[PATCH v9 2/2] arm-soc: Add support for tango4 platforms

[khilman@kernel.org (Kevin Hilman)]

Marc Gonzalez <marc_gonzalez@sigmadesigns.com> writes:

> Add support for Sigma Designs ARM-based Tango4 "Secure Media Processor"
> platforms (i.e. smp8734, smp8756, smp8758, smp8759) built around the
> Cortex-A9 MPCore r3p0 (all dual-core, except the 8756).
>
> Support for older MIPS-based platforms can be found elsewhere:
> https://github.com/mansr/linux-tangox
>
> Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
> ---
>  arch/arm/Kconfig              |  2 ++
>  arch/arm/Makefile             |  1 +
>  arch/arm/mach-tangox/Kconfig  | 12 ++++++++++++
>  arch/arm/mach-tangox/Makefile |  2 ++
>  arch/arm/mach-tangox/setup.c  | 32 ++++++++++++++++++++++++++++++++
>  arch/arm/mach-tangox/smc.S    |  9 +++++++++
>  arch/arm/mach-tangox/smc.h    |  5 +++++

Potential bike-shed fodder, but, a dumb question: is the family name
actually "tangox" or is the "x" for the number (tango3, tango4, etc.)

Assuming it's the later based on usage throughout the patch, I think
it'd be better to just use "tango" throughout instead of tangox.

Also a MAINTAINERS file entry is appropriate for this new platform
support (as scripts/checkpatch.pl should have told you.)

Kevin