From mboxrd@z Thu Jan 1 00:00:00 1970 From: khilman@baylibre.com (Kevin Hilman) Date: Wed, 07 Sep 2016 13:06:27 -0700 Subject: [PATCH v2 0/3] eMMC, SD-card and ethernet support for Vega S95 boards In-Reply-To: <20160904182903.1841-1-martin.blumenstingl@googlemail.com> (Martin Blumenstingl's message of "Sun, 4 Sep 2016 20:29:00 +0200") References: <20160815133811.19646-1-martin.blumenstingl@googlemail.com> <20160904182903.1841-1-martin.blumenstingl@googlemail.com> Message-ID: <7h37lbtqyk.fsf@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Hi Marrtin, Martin Blumenstingl writes: > This adds support for the internal eMMC, the SD-card slot and ethernet on > all Tronsmart S95 Vega boards. > There are some S95 Vega Meta clones out there where the bootloader does > not configure the ethernet registers correctly, leading to non-working > ethernet. This will be fixed in a separate series. Boards which are not > suffering from broken bootloaders have fully working ethernet. > > Changes since v1: > - rebased after latest updates which added the IR decoder to > meson-gxbb-vega-s95.dtsi > > Changes since the RFC: > - added eMMC support > - renamed fixed 3V3 regulator so it can be re-used for eMMC > > > Martin Blumenstingl (3): > ARM64: dts: amlogic: SD card support for all Tronsmart Vega S95 > devices > ARM64: dts: amlogic: eMMC support for all Tronsmart Vega S95 devices > ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices I've applied the ethernet one, but I'm going to wait on the SD/eMMC patches until the driver is finalized for the other one. Thanks, Kevin From mboxrd@z Thu Jan 1 00:00:00 1970 From: Kevin Hilman Subject: Re: [PATCH v2 0/3] eMMC, SD-card and ethernet support for Vega S95 boards Date: Wed, 07 Sep 2016 13:06:27 -0700 Message-ID: <7h37lbtqyk.fsf@baylibre.com> References: <20160815133811.19646-1-martin.blumenstingl@googlemail.com> <20160904182903.1841-1-martin.blumenstingl@googlemail.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20160904182903.1841-1-martin.blumenstingl-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org> (Martin Blumenstingl's message of "Sun, 4 Sep 2016 20:29:00 +0200") Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Martin Blumenstingl Cc: linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org, will.deacon-5wv7dgnIgG8@public.gmane.org, catalin.marinas-5wv7dgnIgG8@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, afaerber-l3A5Bk7waGM@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Marrtin, Martin Blumenstingl writes: > This adds support for the internal eMMC, the SD-card slot and ethernet on > all Tronsmart S95 Vega boards. > There are some S95 Vega Meta clones out there where the bootloader does > not configure the ethernet registers correctly, leading to non-working > ethernet. This will be fixed in a separate series. Boards which are not > suffering from broken bootloaders have fully working ethernet. > > Changes since v1: > - rebased after latest updates which added the IR decoder to > meson-gxbb-vega-s95.dtsi > > Changes since the RFC: > - added eMMC support > - renamed fixed 3V3 regulator so it can be re-used for eMMC > > > Martin Blumenstingl (3): > ARM64: dts: amlogic: SD card support for all Tronsmart Vega S95 > devices > ARM64: dts: amlogic: eMMC support for all Tronsmart Vega S95 devices > ARM64: dts: amlogic: enable ethernet on all Tronsmart Vega S95 devices I've applied the ethernet one, but I'm going to wait on the SD/eMMC patches until the driver is finalized for the other one. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html