that, no sound
I tried whith snd_atiixp ac97_clock=44100 but after inserting module with
this parameter mplayer opens hw=0.0 device with 44100 rate but hw=0.1
device is opened with 48000 rate
Is the second device any good for playing stuff? Maybe I shoud pass some
other parameters to the snd_atiixp module?
prymitive@acer ~/stuff/music $ lsmod
Module Size Used by
snd_atiixp 19212 3
fglrx 455084 7
snd_atiixp_modem 15944 0
snd_ac97_codec 90464 2 snd_atiixp,snd_atiixp_modem
snd_ac97_bus 2176 1 snd_ac97_codec
nsc_ircc 17980 0
irda 119352 1 nsc_ircc
crc_ccitt 2048 1 irda
======================================================================
Issue History
Date Modified Username Field Change
======================================================================
04-03-06 11:59 prymitive New Issue
04-03-06 11:59 prymitive Kernel Version => 2.6.16-gentoo-r1
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
next reply other threads:[~2006-04-03 9:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-03 9:59 bugtrack [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-04-03 10:21 [ALSA - driver 0001997]: No sound when using second pcm device bugtrack
2006-04-03 12:13 bugtrack
2006-04-03 12:40 bugtrack
2006-04-04 1:03 bugtrack
2006-04-04 2:54 bugtrack
2006-04-07 17:28 bugtrack
2006-04-07 17:28 bugtrack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=77ce7b5ceaff44ccb31db57556568e59@bugtrack.alsa-project.org \
--to=bugtrack@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.