From: E Shattow <e@freeshell.de>
To: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>,
Rick Chen <rick@andestech.com>, Leo <ycliang@andestech.com>
Cc: Minda Chen <minda.chen@starfivetech.com>,
Hal Feng <hal.feng@starfivetech.com>,
Simon Glass <sjg@chromium.org>,
Yu-Chien Peter Lin <peter.lin@sifive.com>,
Sumit Garg <sumit.garg@linaro.org>,
"Leon M . Busch-George" <leon@georgemail.eu>,
Lukas Funke <lukas.funke@weidmueller.com>,
H Bell <dmoo_dv@protonmail.com>,
u-boot@lists.denx.de
Subject: Re: [PATCH v3 4/4] riscv: dts: starfive: remove duplicate itb entries
Date: Sat, 22 Feb 2025 17:36:26 -0800 [thread overview]
Message-ID: <7baa4904-16cc-4bde-9b7b-72a1f2899645@freeshell.de> (raw)
In-Reply-To: <20250221095856.36530-5-heinrich.schuchardt@canonical.com>
On 2/21/25 01:58, Heinrich Schuchardt wrote:
> As binman already creates nodes based on CONFIG_OF_LIST we don't need to
> add extra nodes.
>
> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> Reviewed-by: Simon Glass <sjg@chromium.org>
> Tested-by: Simon Glass <sjg@chromium.org> # StarFIve VisionFive 2
> ---
> v3:
> no change
> v2:
> no change
> ---
> .../dts/starfive-visionfive2-binman.dtsi | 76 -------------------
> 1 file changed, 76 deletions(-)
>
> diff --git a/arch/riscv/dts/starfive-visionfive2-binman.dtsi b/arch/riscv/dts/starfive-visionfive2-binman.dtsi
> index 4cce001e80d..05787bdb92d 100644
> --- a/arch/riscv/dts/starfive-visionfive2-binman.dtsi
> +++ b/arch/riscv/dts/starfive-visionfive2-binman.dtsi
> @@ -13,82 +13,6 @@
> };
>
> &binman {
> - itb {
> - fit {
> - images {
> - fdt-jh7110-milkv-mars {
> - description = "jh7110-milkv-mars";
> - load = <0x40400000>;
> - compression = "none";
> -
> - blob-ext {
> - filename = "dts/upstream/src/riscv/starfive/jh7110-milkv-mars.dtb";
> - };
> - };
> -
> - fdt-jh7110-pine64-star64 {
> - description = "jh7110-pine64-star64";
> - load = <0x40400000>;
> - compression = "none";
> -
> - blob-ext {
> - filename = "dts/upstream/src/riscv/starfive/jh7110-pine64-star64.dtb";
> - };
> - };
> -
> - fdt-jh7110-starfive-visionfive-2-v1.2a {
> - description = "jh7110-starfive-visionfive-2-v1.2a";
> - load = <0x40400000>;
> - compression = "none";
> -
> - blob-ext {
> - filename = "dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2-v1.2a.dtb";
> - };
> - };
> -
> - fdt-jh7110-starfive-visionfive-2-v1.3b {
> - description = "jh7110-starfive-visionfive-2-v1.3b";
> - load = <0x40400000>;
> - compression = "none";
> -
> - blob-ext {
> - filename = "dts/upstream/src/riscv/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb";
> - };
> - };
> - };
> -
> - configurations {
> - conf-jh7110-milkv-mars {
> - description = "jh7110-milkv-mars";
> - firmware = "opensbi";
> - loadables = "uboot";
> - fdt = "fdt-jh7110-milkv-mars";
> - };
> -
> - conf-jh7110-pine64-star64 {
> - description = "jh7110-pine64-star64";
> - firmware = "opensbi";
> - loadables = "uboot";
> - fdt = "fdt-jh7110-pine64-star64";
> - };
> -
> - conf-jh7110-starfive-visionfive-2-v1.2a {
> - description = "jh7110-starfive-visionfive-2-v1.2a";
> - firmware = "opensbi";
> - loadables = "uboot";
> - fdt = "fdt-jh7110-starfive-visionfive-2-v1.2a";
> - };
> -
> - conf-jh7110-starfive-visionfive-2-v1.3b {
> - description = "jh7110-starfive-visionfive-2-v1.3b";
> - firmware = "opensbi";
> - loadables = "uboot";
> - fdt = "fdt-jh7110-starfive-visionfive-2-v1.3b";
> - };
> - };
> - };
> - };
> -
> spl-img {
> filename = "spl/u-boot-spl.bin.normal.out";
>
Reviewed-by: E Shattow <e@freeshell.de>
prev parent reply other threads:[~2025-02-23 1:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-21 9:58 [PATCH v3 0/4] riscv: dts: starfive: simplify binman config Heinrich Schuchardt
2025-02-21 9:58 ` [PATCH v3 1/4] riscv: dts: add OF_LIST handling to binman.dtsi Heinrich Schuchardt
2025-02-22 22:05 ` E Shattow
2025-02-21 9:58 ` [PATCH v3 2/4] riscv: dts: no default configuration for MULTI_DTB_FIT Heinrich Schuchardt
2025-02-22 22:07 ` E Shattow
2025-02-21 9:58 ` [PATCH v3 3/4] board: starfive: spl: strip off 'starfive/' prefix Heinrich Schuchardt
2025-02-23 1:33 ` E Shattow
2025-02-23 12:55 ` Heinrich Schuchardt
2025-02-23 14:18 ` E Shattow
2025-02-23 15:39 ` Heinrich Schuchardt
2025-02-24 10:00 ` E Shattow
2025-02-24 10:13 ` Heinrich Schuchardt
2025-02-25 13:43 ` E Shattow
2025-02-21 9:58 ` [PATCH v3 4/4] riscv: dts: starfive: remove duplicate itb entries Heinrich Schuchardt
2025-02-23 1:36 ` E Shattow [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=7baa4904-16cc-4bde-9b7b-72a1f2899645@freeshell.de \
--to=e@freeshell.de \
--cc=dmoo_dv@protonmail.com \
--cc=hal.feng@starfivetech.com \
--cc=heinrich.schuchardt@canonical.com \
--cc=leon@georgemail.eu \
--cc=lukas.funke@weidmueller.com \
--cc=minda.chen@starfivetech.com \
--cc=peter.lin@sifive.com \
--cc=rick@andestech.com \
--cc=sjg@chromium.org \
--cc=sumit.garg@linaro.org \
--cc=u-boot@lists.denx.de \
--cc=ycliang@andestech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.