From mboxrd@z Thu Jan 1 00:00:00 1970 From: Niraj Tolia Subject: Re: RE: ANOUNCEMENT: Debian packages for xen built on 2004-08-19 bk source Date: Thu, 26 Aug 2004 12:53:21 +0100 Sender: xen-devel-admin@lists.sourceforge.net Message-ID: <7e45e2ac04082604534d2c9cf7@mail.gmail.com> References: , <1093509169.31864.15.camel@enigma.office.terrabox.com> <46FF460D-5E70-4D53-B739-C293DDB2347B@mimectl> Reply-To: Niraj Tolia Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <46FF460D-5E70-4D53-B739-C293DDB2347B@mimectl> Errors-To: xen-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: James Harper Cc: brianw@terrabox.com, Ian Pratt , Rik van Riel , xen-devel@lists.sourceforge.net List-Id: xen-devel@lists.xenproject.org James, Go here for help on how to get the linux-iscsi initiator to talk to the UNH target. You might also need to apply the attached patch at to the UNH target to get it to work with the Cisco initiator. I managed to get the UNH and linux-iscsi (3.4.3) initiators to talk to the UNH target. I ran the initiators both under Xen and on vanilla Linux. However this was with a 2.4 kernel. Also, any particular reason for running the targets under Xen? Niraj ----- Original Message ----- From: James Harper Date: Thu, 26 Aug 2004 21:14:39 +1000 Subject: RE: [Xen-devel] ANOUNCEMENT: Debian packages for xen built on 2004-08-19 bk source To: brianw@terrabox.com, Ian Pratt Cc: Rik van Riel , xen-devel@lists.sourceforge.net I tried a combination 'iSCSI Enterprise Target' (http://sourceforge.net/projects/iscsitarget/) (v0.2.6 but i think 0.3.0 is out now) + 'Linux-iSCSI Project' (http://linux-iscsi.sourceforge.net/). Unfortunately, after finally getting network booting working I found I was getting massive and almost immediate filesystem corruption. Both are running under xen which places a rather large number of variables into the equation, so I have no idea what is causing what. I'm now battling with unh-iscsi (http://unh-iscsi.sourceforge.net/) which provides a target and an initiator, but looks like it needs a bit of hand holding to get running (changes to .h files to modify config, no init scripts, clumsy admin tools). It does support linux 2.6 though. If I can get it working, i'll be trying the Linux-iSCSI initiator against the unh-iscsi target tonight. James ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285