diff for duplicates of <7hoag797gk.fsf@deeprootsystems.com> diff --git a/a/1.txt b/N1/1.txt index efaa46c..5a5879a 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -16,3 +16,8 @@ exynos_defconfig. I booted it on my arndale, and I still don't see the networking come up. Full boot log attached. Kevin + +-------------- next part -------------- +An embedded and charset-unspecified text was scrubbed... +Name: boot-arndale.txt +URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151009/2c313ab4/attachment-0001.txt> diff --git a/a/2.hdr b/a/2.hdr deleted file mode 100644 index bee6d6d..0000000 --- a/a/2.hdr +++ /dev/null @@ -1,2 +0,0 @@ -Content-Type: text/plain -Content-Disposition: inline; filename=boot-arndale.txt diff --git a/a/2.txt b/a/2.txt deleted file mode 100644 index 169d3e3..0000000 --- a/a/2.txt +++ /dev/null @@ -1,435 +0,0 @@ -Connected to arndale console [channel connected] (~$quit to exit) -(user:khilman) is already connected - - -# PYBOOT: console: connected. -~$hardreset - -Command(arndale console)> hardreset -(user:khilman) Reboot arndale - - -U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250 - -CPU:Exynos5250@1000MHz - -Board: for ARNDALE5250 -I2C: ready -DRAM: 2 GiB -WARNING: Caches not enabled - -Checking Boot Mode ... SDMMC -MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1, EXYNOS DWMMC: 2 -In: serial -Out: serial -Err: serial -Net: No ethernet found. -(Re)start USB... -USB0: USB EHCI 1.00 -scanning bus 0 for devices... 4 USB Device(s) found - scanning usb for storage devices... 0 Storage Device(s) found - scanning usb for ethernet devices... 1 Ethernet Device(s) found -Hit any key to stop autoboot: - -# PYBOOT: u-boot: taking control. - 3 0 -ARNDALE5250 # -ARNDALE5250 # version -version - -U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250 -arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2 -GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919 -ARNDALE5250 # setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 -setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 -ARNDALE5250 # setenv netargs 'setenv bootargs ${bootargs} "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.3"' -setenv netargs 'setenv bootargs ${bootargs} "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.3"' -ARNDALE5250 # if test -n ${initenv}; then run initenv; fi -if test -n ${initenv}; then run initenv; fi -ARNDALE5250 # if test -n ${preboot}; then run preboot; fi -if test -n ${preboot}; then run preboot; fi -(Re)start USB... -USB0: USB EHCI 1.00 -scanning bus 0 for devices... 4 USB Device(s) found - scanning usb for storage devices... 0 Storage Device(s) found - scanning usb for ethernet devices... 1 Ethernet Device(s) found -ARNDALE5250 # setenv autoload no; setenv autoboot no -setenv autoload no; setenv autoboot no -ARNDALE5250 #dhcp - dhcp -Waiting for Ethernet connection... done. -BOOTP broadcast 1 -DHCP client bound to address 192.168.1.167 -ARNDALE5250 #setenv serverip 192.168.1.2 - setenv serverip 192.168.1.2 -ARNDALE5250 # if test -n ${netargs}; then run netargs; fi -if test -n ${netargs}; then run netargs; fi -ARNDALE5250 # tftp 0x41000000 192.168.1.2:tmp/arndale-o13inu/zImage -tftp 0x41000000 192.168.1.2:tmp/arndale-o13inu/zImage -Waiting for Ethernet connection... done. -Using asx0 device -TFTP from server 192.168.1.2; our IP address is 192.168.1.167 -Filename 'tmp/arndale-o13inu/zImage'. -Load address: 0x41000000 -Loading: *################################################################# - ################################################################# - ################################################################# - ################################################################# - ########################### -done -Bytes transferred = 4209056 (4039a0 hex) -ARNDALE5250 # tftp 0x42000000 192.168.1.2:tmp/arndale-o13inu/initrd-vFFjKf.cpio.gz -tftp 0x42000000 192.168.1.2:tmp/arndale-o13inu/initrd-vFFjKf.cpio.gz -Waiting for Ethernet connection... done. -Using asx0 device -TFTP from server 192.168.1.2; our IP address is 192.168.1.167 -Filename 'tmp/arndale-o13inu/initrd-vFFjKf.cpio.gz'. -Load address: 0x42000000 -Loading: *################################################################# - ################################################################# - ################################################################# - ################################################################# - ################################################################# - ################ -done -Bytes transferred = 5001043 (4c4f53 hex) -ARNDALE5250 #tftp 0x41f00000 192.168.1.2:tmp/arndale-o13inu/tmp_2g_yE.dtb - tftp 0x41f00000 192.168.1.2:tmp/arndale-o13inu/tmp_2g_yE.dtb -Waiting for Ethernet connection... done. -Using asx0 device -TFTP from server 192.168.1.2; our IP address is 192.168.1.167 -Filename 'tmp/arndale-o13inu/tmp_2g_yE.dtb'. -Load address: 0x41f00000 -Loading: *### -done -Bytes transferred = 42207 (a4df hex) -ARNDALE5250 # printenv bootargs -printenv bootargs -bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.3 -ARNDALE5250 #bootz 0x41000000 - 0x41f00000 - -# PYBOOT: u-boot: jumping to kernel image - bootz 0x41000000 - 0x41f00000 -## Flattened Device Tree blob at 41f00000 - Booting using the fdt blob at 0x41f00000 - Using Device Tree in place at 41f00000, end 41f0d4de - -Starting kernel ... - -[ 0.000000] Booting Linux on physical CPU 0x0 -[ 0.000000] Linux version 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 (khilman@paris) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #15 SMP PREEMPT Fri Oct 9 11:32:11 PDT 2015 -[ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d -[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache -[ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 -[ 0.000000] cma: Reserved 64 MiB at 0xbc000000 -[ 0.000000] Memory policy: Data cache writealloc -[ 0.000000] Samsung CPU ID: 0x43520010 -[ 0.000000] PERCPU: Embedded 12 pages/cpu @eefaa000 s18880 r8192 d22080 u49152 -[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518656 -[ 0.000000] Kernel command line: console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.3 -[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) -[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) -[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) -[ 0.000000] Memory: 1984248K/2080768K available (5642K kernel code, 238K rwdata, 2020K rodata, 424K init, 315K bss, 30984K reserved, 65536K cma-reserved, 1245184K highmem) -[ 0.000000] Virtual kernel memory layout: -[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) -[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) -[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) -[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) -[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) -[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) -[ 0.000000] .text : 0xc0008000 - 0xc0783e2c (7664 kB) -[ 0.000000] .init : 0xc0784000 - 0xc07ee000 ( 424 kB) -[ 0.000000] .data : 0xc07ee000 - 0xc0829ac0 ( 239 kB) -[ 0.000000] .bss : 0xc082c000 - 0xc087ac98 ( 316 kB) -[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 -[ 0.000000] Preemptible hierarchical RCU implementation. -[ 0.000000] Build-time adjustment of leaf fanout to 32. -[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. -[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 -[ 0.000000] NR_IRQS:16 nr_irqs:16 16 -[ 0.000000] GIC physical location is 0x10481000 -[ 0.000000] L2C: failed to init: -19 -[ 0.000000] Exynos5250: clock setup completed, armclk=1000000000 -[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). -[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns -[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns -[ 0.000000] Switching to timer-based delay loop, resolution 41ns -[ 0.000005] Ignoring duplicate/late registration of read_current_timer delay -[ 0.000019] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns -[ 0.000036] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns -[ 0.000500] Console: colour dummy device 80x30 -[ 0.001021] console [tty0] enabled -[ 0.001050] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000) -[ 0.001088] pid_max: default: 32768 minimum: 301 -[ 0.001255] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) -[ 0.001279] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) -[ 0.001883] CPU: Testing write buffer coherency: ok -[ 0.002098] CPU0: update cpu_capacity 1024 -[ 0.002120] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 -[ 0.002237] Setting up static identity map for 0x40008280 - 0x400082d8 -[ 0.045354] CPU1: update cpu_capacity 1024 -[ 0.045359] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 -[ 0.045430] Brought up 2 CPUs -[ 0.045476] SMP: Total of 2 processors activated (96.00 BogoMIPS). -[ 0.045493] CPU: All CPU(s) started in HYP mode. -[ 0.045509] CPU: Virtualization extensions available. -[ 0.046537] devtmpfs: initialized -[ 0.062748] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 -[ 0.063475] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns -[ 0.064645] pinctrl core: initialized pinctrl subsystem -[ 0.065743] NET: Registered protocol family 16 -[ 0.066740] DMA: preallocated 256 KiB pool for atomic coherent allocations -[ 0.080285] cpuidle: using governor ladder -[ 0.095321] cpuidle: using governor menu -[ 0.100126] exynos-audss-clk 3810000.audss-clock-controller: setup completed -[ 0.167935] SCSI subsystem initialized -[ 0.168227] usbcore: registered new interface driver usbfs -[ 0.168314] usbcore: registered new interface driver hub -[ 0.169201] usbcore: registered new device driver usb -[ 0.170046] s3c-i2c 12c60000.i2c: slave address 0x66 -[ 0.170072] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz -[ 0.491736] VDD_33ON_2.8V: Failed to create debugfs directory -[ 0.647588] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter -[ 0.647751] s3c-i2c 12c80000.i2c: slave address 0x50 -[ 0.647775] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz -[ 0.648150] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter -[ 0.648290] s3c-i2c 12c90000.i2c: slave address 0x00 -[ 0.648314] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz -[ 0.648662] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter -[ 0.648761] s3c-i2c 12ce0000.i2c: slave address 0x38 -[ 0.648783] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz -[ 0.649129] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter -[ 0.649236] s3c-i2c 121d0000.i2c: slave address 0x38 -[ 0.649258] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz -[ 0.649552] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter -[ 0.650097] s2mps11-clk s5m8767-clk: could not find clock sub-node -[ 0.650130] s2mps11-clk: probe of s5m8767-clk failed with error -22 -[ 0.650516] Advanced Linux Sound Architecture Driver Initialized. -[ 0.652521] clocksource: Switched to clocksource arch_sys_counter -[ 0.664490] NET: Registered protocol family 2 -[ 0.664944] TCP established hash table entries: 8192 (order: 3, 32768 bytes) -[ 0.665041] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) -[ 0.665217] TCP: Hash tables configured (established 8192 bind 8192) -[ 0.665277] UDP hash table entries: 512 (order: 2, 24576 bytes) -[ 0.665327] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) -[ 0.665506] NET: Registered protocol family 1 -[ 0.665771] RPC: Registered named UNIX socket transport module. -[ 0.665793] RPC: Registered udp transport module. -[ 0.665809] RPC: Registered tcp transport module. -[ 0.665824] RPC: Registered tcp NFSv4.1 backchannel transport module. -[ 0.666024] Trying to unpack rootfs image as initramfs... -[ 0.938249] Freeing initrd memory: 4884K (c2000000 - c24c5000) -[ 0.939603] futex hash table entries: 512 (order: 3, 32768 bytes) -[ 0.952560] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. -[ 0.953717] bounce: pool size: 64 pages -[ 0.953745] io scheduler noop registered -[ 0.953770] io scheduler deadline registered -[ 0.954005] io scheduler cfq registered (default) -[ 0.956204] 12100000.phy supply vbus not found, using dummy regulator -[ 0.956293] 12100000.phy supply vbus-boost not found, using dummy regulator -[ 0.961350] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330 -[ 0.961381] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 -[ 0.964976] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330 -[ 0.965004] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 -[ 0.966057] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330 -[ 0.966084] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 -[ 0.967115] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-241330 -[ 0.967140] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 -[ 1.041727] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled -[ 1.043705] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 56, base_baud = 0) is a S3C6400/10 -[ 1.044148] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 57, base_baud = 0) is a S3C6400/10 -[ 1.044549] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 58, base_baud = 0) is a S3C6400/10 -[ 1.804319] console [ttySAC2] enabled -[ 1.808353] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10 -[ 1.818298] [drm] Initialized drm 1.1.0 20060810 -[ 1.822549] of_graph_get_next_endpoint(): no port node found in /dp-controller@145B0000 -[ 1.839670] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops) -[ 1.846168] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops) -[ 1.853287] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops) -[ 1.860856] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops) -[ 1.867943] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). -[ 1.874528] [drm] No driver support for vblank timestamp query. -[ 1.892099] Division by zero in kernel. -[ 1.892108] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 #15 -[ 1.892110] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) -[ 1.892131] [<c001554c>] (unwind_backtrace) from [<c00122e0>] (show_stack+0x10/0x14) -[ 1.892145] [<c00122e0>] (show_stack) from [<c01f19b0>] (dump_stack+0x70/0xbc) -[ 1.892157] [<c01f19b0>] (dump_stack) from [<c01f04f4>] (Ldiv0+0x8/0x10) -[ 1.892168] [<c01f04f4>] (Ldiv0) from [<c02a672c>] (fimd_commit+0x1f0/0x2b0) -[ 1.892178] [<c02a672c>] (fimd_commit) from [<c02a4000>] (exynos_drm_crtc_enable+0x1c/0x28) -[ 1.892189] [<c02a4000>] (exynos_drm_crtc_enable) from [<c027f658>] (drm_atomic_helper_commit_modeset_enables+0x94/0x190) -[ 1.892200] [<c027f658>] (drm_atomic_helper_commit_modeset_enables) from [<c02a3ac0>] (exynos_atomic_commit_complete+0x2c/0x1c4) -[ 1.892209] [<c02a3ac0>] (exynos_atomic_commit_complete) from [<c02a3e94>] (exynos_atomic_commit+0x17c/0x1c4) -[ 1.892219] [<c02a3e94>] (exynos_atomic_commit) from [<c02a0e90>] (drm_atomic_commit+0x40/0x64) -[ 1.892229] [<c02a0e90>] (drm_atomic_commit) from [<c0281cf4>] (restore_fbdev_mode+0x2c8/0x2ec) -[ 1.892240] [<c0281cf4>] (restore_fbdev_mode) from [<c0282c44>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x2c/0x74) -[ 1.892249] [<c0282c44>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0282cb8>] (drm_fb_helper_set_par+0x2c/0x54) -[ 1.892259] [<c0282cb8>] (drm_fb_helper_set_par) from [<c0228fe0>] (fbcon_init+0x47c/0x4e4) -[ 1.892268] [<c0228fe0>] (fbcon_init) from [<c025fc20>] (visual_init+0xb4/0x100) -[ 1.892277] [<c025fc20>] (visual_init) from [<c0261bd8>] (do_bind_con_driver+0x134/0x350) -[ 1.892286] [<c0261bd8>] (do_bind_con_driver) from [<c0261f64>] (do_take_over_console+0x170/0x1d8) -[ 1.892295] [<c0261f64>] (do_take_over_console) from [<c02290ac>] (do_fbcon_takeover+0x64/0xcc) -[ 1.892305] [<c02290ac>] (do_fbcon_takeover) from [<c003ce7c>] (notifier_call_chain+0x44/0x84) -[ 1.892315] [<c003ce7c>] (notifier_call_chain) from [<c003d08c>] (__blocking_notifier_call_chain+0x48/0x60) -[ 1.892324] [<c003d08c>] (__blocking_notifier_call_chain) from [<c003d0bc>] (blocking_notifier_call_chain+0x18/0x20) -[ 1.892334] [<c003d0bc>] (blocking_notifier_call_chain) from [<c022e5e4>] (register_framebuffer+0x184/0x268) -[ 1.892345] [<c022e5e4>] (register_framebuffer) from [<c0283850>] (drm_fb_helper_initial_config+0x24c/0x3fc) -[ 1.892354] [<c0283850>] (drm_fb_helper_initial_config) from [<c02a4754>] (exynos_drm_fbdev_init+0xec/0x14c) -[ 1.892362] [<c02a4754>] (exynos_drm_fbdev_init) from [<c02789ac>] (drm_kms_helper_hotplug_event+0x24/0x28) -[ 1.892370] [<c02789ac>] (drm_kms_helper_hotplug_event) from [<c02791fc>] (drm_helper_hpd_irq_event+0xd0/0x158) -[ 1.892377] [<c02791fc>] (drm_helper_hpd_irq_event) from [<c02a38c0>] (exynos_drm_load+0x140/0x15c) -[ 1.892385] [<c02a38c0>] (exynos_drm_load) from [<c028bfc4>] (drm_dev_register+0xa0/0xb4) -[ 1.892394] [<c028bfc4>] (drm_dev_register) from [<c028d950>] (drm_platform_init+0x40/0xd0) -[ 1.892403] [<c028d950>] (drm_platform_init) from [<c02b61d0>] (try_to_bring_up_master.part.0+0xcc/0x108) -[ 1.892412] [<c02b61d0>] (try_to_bring_up_master.part.0) from [<c02b62b4>] (component_master_add_with_match+0xa8/0x124) -[ 1.892420] [<c02b62b4>] (component_master_add_with_match) from [<c02a399c>] (exynos_drm_platform_probe+0xc0/0xdc) -[ 1.892429] [<c02a399c>] (exynos_drm_platform_probe) from [<c02bb9cc>] (platform_drv_probe+0x50/0xac) -[ 1.892436] [<c02bb9cc>] (platform_drv_probe) from [<c02ba43c>] (driver_probe_device+0x1e0/0x2a0) -[ 1.892443] [<c02ba43c>] (driver_probe_device) from [<c02ba588>] (__driver_attach+0x8c/0x90) -[ 1.892451] [<c02ba588>] (__driver_attach) from [<c02b8b58>] (bus_for_each_dev+0x54/0x88) -[ 1.892461] [<c02b8b58>] (bus_for_each_dev) from [<c02b9b1c>] (bus_add_driver+0xe8/0x1f4) -[ 1.892469] [<c02b9b1c>] (bus_add_driver) from [<c02bad54>] (driver_register+0x78/0xf4) -[ 1.892477] [<c02bad54>] (driver_register) from [<c02a3a50>] (exynos_drm_register_drivers+0x24/0x68) -[ 1.892484] [<c02a3a50>] (exynos_drm_register_drivers) from [<c02a3ce4>] (exynos_drm_init+0x88/0xbc) -[ 1.892492] [<c02a3ce4>] (exynos_drm_init) from [<c0009748>] (do_one_initcall+0x84/0x1d4) -[ 1.892534] [<c0009748>] (do_one_initcall) from [<c0784d94>] (kernel_init_freeable+0x11c/0x1e8) -[ 1.892545] [<c0784d94>] (kernel_init_freeable) from [<c0553968>] (kernel_init+0x8/0xec) -[ 1.892554] [<c0553968>] (kernel_init) from [<c000f7b8>] (ret_from_fork+0x14/0x3c) -[ 1.895349] exynos-dp 145b0000.dp-controller: failed to get hpd plug status -[ 1.977198] Console: switching to colour frame buffer device 365x114 -[ 2.471635] exynos-drm exynos-drm: fb0: frame buffer device -[ 2.487526] [drm] Initialized exynos 1.0.0 20110530 on minor 0 -[ 2.508940] brd: module loaded -[ 2.546839] loop: module loaded -[ 2.549502] usbcore: registered new interface driver r8152 -[ 2.554136] usbcore: registered new interface driver asix -[ 2.559482] usbcore: registered new interface driver ax88179_178a -[ 2.565570] usbcore: registered new interface driver cdc_ether -[ 2.571395] usbcore: registered new interface driver smsc75xx -[ 2.577131] usbcore: registered new interface driver smsc95xx -[ 2.582841] usbcore: registered new interface driver net1080 -[ 2.588478] usbcore: registered new interface driver cdc_subset -[ 2.594376] usbcore: registered new interface driver zaurus -[ 2.599967] usbcore: registered new interface driver cdc_ncm -[ 2.606161] exynos-dwc3 usb@12000000: no suspend clk specified -[ 2.611378] usb@12000000 supply vdd33 not found, using dummy regulator -[ 2.617914] usb@12000000 supply vdd10 not found, using dummy regulator -[ 2.827315] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller -[ 2.831429] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 -[ 2.839448] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 -[ 2.847798] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 -[ 2.853868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 -[ 2.860494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 -[ 2.867701] usb usb1: Product: xHCI Host Controller -[ 2.872533] usb usb1: Manufacturer: Linux 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 xhci-hcd -[ 2.881167] usb usb1: SerialNumber: xhci-hcd.2.auto -[ 2.886652] hub 1-0:1.0: USB hub found -[ 2.889736] hub 1-0:1.0: 1 port detected -[ 2.894002] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller -[ 2.899133] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 -[ 2.906825] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. -[ 2.921596] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 -[ 2.933658] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 -[ 2.946113] usb usb2: Product: xHCI Host Controller -[ 2.956186] usb usb2: Manufacturer: Linux 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 xhci-hcd -[ 2.970073] usb usb2: SerialNumber: xhci-hcd.2.auto -[ 2.980849] hub 2-0:1.0: USB hub found -[ 2.989822] hub 2-0:1.0: 1 port detected -[ 2.999427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver -[ 3.011144] ehci-exynos: EHCI EXYNOS driver -[ 3.020824] exynos-ehci 12110000.usb: EHCI Host Controller -[ 3.031467] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 3 -[ 3.044463] exynos-ehci 12110000.usb: irq 103, io mem 0x12110000 -[ 3.062533] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 -[ 3.073764] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 -[ 3.085646] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 -[ 3.098058] usb usb3: Product: EHCI Host Controller -[ 3.107995] usb usb3: Manufacturer: Linux 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 ehci_hcd -[ 3.121704] usb usb3: SerialNumber: 12110000.usb -[ 3.132021] hub 3-0:1.0: USB hub found -[ 3.140810] hub 3-0:1.0: 3 ports detected -[ 3.150534] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver -[ 3.161717] ohci-exynos: OHCI EXYNOS driver -[ 3.171047] exynos-ohci 12120000.usb: USB Host Controller -[ 3.181389] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 4 -[ 3.194099] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000 -[ 3.261693] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 -[ 3.273374] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 -[ 3.285460] usb usb4: Product: USB Host Controller -[ 3.295090] usb usb4: Manufacturer: Linux 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 ohci_hcd -[ 3.308595] usb usb4: SerialNumber: 12120000.usb -[ 3.318705] hub 4-0:1.0: USB hub found -[ 3.327283] hub 4-0:1.0: 3 ports detected -[ 3.336853] usbcore: registered new interface driver usb-storage -[ 3.358155] usb3503 usb-hub: switched to HUB mode -[ 3.367644] usb3503 usb-hub: usb3503_probe: probed in hub mode -[ 3.378409] using random self ethernet address -[ 3.387602] using random host ethernet address -[ 3.397306] usb0: HOST MAC 1e:41:6c:8b:c0:f9 -[ 3.406230] usb0: MAC 9e:76:63:1e:59:7e -[ 3.414608] using random self ethernet address -[ 3.423557] using random host ethernet address -[ 3.437554] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 -[ 3.448726] g_ether gadget: g_ether ready -[ 3.457859] mousedev: PS/2 mouse device common for all mice -[ 3.469234] s3c-rtc 101e0000.rtc: failed to find rtc source clock -[ 3.479829] s3c-rtc: probe of 101e0000.rtc failed with error -2 -[ 3.519530] s5m-rtc s5m-rtc: rtc core: registered s5m-rtc as rtc0 -[ 3.531818] i2c /dev entries driver -[ 3.543304] thermal thermal_zone0: failed to read out thermal zone (-22) -[ 3.554515] 10060000.tmu supply vtmu not found, using dummy regulator -[ 3.566502] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled -[ 3.580000] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com -[ 3.612983] sdhci: Secure Digital Host Controller Interface driver -[ 3.621462] sdhci: Copyright(c) Pierre Ossman -[ 3.628192] Synopsys Designware Multimedia Card Interface Driver -[ 3.636912] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. -[ 3.646032] dwmmc_exynos 12200000.mmc: Using internal DMA controller. -[ 3.654648] dwmmc_exynos 12200000.mmc: Version ID is 241a -[ 3.662202] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 101,32 bit host data width,128 deep fifo -[ 3.673931] dwmmc_exynos 12200000.mmc: No vqmmc regulator found -[ 3.707555] dwmmc_exynos 12200000.mmc: 1 slots initialized -[ 3.715351] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. -[ 3.725349] dwmmc_exynos 12220000.mmc: Using internal DMA controller. -[ 3.735818] dwmmc_exynos 12220000.mmc: Version ID is 241a -[ 3.743247] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 102,32 bit host data width,128 deep fifo -[ 3.754752] dwmmc_exynos 12220000.mmc: No vqmmc regulator found -[ 3.792543] dwmmc_exynos 12220000.mmc: 1 slots initialized -[ 3.801233] usbcore: registered new interface driver usbhid -[ 3.808806] usbhid: USB HID core driver -[ 3.818199] NET: Registered protocol family 10 -[ 3.827239] mmc0: MAN_BKOPS_EN bit is not set -[ 3.833735] sit: IPv6 over IPv4 tunneling driver -[ 3.840806] NET: Registered protocol family 17 -[ 3.847175] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) -[ 3.858943] NET: Registered protocol family 15 -[ 3.865494] Registering SWP/SWPB emulation handler -[ 3.872407] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) -[ 3.884734] mmc0: new DDR MMC card at address 0001 -[ 3.892214] input: gpio_keys as /devices/platform/gpio_keys/input/input0 -[ 3.906703] mmcblk0: mmc0:0001 M4G1FA 3.72 GiB -[ 3.913251] s5m-rtc s5m-rtc: setting system clock to 2000-10-05 10:17:10 UTC (970741030) -[ 3.932554] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB -[ 3.940672] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready -[ 3.953746] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB -[ 3.966886] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB -[ 3.975783] mmcblk0: p1 p2 p3 p4 -[ 4.016575] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) -[ 4.028560] mmc1: new high speed SDHC card at address 1234 -[ 4.041614] mmcblk1: mmc1:1234 SA04G 3.63 GiB -[ 4.049736] mmcblk1: p1 p2 p3 -[ 13.947511] Waiting up to 110 more seconds for network. -[ 23.952509] Waiting up to 100 more seconds for network. -[ 33.957510] Waiting up to 90 more seconds for network. -[ 43.962509] Waiting up to 80 more seconds for network. -[ 53.967513] Waiting up to 70 more seconds for network. -[ 63.972536] Waiting up to 60 more seconds for network. -[ 73.982520] Waiting up to 50 more seconds for network. -[ 83.987518] Waiting up to 40 more seconds for network. -~$off -# PYBOOT: Exception: kernel: ERROR: Timeout waiting for kernel to finish booting. -# -# PYBOOT: cmdline: pyboot -s -w -m modules.tar.xz arndale arch/arm/boot/zImage arch/arm/boot/dts/exynos5250-arndale.dtb -# PYBOOT: Time: 122.05 (bootloader: 28.87, setup: 0.19, kernel: 0.00) -# PYBOOT: Result: FAIL diff --git a/a/content_digest b/N1/content_digest index 59144c2..0af6804 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,22 +1,9 @@ "ref\01444177807-15524-1-git-send-email-k.kozlowski@samsung.com\0" - "From\0Kevin Hilman <khilman@kernel.org>\0" - "Subject\0Re: [RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy)\0" + "From\0khilman@kernel.org (Kevin Hilman)\0" + "Subject\0[RFT 0/3] usb: usb3503: Fix probing on Arndale board (missing phy)\0" "Date\0Fri, 09 Oct 2015 12:18:19 -0700\0" - "To\0Krzysztof Kozlowski <k.kozlowski@samsung.com>\0" - "Cc\0Greg Kroah-Hartman <gregkh@linuxfoundation.org>" - Peter Chen <peter.chen@freescale.com> - Marek Szyprowski <m.szyprowski@samsung.com> - Ben Gamari <ben@smart-cactus.org> - Wolfram Sang <wsa@the-dreams.de> - linux-usb@vger.kernel.org - linux-kernel@vger.kernel.org - devicetree@vger.kernel.org - Kukjin Kim <kgene@kernel.org> - linux-arm-kernel@lists.infradead.org - linux-samsung-soc@vger.kernel.org - Arnd Bergmann <arnd@arndb.de> - " riku.voipio@linaro.org\0" - "\01:1\0" + "To\0linux-arm-kernel@lists.infradead.org\0" + "\00:1\0" "b\0" "Hi Krzystof,\n" "\n" @@ -35,444 +22,11 @@ "exynos_defconfig. I booted it on my arndale, and I still don't see the\n" "networking come up. Full boot log attached.\n" "\n" - Kevin - "\01:2\0" - "fn\0boot-arndale.txt\0" - "b\0" - "Connected to arndale console [channel connected] (~$quit to exit)\n" - "(user:khilman) is already connected\n" - "\n" - "\n" - "# PYBOOT: console: connected.\n" - "~$hardreset\n" - "\n" - "Command(arndale console)> hardreset\n" - "(user:khilman) Reboot arndale\n" - "\n" - "\n" - "U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250\n" - "\n" - "CPU:Exynos5250@1000MHz\n" - "\n" - "Board: for ARNDALE5250\n" - "I2C: ready\n" - "DRAM: 2 GiB\n" - "WARNING: Caches not enabled\n" - "\n" - "Checking Boot Mode ... SDMMC\n" - "MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1, EXYNOS DWMMC: 2\n" - "In: serial\n" - "Out: serial\n" - "Err: serial\n" - "Net: No ethernet found.\n" - "(Re)start USB...\n" - "USB0: USB EHCI 1.00\n" - "scanning bus 0 for devices... 4 USB Device(s) found\n" - " scanning usb for storage devices... 0 Storage Device(s) found\n" - " scanning usb for ethernet devices... 1 Ethernet Device(s) found\n" - "Hit any key to stop autoboot: \n" - "\n" - "# PYBOOT: u-boot: taking control.\n" - " 3 0 \n" - "ARNDALE5250 # \n" - "ARNDALE5250 # version\n" - "version\n" - "\n" - "U-Boot 2013.01.-rc1-dirty (Jun 28 2013 - 07:14:48) for ARNDALE5250\n" - "arm-linux-gnueabi-gcc (Ubuntu/Linaro 4.7.2-1ubuntu1) 4.7.2\n" - "GNU ld (GNU Binutils for Ubuntu) 2.22.90.20120919\n" - "ARNDALE5250 # setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4\n" - "setenv bootargs console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4\n" - "ARNDALE5250 # setenv netargs 'setenv bootargs ${bootargs} \"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.3\"'\n" - "setenv netargs 'setenv bootargs ${bootargs} \"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:::none:192.168.1.3\"'\n" - "ARNDALE5250 # if test -n ${initenv}; then run initenv; fi\n" - "if test -n ${initenv}; then run initenv; fi\n" - "ARNDALE5250 # if test -n ${preboot}; then run preboot; fi\n" - "if test -n ${preboot}; then run preboot; fi\n" - "(Re)start USB...\n" - "USB0: USB EHCI 1.00\n" - "scanning bus 0 for devices... 4 USB Device(s) found\n" - " scanning usb for storage devices... 0 Storage Device(s) found\n" - " scanning usb for ethernet devices... 1 Ethernet Device(s) found\n" - "ARNDALE5250 # setenv autoload no; setenv autoboot no\n" - "setenv autoload no; setenv autoboot no\n" - "ARNDALE5250 #dhcp\n" - " dhcp\n" - "Waiting for Ethernet connection... done.\n" - "BOOTP broadcast 1\n" - "DHCP client bound to address 192.168.1.167\n" - "ARNDALE5250 #setenv serverip 192.168.1.2\n" - " setenv serverip 192.168.1.2\n" - "ARNDALE5250 # if test -n ${netargs}; then run netargs; fi\n" - "if test -n ${netargs}; then run netargs; fi\n" - "ARNDALE5250 # tftp 0x41000000 192.168.1.2:tmp/arndale-o13inu/zImage\n" - "tftp 0x41000000 192.168.1.2:tmp/arndale-o13inu/zImage\n" - "Waiting for Ethernet connection... done.\n" - "Using asx0 device\n" - "TFTP from server 192.168.1.2; our IP address is 192.168.1.167\n" - "Filename 'tmp/arndale-o13inu/zImage'.\n" - "Load address: 0x41000000\n" - "Loading: *#################################################################\n" - " #################################################################\n" - " #################################################################\n" - " #################################################################\n" - " ###########################\n" - "done\n" - "Bytes transferred = 4209056 (4039a0 hex)\n" - "ARNDALE5250 # tftp 0x42000000 192.168.1.2:tmp/arndale-o13inu/initrd-vFFjKf.cpio.gz\n" - "tftp 0x42000000 192.168.1.2:tmp/arndale-o13inu/initrd-vFFjKf.cpio.gz\n" - "Waiting for Ethernet connection... done.\n" - "Using asx0 device\n" - "TFTP from server 192.168.1.2; our IP address is 192.168.1.167\n" - "Filename 'tmp/arndale-o13inu/initrd-vFFjKf.cpio.gz'.\n" - "Load address: 0x42000000\n" - "Loading: *#################################################################\n" - " #################################################################\n" - " #################################################################\n" - " #################################################################\n" - " #################################################################\n" - " ################\n" - "done\n" - "Bytes transferred = 5001043 (4c4f53 hex)\n" - "ARNDALE5250 #tftp 0x41f00000 192.168.1.2:tmp/arndale-o13inu/tmp_2g_yE.dtb\n" - " tftp 0x41f00000 192.168.1.2:tmp/arndale-o13inu/tmp_2g_yE.dtb\n" - "Waiting for Ethernet connection... done.\n" - "Using asx0 device\n" - "TFTP from server 192.168.1.2; our IP address is 192.168.1.167\n" - "Filename 'tmp/arndale-o13inu/tmp_2g_yE.dtb'.\n" - "Load address: 0x41f00000\n" - "Loading: *###\n" - "done\n" - "Bytes transferred = 42207 (a4df hex)\n" - "ARNDALE5250 # printenv bootargs\n" - "printenv bootargs\n" - "bootargs=console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.3\n" - "ARNDALE5250 #bootz 0x41000000 - 0x41f00000\n" - "\n" - "# PYBOOT: u-boot: jumping to kernel image\n" - " bootz 0x41000000 - 0x41f00000\n" - "## Flattened Device Tree blob at 41f00000\n" - " Booting using the fdt blob at 0x41f00000\n" - " Using Device Tree in place at 41f00000, end 41f0d4de\n" - "\n" - "Starting kernel ...\n" + "Kevin\n" "\n" - "[ 0.000000] Booting Linux on physical CPU 0x0\n" - "[ 0.000000] Linux version 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 (khilman@paris) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #15 SMP PREEMPT Fri Oct 9 11:32:11 PDT 2015\n" - "[ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c5387d\n" - "[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache\n" - "[ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250\n" - "[ 0.000000] cma: Reserved 64 MiB at 0xbc000000\n" - "[ 0.000000] Memory policy: Data cache writealloc\n" - "[ 0.000000] Samsung CPU ID: 0x43520010\n" - "[ 0.000000] PERCPU: Embedded 12 pages/cpu @eefaa000 s18880 r8192 d22080 u49152\n" - "[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 518656\n" - "[ 0.000000] Kernel command line: console=tty0 console=ttySAC2,115200n8 rw root=/dev/mmcblk1p3 rootwait rootfstype=ext4 ip=192.168.1.167:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.3\n" - "[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)\n" - "[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)\n" - "[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)\n" - "[ 0.000000] Memory: 1984248K/2080768K available (5642K kernel code, 238K rwdata, 2020K rodata, 424K init, 315K bss, 30984K reserved, 65536K cma-reserved, 1245184K highmem)\n" - "[ 0.000000] Virtual kernel memory layout:\n" - "[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)\n" - "[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)\n" - "[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)\n" - "[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)\n" - "[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)\n" - "[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)\n" - "[ 0.000000] .text : 0xc0008000 - 0xc0783e2c (7664 kB)\n" - "[ 0.000000] .init : 0xc0784000 - 0xc07ee000 ( 424 kB)\n" - "[ 0.000000] .data : 0xc07ee000 - 0xc0829ac0 ( 239 kB)\n" - "[ 0.000000] .bss : 0xc082c000 - 0xc087ac98 ( 316 kB)\n" - "[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1\n" - "[ 0.000000] Preemptible hierarchical RCU implementation.\n" - "[ 0.000000] Build-time adjustment of leaf fanout to 32.\n" - "[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.\n" - "[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2\n" - "[ 0.000000] NR_IRQS:16 nr_irqs:16 16\n" - "[ 0.000000] GIC physical location is 0x10481000\n" - "[ 0.000000] L2C: failed to init: -19\n" - "[ 0.000000] Exynos5250: clock setup completed, armclk=1000000000\n" - "[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).\n" - "[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns\n" - "[ 0.000000] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns\n" - "[ 0.000000] Switching to timer-based delay loop, resolution 41ns\n" - "[ 0.000005] Ignoring duplicate/late registration of read_current_timer delay\n" - "[ 0.000019] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns\n" - "[ 0.000036] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns\n" - "[ 0.000500] Console: colour dummy device 80x30\n" - "[ 0.001021] console [tty0] enabled\n" - "[ 0.001050] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=120000)\n" - "[ 0.001088] pid_max: default: 32768 minimum: 301\n" - "[ 0.001255] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)\n" - "[ 0.001279] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)\n" - "[ 0.001883] CPU: Testing write buffer coherency: ok\n" - "[ 0.002098] CPU0: update cpu_capacity 1024\n" - "[ 0.002120] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000\n" - "[ 0.002237] Setting up static identity map for 0x40008280 - 0x400082d8\n" - "[ 0.045354] CPU1: update cpu_capacity 1024\n" - "[ 0.045359] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001\n" - "[ 0.045430] Brought up 2 CPUs\n" - "[ 0.045476] SMP: Total of 2 processors activated (96.00 BogoMIPS).\n" - "[ 0.045493] CPU: All CPU(s) started in HYP mode.\n" - "[ 0.045509] CPU: Virtualization extensions available.\n" - "[ 0.046537] devtmpfs: initialized\n" - "[ 0.062748] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0\n" - "[ 0.063475] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns\n" - "[ 0.064645] pinctrl core: initialized pinctrl subsystem\n" - "[ 0.065743] NET: Registered protocol family 16\n" - "[ 0.066740] DMA: preallocated 256 KiB pool for atomic coherent allocations\n" - "[ 0.080285] cpuidle: using governor ladder\n" - "[ 0.095321] cpuidle: using governor menu\n" - "[ 0.100126] exynos-audss-clk 3810000.audss-clock-controller: setup completed\n" - "[ 0.167935] SCSI subsystem initialized\n" - "[ 0.168227] usbcore: registered new interface driver usbfs\n" - "[ 0.168314] usbcore: registered new interface driver hub\n" - "[ 0.169201] usbcore: registered new device driver usb\n" - "[ 0.170046] s3c-i2c 12c60000.i2c: slave address 0x66\n" - "[ 0.170072] s3c-i2c 12c60000.i2c: bus frequency set to 18 KHz\n" - "[ 0.491736] VDD_33ON_2.8V: Failed to create debugfs directory\n" - "[ 0.647588] s3c-i2c 12c60000.i2c: i2c-0: S3C I2C adapter\n" - "[ 0.647751] s3c-i2c 12c80000.i2c: slave address 0x50\n" - "[ 0.647775] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz\n" - "[ 0.648150] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter\n" - "[ 0.648290] s3c-i2c 12c90000.i2c: slave address 0x00\n" - "[ 0.648314] s3c-i2c 12c90000.i2c: bus frequency set to 65 KHz\n" - "[ 0.648662] s3c-i2c 12c90000.i2c: i2c-3: S3C I2C adapter\n" - "[ 0.648761] s3c-i2c 12ce0000.i2c: slave address 0x38\n" - "[ 0.648783] s3c-i2c 12ce0000.i2c: bus frequency set to 65 KHz\n" - "[ 0.649129] s3c-i2c 12ce0000.i2c: i2c-8: S3C I2C adapter\n" - "[ 0.649236] s3c-i2c 121d0000.i2c: slave address 0x38\n" - "[ 0.649258] s3c-i2c 121d0000.i2c: bus frequency set to 39 KHz\n" - "[ 0.649552] s3c-i2c 121d0000.i2c: i2c-9: S3C I2C adapter\n" - "[ 0.650097] s2mps11-clk s5m8767-clk: could not find clock sub-node\n" - "[ 0.650130] s2mps11-clk: probe of s5m8767-clk failed with error -22\n" - "[ 0.650516] Advanced Linux Sound Architecture Driver Initialized.\n" - "[ 0.652521] clocksource: Switched to clocksource arch_sys_counter\n" - "[ 0.664490] NET: Registered protocol family 2\n" - "[ 0.664944] TCP established hash table entries: 8192 (order: 3, 32768 bytes)\n" - "[ 0.665041] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)\n" - "[ 0.665217] TCP: Hash tables configured (established 8192 bind 8192)\n" - "[ 0.665277] UDP hash table entries: 512 (order: 2, 24576 bytes)\n" - "[ 0.665327] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)\n" - "[ 0.665506] NET: Registered protocol family 1\n" - "[ 0.665771] RPC: Registered named UNIX socket transport module.\n" - "[ 0.665793] RPC: Registered udp transport module.\n" - "[ 0.665809] RPC: Registered tcp transport module.\n" - "[ 0.665824] RPC: Registered tcp NFSv4.1 backchannel transport module.\n" - "[ 0.666024] Trying to unpack rootfs image as initramfs...\n" - "[ 0.938249] Freeing initrd memory: 4884K (c2000000 - c24c5000)\n" - "[ 0.939603] futex hash table entries: 512 (order: 3, 32768 bytes)\n" - "[ 0.952560] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.\n" - "[ 0.953717] bounce: pool size: 64 pages\n" - "[ 0.953745] io scheduler noop registered\n" - "[ 0.953770] io scheduler deadline registered\n" - "[ 0.954005] io scheduler cfq registered (default)\n" - "[ 0.956204] 12100000.phy supply vbus not found, using dummy regulator\n" - "[ 0.956293] 12100000.phy supply vbus-boost not found, using dummy regulator\n" - "[ 0.961350] dma-pl330 121a0000.pdma: Loaded driver for PL330 DMAC-241330\n" - "[ 0.961381] dma-pl330 121a0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32\n" - "[ 0.964976] dma-pl330 121b0000.pdma: Loaded driver for PL330 DMAC-241330\n" - "[ 0.965004] dma-pl330 121b0000.pdma: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32\n" - "[ 0.966057] dma-pl330 10800000.mdma: Loaded driver for PL330 DMAC-241330\n" - "[ 0.966084] dma-pl330 10800000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32\n" - "[ 0.967115] dma-pl330 11c10000.mdma: Loaded driver for PL330 DMAC-241330\n" - "[ 0.967140] dma-pl330 11c10000.mdma: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32\n" - "[ 1.041727] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n" - "[ 1.043705] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 56, base_baud = 0) is a S3C6400/10\n" - "[ 1.044148] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 57, base_baud = 0) is a S3C6400/10\n" - "[ 1.044549] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 58, base_baud = 0) is a S3C6400/10\n" - "[ 1.804319] console [ttySAC2] enabled\n" - "[ 1.808353] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 59, base_baud = 0) is a S3C6400/10\n" - "[ 1.818298] [drm] Initialized drm 1.1.0 20060810\n" - "[ 1.822549] of_graph_get_next_endpoint(): no port node found in /dp-controller@145B0000\n" - "[ 1.839670] exynos-drm exynos-drm: bound 14400000.fimd (ops fimd_component_ops)\n" - "[ 1.846168] exynos-drm exynos-drm: bound 145b0000.dp-controller (ops exynos_dp_ops)\n" - "[ 1.853287] exynos-drm exynos-drm: bound 14450000.mixer (ops mixer_component_ops)\n" - "[ 1.860856] exynos-drm exynos-drm: bound 14530000.hdmi (ops hdmi_component_ops)\n" - "[ 1.867943] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).\n" - "[ 1.874528] [drm] No driver support for vblank timestamp query.\n" - "[ 1.892099] Division by zero in kernel.\n" - "[ 1.892108] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 #15\n" - "[ 1.892110] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)\n" - "[ 1.892131] [<c001554c>] (unwind_backtrace) from [<c00122e0>] (show_stack+0x10/0x14)\n" - "[ 1.892145] [<c00122e0>] (show_stack) from [<c01f19b0>] (dump_stack+0x70/0xbc)\n" - "[ 1.892157] [<c01f19b0>] (dump_stack) from [<c01f04f4>] (Ldiv0+0x8/0x10)\n" - "[ 1.892168] [<c01f04f4>] (Ldiv0) from [<c02a672c>] (fimd_commit+0x1f0/0x2b0)\n" - "[ 1.892178] [<c02a672c>] (fimd_commit) from [<c02a4000>] (exynos_drm_crtc_enable+0x1c/0x28)\n" - "[ 1.892189] [<c02a4000>] (exynos_drm_crtc_enable) from [<c027f658>] (drm_atomic_helper_commit_modeset_enables+0x94/0x190)\n" - "[ 1.892200] [<c027f658>] (drm_atomic_helper_commit_modeset_enables) from [<c02a3ac0>] (exynos_atomic_commit_complete+0x2c/0x1c4)\n" - "[ 1.892209] [<c02a3ac0>] (exynos_atomic_commit_complete) from [<c02a3e94>] (exynos_atomic_commit+0x17c/0x1c4)\n" - "[ 1.892219] [<c02a3e94>] (exynos_atomic_commit) from [<c02a0e90>] (drm_atomic_commit+0x40/0x64)\n" - "[ 1.892229] [<c02a0e90>] (drm_atomic_commit) from [<c0281cf4>] (restore_fbdev_mode+0x2c8/0x2ec)\n" - "[ 1.892240] [<c0281cf4>] (restore_fbdev_mode) from [<c0282c44>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x2c/0x74)\n" - "[ 1.892249] [<c0282c44>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c0282cb8>] (drm_fb_helper_set_par+0x2c/0x54)\n" - "[ 1.892259] [<c0282cb8>] (drm_fb_helper_set_par) from [<c0228fe0>] (fbcon_init+0x47c/0x4e4)\n" - "[ 1.892268] [<c0228fe0>] (fbcon_init) from [<c025fc20>] (visual_init+0xb4/0x100)\n" - "[ 1.892277] [<c025fc20>] (visual_init) from [<c0261bd8>] (do_bind_con_driver+0x134/0x350)\n" - "[ 1.892286] [<c0261bd8>] (do_bind_con_driver) from [<c0261f64>] (do_take_over_console+0x170/0x1d8)\n" - "[ 1.892295] [<c0261f64>] (do_take_over_console) from [<c02290ac>] (do_fbcon_takeover+0x64/0xcc)\n" - "[ 1.892305] [<c02290ac>] (do_fbcon_takeover) from [<c003ce7c>] (notifier_call_chain+0x44/0x84)\n" - "[ 1.892315] [<c003ce7c>] (notifier_call_chain) from [<c003d08c>] (__blocking_notifier_call_chain+0x48/0x60)\n" - "[ 1.892324] [<c003d08c>] (__blocking_notifier_call_chain) from [<c003d0bc>] (blocking_notifier_call_chain+0x18/0x20)\n" - "[ 1.892334] [<c003d0bc>] (blocking_notifier_call_chain) from [<c022e5e4>] (register_framebuffer+0x184/0x268)\n" - "[ 1.892345] [<c022e5e4>] (register_framebuffer) from [<c0283850>] (drm_fb_helper_initial_config+0x24c/0x3fc)\n" - "[ 1.892354] [<c0283850>] (drm_fb_helper_initial_config) from [<c02a4754>] (exynos_drm_fbdev_init+0xec/0x14c)\n" - "[ 1.892362] [<c02a4754>] (exynos_drm_fbdev_init) from [<c02789ac>] (drm_kms_helper_hotplug_event+0x24/0x28)\n" - "[ 1.892370] [<c02789ac>] (drm_kms_helper_hotplug_event) from [<c02791fc>] (drm_helper_hpd_irq_event+0xd0/0x158)\n" - "[ 1.892377] [<c02791fc>] (drm_helper_hpd_irq_event) from [<c02a38c0>] (exynos_drm_load+0x140/0x15c)\n" - "[ 1.892385] [<c02a38c0>] (exynos_drm_load) from [<c028bfc4>] (drm_dev_register+0xa0/0xb4)\n" - "[ 1.892394] [<c028bfc4>] (drm_dev_register) from [<c028d950>] (drm_platform_init+0x40/0xd0)\n" - "[ 1.892403] [<c028d950>] (drm_platform_init) from [<c02b61d0>] (try_to_bring_up_master.part.0+0xcc/0x108)\n" - "[ 1.892412] [<c02b61d0>] (try_to_bring_up_master.part.0) from [<c02b62b4>] (component_master_add_with_match+0xa8/0x124)\n" - "[ 1.892420] [<c02b62b4>] (component_master_add_with_match) from [<c02a399c>] (exynos_drm_platform_probe+0xc0/0xdc)\n" - "[ 1.892429] [<c02a399c>] (exynos_drm_platform_probe) from [<c02bb9cc>] (platform_drv_probe+0x50/0xac)\n" - "[ 1.892436] [<c02bb9cc>] (platform_drv_probe) from [<c02ba43c>] (driver_probe_device+0x1e0/0x2a0)\n" - "[ 1.892443] [<c02ba43c>] (driver_probe_device) from [<c02ba588>] (__driver_attach+0x8c/0x90)\n" - "[ 1.892451] [<c02ba588>] (__driver_attach) from [<c02b8b58>] (bus_for_each_dev+0x54/0x88)\n" - "[ 1.892461] [<c02b8b58>] (bus_for_each_dev) from [<c02b9b1c>] (bus_add_driver+0xe8/0x1f4)\n" - "[ 1.892469] [<c02b9b1c>] (bus_add_driver) from [<c02bad54>] (driver_register+0x78/0xf4)\n" - "[ 1.892477] [<c02bad54>] (driver_register) from [<c02a3a50>] (exynos_drm_register_drivers+0x24/0x68)\n" - "[ 1.892484] [<c02a3a50>] (exynos_drm_register_drivers) from [<c02a3ce4>] (exynos_drm_init+0x88/0xbc)\n" - "[ 1.892492] [<c02a3ce4>] (exynos_drm_init) from [<c0009748>] (do_one_initcall+0x84/0x1d4)\n" - "[ 1.892534] [<c0009748>] (do_one_initcall) from [<c0784d94>] (kernel_init_freeable+0x11c/0x1e8)\n" - "[ 1.892545] [<c0784d94>] (kernel_init_freeable) from [<c0553968>] (kernel_init+0x8/0xec)\n" - "[ 1.892554] [<c0553968>] (kernel_init) from [<c000f7b8>] (ret_from_fork+0x14/0x3c)\n" - "[ 1.895349] exynos-dp 145b0000.dp-controller: failed to get hpd plug status\n" - "[ 1.977198] Console: switching to colour frame buffer device 365x114\n" - "[ 2.471635] exynos-drm exynos-drm: fb0: frame buffer device\n" - "[ 2.487526] [drm] Initialized exynos 1.0.0 20110530 on minor 0\n" - "[ 2.508940] brd: module loaded\n" - "[ 2.546839] loop: module loaded\n" - "[ 2.549502] usbcore: registered new interface driver r8152\n" - "[ 2.554136] usbcore: registered new interface driver asix\n" - "[ 2.559482] usbcore: registered new interface driver ax88179_178a\n" - "[ 2.565570] usbcore: registered new interface driver cdc_ether\n" - "[ 2.571395] usbcore: registered new interface driver smsc75xx\n" - "[ 2.577131] usbcore: registered new interface driver smsc95xx\n" - "[ 2.582841] usbcore: registered new interface driver net1080\n" - "[ 2.588478] usbcore: registered new interface driver cdc_subset\n" - "[ 2.594376] usbcore: registered new interface driver zaurus\n" - "[ 2.599967] usbcore: registered new interface driver cdc_ncm\n" - "[ 2.606161] exynos-dwc3 usb@12000000: no suspend clk specified\n" - "[ 2.611378] usb@12000000 supply vdd33 not found, using dummy regulator\n" - "[ 2.617914] usb@12000000 supply vdd10 not found, using dummy regulator\n" - "[ 2.827315] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller\n" - "[ 2.831429] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1\n" - "[ 2.839448] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010\n" - "[ 2.847798] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000\n" - "[ 2.853868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002\n" - "[ 2.860494] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1\n" - "[ 2.867701] usb usb1: Product: xHCI Host Controller\n" - "[ 2.872533] usb usb1: Manufacturer: Linux 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 xhci-hcd\n" - "[ 2.881167] usb usb1: SerialNumber: xhci-hcd.2.auto\n" - "[ 2.886652] hub 1-0:1.0: USB hub found\n" - "[ 2.889736] hub 1-0:1.0: 1 port detected\n" - "[ 2.894002] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller\n" - "[ 2.899133] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2\n" - "[ 2.906825] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.\n" - "[ 2.921596] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003\n" - "[ 2.933658] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1\n" - "[ 2.946113] usb usb2: Product: xHCI Host Controller\n" - "[ 2.956186] usb usb2: Manufacturer: Linux 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 xhci-hcd\n" - "[ 2.970073] usb usb2: SerialNumber: xhci-hcd.2.auto\n" - "[ 2.980849] hub 2-0:1.0: USB hub found\n" - "[ 2.989822] hub 2-0:1.0: 1 port detected\n" - "[ 2.999427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n" - "[ 3.011144] ehci-exynos: EHCI EXYNOS driver\n" - "[ 3.020824] exynos-ehci 12110000.usb: EHCI Host Controller\n" - "[ 3.031467] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 3\n" - "[ 3.044463] exynos-ehci 12110000.usb: irq 103, io mem 0x12110000\n" - "[ 3.062533] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00\n" - "[ 3.073764] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002\n" - "[ 3.085646] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1\n" - "[ 3.098058] usb usb3: Product: EHCI Host Controller\n" - "[ 3.107995] usb usb3: Manufacturer: Linux 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 ehci_hcd\n" - "[ 3.121704] usb usb3: SerialNumber: 12110000.usb\n" - "[ 3.132021] hub 3-0:1.0: USB hub found\n" - "[ 3.140810] hub 3-0:1.0: 3 ports detected\n" - "[ 3.150534] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver\n" - "[ 3.161717] ohci-exynos: OHCI EXYNOS driver\n" - "[ 3.171047] exynos-ohci 12120000.usb: USB Host Controller\n" - "[ 3.181389] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 4\n" - "[ 3.194099] exynos-ohci 12120000.usb: irq 103, io mem 0x12120000\n" - "[ 3.261693] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001\n" - "[ 3.273374] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1\n" - "[ 3.285460] usb usb4: Product: USB Host Controller\n" - "[ 3.295090] usb usb4: Manufacturer: Linux 4.3.0-rc4-next-20151009-06709-g4b92b96f4ad7 ohci_hcd\n" - "[ 3.308595] usb usb4: SerialNumber: 12120000.usb\n" - "[ 3.318705] hub 4-0:1.0: USB hub found\n" - "[ 3.327283] hub 4-0:1.0: 3 ports detected\n" - "[ 3.336853] usbcore: registered new interface driver usb-storage\n" - "[ 3.358155] usb3503 usb-hub: switched to HUB mode\n" - "[ 3.367644] usb3503 usb-hub: usb3503_probe: probed in hub mode\n" - "[ 3.378409] using random self ethernet address\n" - "[ 3.387602] using random host ethernet address\n" - "[ 3.397306] usb0: HOST MAC 1e:41:6c:8b:c0:f9\n" - "[ 3.406230] usb0: MAC 9e:76:63:1e:59:7e\n" - "[ 3.414608] using random self ethernet address\n" - "[ 3.423557] using random host ethernet address\n" - "[ 3.437554] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008\n" - "[ 3.448726] g_ether gadget: g_ether ready\n" - "[ 3.457859] mousedev: PS/2 mouse device common for all mice\n" - "[ 3.469234] s3c-rtc 101e0000.rtc: failed to find rtc source clock\n" - "[ 3.479829] s3c-rtc: probe of 101e0000.rtc failed with error -2\n" - "[ 3.519530] s5m-rtc s5m-rtc: rtc core: registered s5m-rtc as rtc0\n" - "[ 3.531818] i2c /dev entries driver\n" - "[ 3.543304] thermal thermal_zone0: failed to read out thermal zone (-22)\n" - "[ 3.554515] 10060000.tmu supply vtmu not found, using dummy regulator\n" - "[ 3.566502] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled\n" - "[ 3.580000] device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: dm-devel@redhat.com\n" - "[ 3.612983] sdhci: Secure Digital Host Controller Interface driver\n" - "[ 3.621462] sdhci: Copyright(c) Pierre Ossman\n" - "[ 3.628192] Synopsys Designware Multimedia Card Interface Driver\n" - "[ 3.636912] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.\n" - "[ 3.646032] dwmmc_exynos 12200000.mmc: Using internal DMA controller.\n" - "[ 3.654648] dwmmc_exynos 12200000.mmc: Version ID is 241a\n" - "[ 3.662202] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 101,32 bit host data width,128 deep fifo\n" - "[ 3.673931] dwmmc_exynos 12200000.mmc: No vqmmc regulator found\n" - "[ 3.707555] dwmmc_exynos 12200000.mmc: 1 slots initialized\n" - "[ 3.715351] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.\n" - "[ 3.725349] dwmmc_exynos 12220000.mmc: Using internal DMA controller.\n" - "[ 3.735818] dwmmc_exynos 12220000.mmc: Version ID is 241a\n" - "[ 3.743247] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 102,32 bit host data width,128 deep fifo\n" - "[ 3.754752] dwmmc_exynos 12220000.mmc: No vqmmc regulator found\n" - "[ 3.792543] dwmmc_exynos 12220000.mmc: 1 slots initialized\n" - "[ 3.801233] usbcore: registered new interface driver usbhid\n" - "[ 3.808806] usbhid: USB HID core driver\n" - "[ 3.818199] NET: Registered protocol family 10\n" - "[ 3.827239] mmc0: MAN_BKOPS_EN bit is not set\n" - "[ 3.833735] sit: IPv6 over IPv4 tunneling driver\n" - "[ 3.840806] NET: Registered protocol family 17\n" - "[ 3.847175] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)\n" - "[ 3.858943] NET: Registered protocol family 15\n" - "[ 3.865494] Registering SWP/SWPB emulation handler\n" - "[ 3.872407] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)\n" - "[ 3.884734] mmc0: new DDR MMC card at address 0001\n" - "[ 3.892214] input: gpio_keys as /devices/platform/gpio_keys/input/input0\n" - "[ 3.906703] mmcblk0: mmc0:0001 M4G1FA 3.72 GiB \n" - "[ 3.913251] s5m-rtc s5m-rtc: setting system clock to 2000-10-05 10:17:10 UTC (970741030)\n" - "[ 3.932554] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB\n" - "[ 3.940672] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready\n" - "[ 3.953746] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB\n" - "[ 3.966886] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB\n" - "[ 3.975783] mmcblk0: p1 p2 p3 p4\n" - "[ 4.016575] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)\n" - "[ 4.028560] mmc1: new high speed SDHC card at address 1234\n" - "[ 4.041614] mmcblk1: mmc1:1234 SA04G 3.63 GiB \n" - "[ 4.049736] mmcblk1: p1 p2 p3\n" - "[ 13.947511] Waiting up to 110 more seconds for network.\n" - "[ 23.952509] Waiting up to 100 more seconds for network.\n" - "[ 33.957510] Waiting up to 90 more seconds for network.\n" - "[ 43.962509] Waiting up to 80 more seconds for network.\n" - "[ 53.967513] Waiting up to 70 more seconds for network.\n" - "[ 63.972536] Waiting up to 60 more seconds for network.\n" - "[ 73.982520] Waiting up to 50 more seconds for network.\n" - "[ 83.987518] Waiting up to 40 more seconds for network.\n" - "~$off\n" - "# PYBOOT: Exception: kernel: ERROR: Timeout waiting for kernel to finish booting.\n" - "#\n" - "# PYBOOT: cmdline: pyboot -s -w -m modules.tar.xz arndale arch/arm/boot/zImage arch/arm/boot/dts/exynos5250-arndale.dtb\n" - "# PYBOOT: Time: 122.05 (bootloader: 28.87, setup: 0.19, kernel: 0.00)\n" - # PYBOOT: Result: FAIL + "-------------- next part --------------\n" + "An embedded and charset-unspecified text was scrubbed...\n" + "Name: boot-arndale.txt\n" + URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20151009/2c313ab4/attachment-0001.txt> -04b9a87c9a9c11f8aeb8ff84aa62ab33ba6b9cd566acba120e5da952fbf81e6f +e5c1de351544507573c9d277179abb3dd6f2688e9d728bbadebdafb9622cf444
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.