Re: [PATCH V10] i2c: i2c-qcom-geni: Add shutdown callback for i2c

[rojay@codeaurora.org]

On 2021-05-20 13:45, Stephen Boyd wrote:
> Quoting rojay@codeaurora.org (2021-05-16 23:32:50)
>> Hi Stephen,
>> 
>> Now, I have made the changes, calling i2c_mark_adapter_suspended() in
>> shutdown() and i2c_mark_adapter_suspended()/_resumed() from runtime
>> suspend/resume also and validated the changes. I have also picked
>> your patch [1] for this validation.
>> 
>> During the device boot up I am seeing multiple traces shown below.
>> Are these expected now and needs to be fixed from rt5682/respective
>> client driver?
>> 
>> Trace1:
>> [   11.709477] i2c i2c-9: Transfer while suspended
>> [   11.905595] Call trace:
>> [   11.908124]  __i2c_transfer+0xb8/0x38c
>> [   11.911984]  i2c_transfer+0xa0/0xf4
>> [   11.915569]  i2c_transfer_buffer_flags+0x68/0x9c
>> [   11.920314]  regmap_i2c_write+0x34/0x64
>> [   11.924255]  _regmap_raw_write_impl+0x4e8/0x7bc
>> [   11.928911]  _regmap_bus_raw_write+0x70/0x8c
>> [   11.933301]  _regmap_write+0x100/0x150
>> [   11.937152]  regmap_write+0x54/0x78
>> [   11.940744]  soc_component_write_no_lock+0x34/0xa8
>> [   11.945666]  snd_soc_component_write+0x3c/0x5c
>> [   11.950242]  rt5682_set_component_pll+0x1e4/0x2b4 [snd_soc_rt5682]
>> [   11.956588]  snd_soc_component_set_pll+0x50/0xa8
>> [   11.961328]  snd_soc_dai_set_pll+0x74/0xc8
>> [   11.965542]  sc7180_snd_startup+0x9c/0x120 [snd_soc_sc7180]
>> [   11.971262]  snd_soc_link_startup+0x34/0x88
>> [   11.975557]  soc_pcm_open+0x100/0x538
>> [   11.979323]  snd_pcm_open_substream+0x530/0x704
>> [   11.983980]  snd_pcm_open+0xc8/0x210
>> [   11.987653]  snd_pcm_playback_open+0x50/0x80
>> [   11.992049]  snd_open+0x120/0x150
>> [   11.995462]  chrdev_open+0xb8/0x1a4
>> [   11.999056]  do_dentry_open+0x238/0x358
>> [   12.003001]  vfs_open+0x34/0x40
>> [   12.006235]  path_openat+0x9e8/0xd60
>> [   12.009913]  do_filp_open+0x90/0x10c
>> [   12.013587]  do_sys_open+0x148/0x314
>> [   12.017260]  __arm64_compat_sys_openat+0x28/0x34
>> [   12.022009]  el0_svc_common+0xa4/0x16c
>> [   12.025860]  el0_svc_compat_handler+0x2c/0x40
>> [   12.030337]  el0_svc_compat+0x8/0x10
>> [   12.034018] ---[ end trace 745ead557fcbb5dc ]---
> 
> Ah I see. Maybe it isn't correct to mark the device as suspended in
> runtime PM operations because the bus will be resumed during the
> transfer? So only mark it suspended during system wide suspend/resume
> transitions?
> 
> -Stephen
> 

Yes, we cannot mark device as suspended/resumed during
runtime PM operations. Bus will be resumed during i2c
transfers and before transfer initiation, in __i2c_transfer()
from i2c-core-base.c there is a check to see whether the device
is marked as suspended with "__i2c_check_suspended(adap)" call,
which is "true" in this case and returning from there.

To mark it only suspended during system wide suspend/resume
transitions, currently our geni i2c driver has only
system_suspend implemented (geni_i2c_suspend_noirq()) and
does not have system_resume implemented, which again causes i2c
transfers to fail during system_resume after system_suspend.

Shall I go ahead with marking device suspended during
shutdown() only?

-Roja

>> [   12.040151] rt5682 9-001a: ASoC: error at 
>> soc_component_write_no_lock
>> on rt5682.9-001a: -108
>> [   12.049055] rt5682 9-001a: ASoC: error at 
>> soc_component_write_no_lock
>> on rt5682.9-001a: -108
>> [   12.057742] rt5682 9-001a: ASoC: error at
>> snd_soc_component_update_bits on rt5682.9-001a: -108
>> 
>> Trace2:
>> [    3.515390] i2c i2c-2: Transfer while suspended
>> [    3.606749] Call trace:
>> [    3.606751]  __i2c_transfer+0xb8/0x38c
>> [    3.606752]  i2c_transfer+0xa0/0xf4
>> [    3.606754]  i2c_transfer_buffer_flags+0x68/0x9c
>> [    3.639599] hub 2-1.4:1.0: USB hub found
>> [    3.644375]  regmap_i2c_write+0x34/0x64
>> [    3.644376]  _regmap_raw_write_impl+0x4e8/0x7bc
>> [    3.644378]  _regmap_bus_raw_write+0x70/0x8c
>> [    3.644379]  _regmap_write+0x100/0x150
>> [    3.644381]  regmap_write+0x54/0x78
>> [    3.644383]  ti_sn_aux_transfer+0x90/0x244
>> [    3.650695] hub 2-1.4:1.0: 4 ports detected
>> [    3.655288]  drm_dp_dpcd_access+0x8c/0x11c
>> [    3.655289]  drm_dp_dpcd_read+0x64/0x10c
>> [    3.655290]  ti_sn_bridge_enable+0x5c/0x824
>> [    3.655292]  drm_atomic_bridge_chain_enable+0x78/0xa0
>> [    3.655294]  drm_atomic_helper_commit_modeset_enables+0x198/0x238
>> [    3.655295]  msm_atomic_commit_tail+0x324/0x714
>> [    3.655297]  commit_tail+0xa4/0x108
>> [    3.664985] usb 1-1.4: new high-speed USB device number 4 using
>> xhci-hcd
>> [    3.666204]  drm_atomic_helper_commit+0xf4/0xfc
>> [    3.666205]  drm_atomic_commit+0x50/0x5c
>> [    3.666206]  drm_atomic_helper_set_config+0x64/0x98
>> [    3.666208]  drm_mode_setcrtc+0x26c/0x590
>> [    3.666209]  drm_ioctl_kernel+0x9c/0x114
>> [    3.701074] hub 2-1.4:1.0: USB hub found
>> [    3.703347]  drm_ioctl+0x288/0x420
>> [    3.703349]  drm_compat_ioctl+0xd0/0xe0
>> [    3.703351]  __arm64_compat_sys_ioctl+0x100/0x2108
>> [    3.703354]  el0_svc_common+0xa4/0x16c
>> [    3.708499] hub 2-1.4:1.0: 4 ports detected
>> [    3.711588]  el0_svc_compat_handler+0x2c/0x40
>> [    3.711590]  el0_svc_compat+0x8/0x10
>> [    3.711591] ---[ end trace 745ead557fcbb5db ]---
>> [    3.772120] usb 1-1.4: New USB device found, idVendor=0bda,
>> idProduct=5411, bcdDevice= 1.04
>> [    3.794990] ti_sn65dsi86 2-002d: [drm:ti_sn_bridge_enable] *ERROR*
>> Can't read lane count (-108); assuming 4
>> 
>> [1]
>> https://lore.kernel.org/r/20210508075151.1626903-2-swboyd@chromium.org
>>