From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mahmood Naderan Date: Wed, 01 Sep 2010 08:03:17 +0000 Subject: Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors Message-Id: <811317.75109.qm@web50003.mail.re2.yahoo.com> MIME-Version: 1 Content-Type: multipart/mixed; boundary="===============1018791250499553743==" List-Id: References: <929339.59525.qm@web50002.mail.re2.yahoo.com> In-Reply-To: <929339.59525.qm@web50002.mail.re2.yahoo.com> To: lm-sensors@vger.kernel.org --===============1018791250499553743== Content-Type: multipart/alternative; boundary="0-507225290-1283328197=:75109" --0-507225290-1283328197=:75109 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable >sudo ./sensors-detect=0AYes=0AIntel Core family thermal sensor...=A0=A0=A0= =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 Success!=0A= =A0=A0=A0 (driver `coretemp')=0A...=0ANow follows a summary of the probes I= have just done.=0AJust press ENTER to continue:=0ADriver `it87':=0A=A0 * I= SA bus, address 0x290=0A=A0=A0=A0 Chip `ITE IT8720F Super IO Sensors' (conf= idence: 9)=0ADriver `coretemp':=0A=A0 * Chip `Intel Core family thermal sen= sor' (confidence: 9)=0ADo you want to generate /etc/sysconfig/lm_sensors? (= yes/NO): y=0ACopy prog/init/lm_sensors.init to /etc/init.d/lm_sensors=0Afor= initialization at boot time.=0AYou should now start the lm_sensors service= to load the required=0Akernel modules.=0A=0AI then copy that file and rest= art=0Amahmood@localhost:~$ls /etc/init.d/lm*=0A/etc/init.d/lm-sensors=0A=0A= However this is what I see again=0Amahmood@localhost:~$sudo sensors=0Ait872= 0-isa-0290=0AAdapter: ISA adapter=0Ain0:=A0=A0=A0=A0=A0=A0=A0=A0 +0.86 V=A0= (min =3D=A0 +0.00 V, max =3D=A0 +4.08 V)=0Ain1:=A0=A0=A0=A0=A0=A0=A0=A0 +1= .58 V=A0 (min =3D=A0 +0.00 V, max =3D=A0 +4.08 V)=0Ain2:=A0=A0=A0=A0=A0=A0= =A0=A0 +3.39 V=A0 (min =3D=A0 +0.00 V, max =3D=A0 +4.08 V)=0Ain3:=A0=A0=A0= =A0=A0=A0=A0=A0 +3.02 V=A0 (min =3D=A0 +0.00 V, max =3D=A0 +4.08 V)=0Ain4:= =A0=A0=A0=A0=A0=A0=A0=A0 +0.05 V=A0 (min =3D=A0 +0.00 V, max =3D=A0 +4.08 V= )=A0=A0 ALARM=0Ain5:=A0=A0=A0=A0=A0=A0=A0=A0 +3.12 V=A0 (min =3D=A0 +0.00 V= , max =3D=A0 +4.08 V)=0Ain6:=A0=A0=A0=A0=A0=A0=A0=A0 +0.02 V=A0 (min =3D=A0= +0.00 V, max =3D=A0 +4.08 V)=A0=A0 ALARM=0Ain7:=A0=A0=A0=A0=A0=A0=A0=A0 +2= .16 V=A0 (min =3D=A0 +0.00 V, max =3D=A0 +4.08 V)=0AVbat:=A0=A0=A0=A0=A0=A0= =A0 +3.10 V=0Afan1:=A0=A0=A0=A0=A0=A0 1638 RPM=A0 (min =3D=A0=A0 10 RPM)=0A= fan2:=A0=A0=A0=A0=A0=A0=A0 618 RPM=A0 (min =3D=A0=A0=A0 0 RPM)=0Afan3:=A0= =A0=A0=A0=A0=A0 1278 RPM=A0 (min =3D=A0=A0 10 RPM)=0Afan4:=A0=A0=A0=A0=A0= =A0 1203 RPM=A0 (min =3D=A0=A0=A0 0 RPM)=0Atemp1:=A0=A0=A0=A0=A0=A0 +35.0= =C2=B0C=A0 (low=A0 =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C)=A0 sensor =3D= thermistor=0Atemp2:=A0=A0=A0=A0=A0=A0 +25.0=C2=B0C=A0 (low=A0 =3D +127.0= =C2=B0C, high =3D +127.0=C2=B0C)=A0 sensor =3D thermistor=0Atemp3:=A0=A0=A0= =A0=A0=A0 +33.0=C2=B0C=A0 (low=A0 =3D +127.0=C2=B0C, high =3D +90.0=C2=B0C)= =A0 sensor =3D thermistor=0Acpu0_vid:=A0=A0 +0.313 V=0A=0ANo core-i7.... :(= =0A// Naderan *Mahmood;=0A=0A=0A=0A=0A________________________________=0AFr= om: Nikola Pajkovsky =0ATo: lm-sensors@lm-sensors.org= =0ASent: Wed, September 1, 2010 12:23:10 PM=0ASubject: Re: [lm-sensors] lms= ensors doesn't detect core-i7 sensors=0A=0Asudo ./sensors-detect=0A=0AOn 09= /01/2010 09:46 AM, Mahmood Naderan wrote:=0A>=A0 >just svn update # not nee= ded if you have fresh checkout=0A> To double check and be sure again:=0A> m= ahmood@localhost:~$ svn update 5857=0A> Skipp= ed '5857'=0A>=0A> Then:=0A>=0A>=0A> mahmood@localhost:~$ cd lm-sensors/prog/detect/=0A> mahmood@localhost:~/lm-sensors/p= rog/detect$ =0A> sudo s= ensors-detect=0A> # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100= )=0A> # System: Gigabyte Technology Co., Ltd. P55-USB3=0A> This program wil= l help you determine which kernel modules you need=0A> to load to use lm_se= nsors most effectively. It is generally safe=0A> and recommended to accept = the default answers to all questions,=0A> unless you know what you're doing= .=0A> Some south bridges, CPUs or memory controllers contain embedded senso= rs.=0A> Do you want to scan for them? This is totally safe. (YES/no): y=0A>= Silicon Integrated Systems SIS5595... No=0A> VIA VT82C686 Integrated Senso= rs... No=0A> VIA VT8231 Integrated Sensors... No=0A> AMD K8 thermal sensors= ... No=0A> AMD Family 10h thermal sensors... No=0A> AMD Family 11h thermal = sensors... No=0A> Intel Core family thermal sensor... No=0A> Intel Atom the= rmal sensor... No=0A> Intel AMB FB-DIMM thermal sensor... No=0A> VIA C7 the= rmal sensor... No=0A> VIA Nano thermal sensor... No=0A> Some Super I/O chip= s contain embedded sensors. We have to write to=0A> standard I/O ports to p= robe them. This is usually safe.=0A> Do you want to scan for Super I/O sens= ors? (YES/no): y=0A> Probing for Super-I/O at 0x2e/0x2f=0A> Trying family `= National Semiconductor'... No=0A> Trying family `SMSC'... No=0A> Trying fam= ily `VIA/Winbond/Nuvoton/Fintek'... No=0A> Trying family `ITE'... Yes=0A> F= ound `ITE IT8720F Super IO Sensors' Success!=0A> (address 0x290, driver `it= 87')=0A> Probing for Super-I/O at 0x4e/0x4f=0A> Trying family `National Sem= iconductor'... No=0A> Trying family `SMSC'... No=0A> Trying family `VIA/Win= bond/Nuvoton/Fintek'... No=0A> Trying family `ITE'... No=0A> Some systems (= mainly servers) implement IPMI, a set of common interfaces=0A> through whic= h system health data may be retrieved, amongst other things.=0A> We first t= ry to get the information from SMBIOS. If we don't find it=0A> there, we ha= ve to read from arbitrary I/O ports to probe for such=0A> interfaces. This = is normally safe. Do you want to scan for IPMI=0A> interfaces? (YES/no): y= =0A> Probing for `IPMI BMC KCS' at 0xca0... No=0A> Probing for `IPMI BMC SM= IC' at 0xca8... No=0A> Some hardware monitoring chips are accessible throug= h the ISA I/O ports.=0A> We have to write to arbitrary I/O ports to probe t= hem. This is usually=0A> safe though. Yes, you do have ISA I/O ports even i= f you do not have any=0A> ISA slots! Do you want to scan the ISA I/O ports?= (yes/NO): y=0A> Probing for `National Semiconductor LM78' at 0x290... No= =0A> Probing for `National Semiconductor LM79' at 0x290... No=0A> Probing f= or `Winbond W83781D' at 0x290... No=0A> Probing for `Winbond W83782D' at 0x= 290... No=0A> Lastly, we can probe the I2C/SMBus adapters for connected har= dware=0A> monitoring devices. This is the most risky part, and while it wor= ks=0A> reasonably well on most systems, it has been reported to cause troub= le=0A> on some systems.=0A> Do you want to probe the I2C/SMBus adapters now= ? (YES/no): y=0A> Found unknown SMBus adapter 8086:3b30 at 0000:00:1f.3.=0A= > Sorry, no supported PCI bus adapters found.=0A> Module i2c-dev loaded suc= cessfully.=0A> Now follows a summary of the probes I have just done.=0A> Ju= st press ENTER to continue:=0A> Driver `it87':=0A> * ISA bus, address 0x290= =0A> Chip `ITE IT8720F Super IO Sensors' (confidence: 9)=0A> To load everyt= hing that is needed, add this to /etc/modules:=0A> #----cut here----=0A> # = Chip drivers=0A> it87=0A> #----cut here----=0A> If you have some drivers bu= ilt into your kernel, the list above will=0A> contain too many modules. Ski= p the appropriate ones!=0A> Do you want to add these lines automatically to= /etc/modules? (yes/NO)yes=0A> Successful!=0A> Monitoring programs won't wo= rk until the needed modules are=0A> loaded. You may want to run '/etc/init.= d/module-init-tools start'=0A> to load them.=0A> Unloading i2c-dev... OK=0A= >=0A> But that didn't help. See the sensors output:=0A>=0A> mahmood@localho= st:~/lm-sensors/prog/detect$ =0A> sudo sensors=0A> it8720-isa-0290=0A> Adapter: ISA adapter=0A> in= 0: +0.86 V (min =3D +0.00 V, max =3D +4.08 V)=0A> in1: +1.58 V (min =3D +0.= 00 V, max =3D +4.08 V)=0A> in2: +3.39 V (min =3D +0.00 V, max =3D +4.08 V)= =0A> in3: +3.02 V (min =3D +0.00 V, max =3D +4.08 V)=0A> in4: +0.05 V (min = =3D +0.00 V, max =3D +4.08 V) ALARM=0A> in5: +3.12 V (min =3D +0.00 V, max = =3D +4.08 V)=0A> in6: +0.02 V (min =3D +0.00 V, max =3D +4.08 V) ALARM=0A> = in7: +2.16 V (min =3D +0.00 V, max =3D +4.08 V)=0A> Vbat: +3.10 V=0A> fan1:= 1683 RPM (min =3D 10 RPM)=0A> fan2: 644 RPM (min =3D 0 RPM)=0A> fan3: 1280= RPM (min =3D 10 RPM)=0A> fan4: 1203 RPM (min =3D 0 RPM)=0A> temp1: +35.0= =C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermist= or=0A> temp2: +25.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) = sensor =3D thermistor=0A> temp3: +33.0=C2=B0C (low =3D +127.0=C2=B0C, high = =3D +90.0=C2=B0C) sensor =3D thermistor=0A> cpu0_vid: +0.313 V=0A>=0A> Any = idea? Thanks,=0A> *// Naderan *Mahmood;*=0A>=0A>=0A>-----------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------------------------------------------- ----------------------=0A>-=0A--=0A> *From:* Nikola Pajkovsky =0A> *To:* lm-sensors@lm-sensors.org=0A> *Sent:* Wed, September 1, = 2010 12:08:07 PM=0A> *Subject:* Re: [lm-sensors] lmsensors doesn't detect c= ore-i7 sensors=0A>=0A> On 09/01/2010 09:30 AM, Mahmood Naderan wrote:=0A>= =A0 > Here is what I did:=0A>=A0 > mahmood@localhost:~$ svn checkout =0A>http://lm-sensors.org/svn/lm-sensors/trunk lm-s= ensors=0A>=A0 > ...=0A>=A0 > Checked out revision 5857.=0A> Yes=0A>=0A>=A0 = > mahmood@localhost:~$ svn update =0A>http://= lm-sensors.org/svn/lm-sensors/trunk lm-sensors=0A>=A0 > Skipped 'http://lm-= sensors.org/svn/lm-sensors/trunk'=0A>=A0 > At revision 5857.=0A>=A0 > Summa= ry of conflicts:=0A>=A0 > Skipped paths: 1=0A>=A0 > Is that what you meant?= =0A>=A0 > *// Naderan *Mahmood;*=0A> just svn update # not needed if you ha= ve fresh checkout=0A>=0A> in lm-sensors/prog/detect run sensors-detect and = it should find your core-i7=0A>=0A>=A0 >=0A>=A0 >=0A>=A0 > =0A>------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------------------------------------------------------=0A> ----------------= --=0A----=0A> --=0A>=A0 > *From:* Nikola Pajkovsky >=0A>=A0 > *To:* lm-sensors@lm-sensors.org =0A>=A0 > *Sent:* Wed, September 1, 2010 11:49:0= 3 AM=0A>=A0 > *Subject:* Re: [lm-sensors] lmsensors doesn't detect core-i7 = sensors=0A>=A0 >=0A>=A0 > On 09/01/2010 08:38 AM, Mahmood Naderan wrote:=0A= >=A0 > > Dear all,=0A>=A0 > >=0A>=A0 > > I ran sensors-detect to detect Cor= e-i7 temperatures but it doesn't show =0A>them. Here is the output of senso= rs-detect:=0A>=A0 > >=0A>=A0 > >=0A>=A0 > > mahmood@localhost:~$ sudo senso= rs-detect=0A>=A0 > > # sensors-detect revision 5818 (2010-01-18 17:22:07 +0= 100)=0A>=A0 > > # System: Gigabyte Technology Co., Ltd. P55-USB3=0A>=A0 > >= =0A>=A0 > > This program will help you determine which kernel modules you n= eed=0A>=A0 > > to load to use lm_sensors most effectively. It is generally = safe=0A>=A0 > > and recommended to accept the default answers to all questi= ons,=0A>=A0 > > unless you know what you're doing.=0A>=A0 > >=0A>=A0 > > So= me south bridges, CPUs or memory controllers contain embedded sensors.=0A>= =A0 > > Do you want to scan for them? This is totally safe. (YES/no): y=0A>= =A0 > > Silicon Integrated Systems SIS5595... No=0A>=A0 > > VIA VT82C686 In= tegrated Sensors... No=0A>=A0 > > VIA VT8231 Integrated Sensors... No=0A>= =A0 > > AMD K8 thermal sensors... No=0A>=A0 > > AMD Family 10h thermal sens= ors... No=0A>=A0 > > AMD Family 11h thermal sensors... No=0A>=A0 > > Intel = Core family thermal sensor... No=0A>=A0 > > Intel Atom thermal sensor... No= =0A>=A0 > > Intel AMB FB-DIMM thermal sensor... No=0A>=A0 > > VIA C7 therma= l sensor... No=0A>=A0 > > VIA Nano thermal sensor... No=0A>=A0 > >=0A>=A0 >= > Some Super I/O chips contain embedded sensors. We have to write to=0A>= =A0 > > standard I/O ports to probe them. This is usually safe.=0A>=A0 > > = Do you want to scan for Super I/O sensors? (YES/no): y=0A>=A0 > > Probing f= or Super-I/O at 0x2e/0x2f=0A>=A0 > > Trying family `National Semiconductor'= ... No=0A>=A0 > > Trying family `SMSC'... No=0A>=A0 > > Trying family `VIA/= Winbond/Nuvoton/Fintek'... No=0A>=A0 > > Trying family `ITE'... Yes=0A>=A0 = > > Found `ITE IT8720F Super IO Sensors' Success!=0A>=A0 > > (address 0x290= , driver `it87')=0A>=A0 > > Probing for Super-I/O at 0x4e/0x4f=0A>=A0 > > T= rying family `National Semiconductor'... No=0A>=A0 > > Trying family `SMSC'= ... No=0A>=A0 > > Trying family `VIA/Winbond/Nuvoton/Fintek'... No=0A>=A0 >= > Trying family `ITE'... No=0A>=A0 > >=0A>=A0 > > Some systems (mainly ser= vers) implement IPMI, a set of common interfaces=0A>=A0 > > through which s= ystem health data may be retrieved, amongst other things.=0A>=A0 > > We fir= st try to get the information from SMBIOS. If we don't find it=0A>=A0 > > t= here, we have to read from arbitrary I/O ports to probe for such=0A>=A0 > >= interfaces. This is normally safe. Do you want to scan for IPMI=0A>=A0 > >= interfaces? (YES/no): y=0A>=A0 > > Probing for `IPMI BMC KCS' at 0xca0... = No=0A>=A0 > > Probing for `IPMI BMC SMIC' at 0xca8... No=0A>=A0 > >=0A>=A0 = > > Some hardware monitoring chips are accessible through the ISA I/O ports= .=0A>=A0 > > We have to write to arbitrary I/O ports to probe them. This is= usually=0A>=A0 > > safe though. Yes, you do have ISA I/O ports even if you= do not have any=0A>=A0 > > ISA slots! Do you want to scan the ISA I/O port= s? (yes/NO): y=0A>=A0 > > Probing for `National Semiconductor LM78' at 0x29= 0... No=0A>=A0 > > Probing for `National Semiconductor LM79' at 0x290... No= =0A>=A0 > > Probing for `Winbond W83781D' at 0x290... No=0A>=A0 > > Probing= for `Winbond W83782D' at 0x290... No=0A>=A0 > >=0A>=A0 > > Lastly, we can = probe the I2C/SMBus adapters for connected hardware=0A>=A0 > > monitoring d= evices. This is the most risky part, and while it works=0A>=A0 > > reasonab= ly well on most systems, it has been reported to cause trouble=0A>=A0 > > o= n some systems.=0A>=A0 > > Do you want to probe the I2C/SMBus adapters now?= (YES/no): y=0A>=A0 > > Found unknown SMBus adapter 8086:3b30 at 0000:00:1f= .3.=0A>=A0 > > Sorry, no supported PCI bus adapters found.=0A>=A0 > > Modul= e i2c-dev loaded successfully.=0A>=A0 > >=0A>=A0 > > Now follows a summary = of the probes I have just done.=0A>=A0 > > Just press ENTER to continue:=0A= >=A0 > >=0A>=A0 > > Driver `it87':=0A>=A0 > > * ISA bus, address 0x290=0A>= =A0 > > Chip `ITE IT8720F Super IO Sensors' (confidence: 9)=0A>=A0 > >=0A>= =A0 > > To load everything that is needed, add this to /etc/modules:=0A>=A0= > > #----cut here----=0A>=A0 > > # Chip drivers=0A>=A0 > > it87=0A>=A0 > >= #----cut here----=0A>=A0 > > If you have some drivers built into your kern= el, the list above will=0A>=A0 > > contain too many modules. Skip the appro= priate ones!=0A>=A0 > >=0A>=A0 > > Do you want to add these lines automatic= ally to /etc/modules? (yes/NO)yes=0A>=A0 > > Successful!=0A>=A0 > >=0A>=A0 = > > Monitoring programs won't work until the needed modules are=0A>=A0 > > = loaded. You may want to run '/etc/init.d/module-init-tools start'=0A>=A0 > = > to load them.=0A>=A0 > >=0A>=A0 > > Unloading i2c-dev... OK=0A>=A0 > >=0A= >=A0 > >=0A>=A0 > > Then I ran sensors:=0A>=A0 > >=0A>=A0 > > mahmood@local= host:~$ sudo sensors=0A>=A0 > > it8720-isa-0290=0A>=A0 > > Adapter: ISA ada= pter=0A>=A0 > > in0: +0.86 V (min =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > > = in1: +1.58 V (min =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > > in2: +3.39 V (mi= n =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > > in3: +3.02 V (min =3D +0.00 V, m= ax =3D +4.08 V)=0A>=A0 > > in4: +0.05 V (min =3D +0.00 V, max =3D +4.08 V) = ALARM=0A>=A0 > > in5: +3.12 V (min =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > >= in6: +0.02 V (min =3D +0.00 V, max =3D +4.08 V) ALARM=0A>=A0 > > in7: +2.1= 6 V (min =3D +0.00 V, max =3D +4.08 V)=0A>=A0 > > Vbat: +3.10 V=0A>=A0 > > = fan1: 1679 RPM (min =3D 10 RPM)=0A>=A0 > > fan2: 644 RPM (min =3D 0 RPM)=0A= >=A0 > > fan3: 1278 RPM (min =3D 10 RPM)=0A>=A0 > > fan4: 1205 RPM (min =3D= 0 RPM)=0A>=A0 > > temp1: +36.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +12= 7.0=C2=B0C) sensor =3D thermistor=0A>=A0 > > temp2: +25.0=C2=B0C (low =3D += 127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermistor=0A>=A0 > > temp= 3: +33.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +90.0=C2=B0C) sensor =3D t= hermistor=0A>=A0 > > cpu0_vid: +0.313 V=0A>=A0 > >=0A>=A0 > >=0A>=A0 > > Wh= at can I do then? currently I have kubuntu 10.04=0A>=A0 > >=0A>=A0 > > *// = Naderan *Mahmood;*=0A>=A0 > >=0A>=A0 > >=0A>=A0 >=0A>=A0 > Pick sensors-det= ect from svn or file bug against lm-sensors in ubuntu and =0A>maintainer(if= he is nice) update lm-sensors.=0A>=A0 >=0A>=0A=0A=0A______________________= _________________________=0Alm-sensors mailing list=0Alm-sensors@lm-sensors= .org=0Ahttp://lists.lm-sensors.org/mailman/listinfo/lm-sensors=0A=0A=0A=0A = --0-507225290-1283328197=:75109 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable
=0A
>sudo ./sensors-detect
=0A
Yes
In= tel Core family thermal sensor...       =             &nb= sp;     Success!
    (driver `coretem= p')
...
=0A
Now follows a summary of the probes= I have just done.
Just press ENTER to continue:
=0A
Dr= iver `it87':
  * ISA bus, address 0x290
    Chip = `ITE IT8720F Super IO Sensors' (confidence: 9)
=0A
Driver = `coretemp':
  * Chip `Intel Core family thermal sensor' (confidence= : 9)
=0A
Do you want to generate /etc/sysconfig/lm_sensors= ? (yes/NO): y
Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensorsfor initialization at boot time.
You should now start the lm_sensors s= ervice to load the required
kernel modules.
=0A
I th= en copy that file and restart
=0A
mahmood@localhost:~$ ls /etc/init.d/lm*
/etc/init.d= /lm-sensors
=0A
However this is what I see again
= =0A
mahmood@localhost:~$ sudo sensors
it8720-isa-0290
Adapter: ISA adapter
in0: = ;        +0.86 V  (min =3D  +0= .00 V, max =3D  +4.08 V)
in1:      &n= bsp;  +1.58 V  (min =3D  +0.00 V, max =3D  +4.08 V)
= in2:         +3.39 V  (min =3D=   +0.00 V, max =3D  +4.08 V)
in3:     = ;    +3.02 V  (min =3D  +0.00 V, max =3D  +4.= 08 V)
in4:         +0.05 V = (min =3D  +0.00 V, max =3D  +4.08 V)   ALARM
in5:&n= bsp;        +3.12 V  (min =3D = +0.00 V, max =3D  +4.08 V)
in6:         +0.02 V  (= min =3D  +0.00 V, max =3D  +4.08 V)   ALARM
in7:&nbs= p;        +2.16 V  (min =3D  += 0.00 V, max =3D  +4.08 V)
Vbat:      =   +3.10 V
fan1:       1638 RPM  = (min =3D   10 RPM)
fan2:      &n= bsp; 618 RPM  (min =3D    0 RPM)
fan3:  &n= bsp;    1278 RPM  (min =3D   10 RPM)
fan4:=        1203 RPM  (min =3D  &nb= sp; 0 RPM)
temp1:       +35.0=C2=B0C = (low  =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C)  sensor =3D the= rmistor
temp2:       +25.0=C2=B0C  (l= ow  =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C)  sensor =3D thermistor
temp3:       +33.0=C2=B0C = ; (low  =3D +127.0=C2=B0C, high =3D +90.0=C2=B0C)  sensor =3D the= rmistor
cpu0_vid:   +0.313 V
=0A
No core-i= 7.... :(
=0A
=0A
// Nade= ran *Mahmood;
=0A

=0A

=0A
=0A
=0AFrom: Nikola Pajkovsky <npajkovs@redhat.com>
<= SPAN style=3D"FONT-WEIGHT: bold">To: lm-sensors@lm-sensors.orgSent: Wed, September 1, 2= 010 12:23:10 PM
Subject:= Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors

su= do ./sensors-detect

On 09/01/2010 09:46 AM, Mahmood Naderan wrote:>  >just svn update # not needed if you have fresh checkout> To double check and be sure again:
> mahmood@localhost:~$ <m= ailto:mahmood@localhost:~$> svn update 5857
> Skipped '5857'
&g= t;
> Then:
>
>
> mahmood@localhost:~$ <mailto:ma= hmood@blackfish:~$> cd lm-sensors/prog/detect/
> mahmood@localhost= :~/lm-sensors/prog/detect$ <mailto:mahmood@blackfish:~/lm-sensors/prog/d= etect$> sudo sensors-detect
> # sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
> # System:= Gigabyte Technology Co., Ltd. P55-USB3
> This program will help you = determine which kernel modules you need
> to load to use lm_sensors m= ost effectively. It is generally safe
> and recommended to accept the= default answers to all questions,
> unless you know what you're doin= g.
> Some south bridges, CPUs or memory controllers contain embedded = sensors.
> Do you want to scan for them? This is totally safe. (YES/n= o): y
> Silicon Integrated Systems SIS5595... No
> VIA VT82C686= Integrated Sensors... No
> VIA VT8231 Integrated Sensors... No
&g= t; AMD K8 thermal sensors... No
> AMD Family 10h thermal sensors... N= o
> AMD Family 11h thermal sensors... No
> Intel Core family th= ermal sensor... No
> Intel Atom thermal sensor... No
> Intel AM= B FB-DIMM thermal sensor... No
> VIA C7 thermal sensor... No
> VIA Nano thermal sensor... No
> Some Super I/O chips cont= ain embedded sensors. We have to write to
> standard I/O ports to pro= be them. This is usually safe.
> Do you want to scan for Super I/O se= nsors? (YES/no): y
> Probing for Super-I/O at 0x2e/0x2f
> Tryin= g family `National Semiconductor'... No
> Trying family `SMSC'... No<= BR>> Trying family `VIA/Winbond/Nuvoton/Fintek'... No
> Trying fam= ily `ITE'... Yes
> Found `ITE IT8720F Super IO Sensors' Success!
&= gt; (address 0x290, driver `it87')
> Probing for Super-I/O at 0x4e/0x= 4f
> Trying family `National Semiconductor'... No
> Trying fami= ly `SMSC'... No
> Trying family `VIA/Winbond/Nuvoton/Fintek'... No> Trying family `ITE'... No
> Some systems (mainly servers) imple= ment IPMI, a set of common interfaces
> through which system health d= ata may be retrieved, amongst other things.
> We first try to get the information from SMBIOS. If we don't find it
> there, we hav= e to read from arbitrary I/O ports to probe for such
> interfaces. Th= is is normally safe. Do you want to scan for IPMI
> interfaces? (YES/= no): y
> Probing for `IPMI BMC KCS' at 0xca0... No
> Probing fo= r `IPMI BMC SMIC' at 0xca8... No
> Some hardware monitoring chips are= accessible through the ISA I/O ports.
> We have to write to arbitrar= y I/O ports to probe them. This is usually
> safe though. Yes, you do= have ISA I/O ports even if you do not have any
> ISA slots! Do you w= ant to scan the ISA I/O ports? (yes/NO): y
> Probing for `National Se= miconductor LM78' at 0x290... No
> Probing for `National Semiconducto= r LM79' at 0x290... No
> Probing for `Winbond W83781D' at 0x290... No=
> Probing for `Winbond W83782D' at 0x290... No
> Lastly, we ca= n probe the I2C/SMBus adapters for connected hardware
> monitoring devices. This is the most risky part, and while it works
>= ; reasonably well on most systems, it has been reported to cause trouble> on some systems.
> Do you want to probe the I2C/SMBus adapters = now? (YES/no): y
> Found unknown SMBus adapter 8086:3b30 at 0000:00:1= f.3.
> Sorry, no supported PCI bus adapters found.
> Module i2c= -dev loaded successfully.
> Now follows a summary of the probes I hav= e just done.
> Just press ENTER to continue:
> Driver `it87':> * ISA bus, address 0x290
> Chip `ITE IT8720F Super IO Sensors'= (confidence: 9)
> To load everything that is needed, add this to /et= c/modules:
> #----cut here----
> # Chip drivers
> it87> #----cut here----
> If you have some drivers built into your ke= rnel, the list above will
> contain too many modules. Skip the approp= riate ones!
> Do you want to add these lines automatically to /etc/modules? (yes/NO)yes
> Successful!
> Monitoring programs = won't work until the needed modules are
> loaded. You may want to run= '/etc/init.d/module-init-tools start'
> to load them.
> Unload= ing i2c-dev... OK
>
> But that didn't help. See the sensors out= put:
>
> mahmood@localhost:~/lm-sensors/prog/detect$ <mailto= :mahmood@blackfish:~/lm-sensors/prog/detect$> sudo sensors
> it872= 0-isa-0290
> Adapter: ISA adapter
> in0: +0.86 V (min =3D +0.00= V, max =3D +4.08 V)
> in1: +1.58 V (min =3D +0.00 V, max =3D +4.08 V= )
> in2: +3.39 V (min =3D +0.00 V, max =3D +4.08 V)
> in3: +3.0= 2 V (min =3D +0.00 V, max =3D +4.08 V)
> in4: +0.05 V (min =3D +0.00 = V, max =3D +4.08 V) ALARM
> in5: +3.12 V (min =3D +0.00 V, max =3D +4= .08 V)
> in6: +0.02 V (min =3D +0.00 V, max =3D +4.08 V) ALARM
>= ; in7: +2.16 V (min =3D +0.00 V, max =3D +4.08 V)
> Vbat: +3.10 V
= > fan1: 1683 RPM (min =3D 10 RPM)
> fan2: 644 RPM (min =3D 0 RPM)
> fan3: 1280 RPM (= min =3D 10 RPM)
> fan4: 1203 RPM (min =3D 0 RPM)
> temp1: +35.0= =C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor =3D thermist= or
> temp2: +25.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2= =B0C) sensor =3D thermistor
> temp3: +33.0=C2=B0C (low =3D +127.0=C2= =B0C, high =3D +90.0=C2=B0C) sensor =3D thermistor
> cpu0_vid: +0.313= V
>
> Any idea? Thanks,
> *// Naderan *Mahmood;*
>=
>
> --------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------------------------------------------------------------------- ----------------------
--
> *From:* Nikola Pajkovsky <npaj= kovs@redhat.com>
> *To:* lm-sensors@lm-sensors.= org
> *Sent:* Wed, September 1, 2010 12:08:07 PM
> *Subject= :* Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors
>
>= ; On 09/01/2010 09:30 AM, Mahmood Naderan wrote:
>  > Here is= what I did:
>  > mahmood@localhost:~$ <mailto:mahmood@loc= alhost:~$> svn checkout http://lm-sensors.org/svn/lm-sensors/trunk lm-se= nsors
>  > ...
>  > Checked out revision 5857.<= BR>> Yes
>
>  > mahmood@localhost:~$ <mailto:mahm= ood@blackfish:~$> svn update http://lm-sensors.org/svn/lm-sensors/trunk lm-sensors
>  > Skipped 'http://lm-sensors.org/svn/lm-sensor= s/trunk'
>  > At revision 5857.
>  > Summary of= conflicts:
>  > Skipped paths: 1
>  > Is that = what you meant?
>  > *// Naderan *Mahmood;*
> just svn = update # not needed if you have fresh checkout
>
> in lm-sensor= s/prog/detect run sensors-detect and it should find your core-i7
>>  >
>  >
>  > --------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ---------------------------------------------------------------------------= ------------------------------------------------------------------- ------------------
----
> --
>  > *From:* Nikola Pa= jkovsky <npajkovs@redhat.com <mailto:npajkovs@redhat.com>>
>  > *To:* lm-sensors@lm-sensors.org= <mailto:lm-sensors@lm-sensors.org>
>&nb= sp; > *Sent:* Wed, September 1, 2010 11:49:03 AM
>  > *Sub= ject:* Re: [lm-sensors] lmsensors doesn't detect core-i7 sensors
>&nb= sp; >
>  > On 09/01/2010 08:38 AM, Mahmood Naderan wrote:<= BR>>  > > Dear all,
>  > >
>  >= ; > I ran sensors-detect to detect Core-i7 temperatures but it doesn't s= how them. Here is the output of sensors-detect:
>  > >
> = ; > >
>  > > mahmood@localhost:~$ sudo sensors-detec= t
>  > > # sensors-detect revision 5818 (2010-01-18 17:22:= 07 +0100)
>  > > # System: Gigabyte Technology Co., Ltd. P= 55-USB3
>  > >
>  > > This program will h= elp you determine which kernel modules you need
>  > > to = load to use lm_sensors most effectively. It is generally safe
> = > > and recommended to accept the default answers to all questions,<= BR>>  > > unless you know what you're doing.
>  &g= t; >
>  > > Some south bridges, CPUs or memory controll= ers contain embedded sensors.
>  > > Do you want to scan f= or them? This is totally safe. (YES/no): y
>  > > Silicon = Integrated Systems SIS5595... No
>  > > VIA VT82C686 Integrated Sensors... No
>  > > VIA VT8231 Integ= rated Sensors... No
>  > > AMD K8 thermal sensors... No>  > > AMD Family 10h thermal sensors... No
>  &g= t; > AMD Family 11h thermal sensors... No
>  > > Intel = Core family thermal sensor... No
>  > > Intel Atom thermal= sensor... No
>  > > Intel AMB FB-DIMM thermal sensor... N= o
>  > > VIA C7 thermal sensor... No
>  > &g= t; VIA Nano thermal sensor... No
>  > >
>  >= > Some Super I/O chips contain embedded sensors. We have to write to>  > > standard I/O ports to probe them. This is usually saf= e.
>  > > Do you want to scan for Super I/O sensors? (YES/= no): y
>  > > Probing for Super-I/O at 0x2e/0x2f
>&n= bsp; > > Trying family `National Semiconductor'... No
>  > > Trying family `SMSC'... No
>  > &= gt; Trying family `VIA/Winbond/Nuvoton/Fintek'... No
>  > >= ; Trying family `ITE'... Yes
>  > > Found `ITE IT8720F Sup= er IO Sensors' Success!
>  > > (address 0x290, driver `it8= 7')
>  > > Probing for Super-I/O at 0x4e/0x4f
> = ; > > Trying family `National Semiconductor'... No
>  >= > Trying family `SMSC'... No
>  > > Trying family `VIA= /Winbond/Nuvoton/Fintek'... No
>  > > Trying family `ITE'.= .. No
>  > >
>  > > Some systems (mainly = servers) implement IPMI, a set of common interfaces
>  > >= through which system health data may be retrieved, amongst other things.>  > > We first try to get the information from SMBIOS. If = we don't find it
>  > > there, we have to read from arbitrary I/O ports to probe for such
>  > > interfaces. = This is normally safe. Do you want to scan for IPMI
>  > >= interfaces? (YES/no): y
>  > > Probing for `IPMI BMC KCS'= at 0xca0... No
>  > > Probing for `IPMI BMC SMIC' at 0xca= 8... No
>  > >
>  > > Some hardware monit= oring chips are accessible through the ISA I/O ports.
>  > &g= t; We have to write to arbitrary I/O ports to probe them. This is usually>  > > safe though. Yes, you do have ISA I/O ports even if = you do not have any
>  > > ISA slots! Do you want to scan = the ISA I/O ports? (yes/NO): y
>  > > Probing for `Nationa= l Semiconductor LM78' at 0x290... No
>  > > Probing for `N= ational Semiconductor LM79' at 0x290... No
>  > > Probing = for `Winbond W83781D' at 0x290... No
>  > > Probing for `Winbond W83782D' at 0x290... No
>  > >
> = > > Lastly, we can probe the I2C/SMBus adapters for connected hardwa= re
>  > > monitoring devices. This is the most risky part,= and while it works
>  > > reasonably well on most systems= , it has been reported to cause trouble
>  > > on some sys= tems.
>  > > Do you want to probe the I2C/SMBus adapters n= ow? (YES/no): y
>  > > Found unknown SMBus adapter 8086:3b= 30 at 0000:00:1f.3.
>  > > Sorry, no supported PCI bus ada= pters found.
>  > > Module i2c-dev loaded successfully.>  > >
>  > > Now follows a summary of the = probes I have just done.
>  > > Just press ENTER to contin= ue:
>  > >
>  > > Driver `it87':
>&= nbsp; > > * ISA bus, address 0x290
>  > > Chip `ITE IT8720F Super IO Sensors' (confidence: 9)
>  > >= ;
>  > > To load everything that is needed, add this to /e= tc/modules:
>  > > #----cut here----
>  > &g= t; # Chip drivers
>  > > it87
>  > > #---= -cut here----
>  > > If you have some drivers built into y= our kernel, the list above will
>  > > contain too many mo= dules. Skip the appropriate ones!
>  > >
>  >= ; > Do you want to add these lines automatically to /etc/modules? (yes/N= O)yes
>  > > Successful!
>  > >
>&n= bsp; > > Monitoring programs won't work until the needed modules are<= BR>>  > > loaded. You may want to run '/etc/init.d/module-ini= t-tools start'
>  > > to load them.
>  > >= ;
>  > > Unloading i2c-dev... OK
>  > >
>  > >
>  > > Then I ran sensors:>  > >
>  > > mahmood@localhost:~$ sudo se= nsors
>  > > it8720-isa-0290
>  > > Adapt= er: ISA adapter
>  > > in0: +0.86 V (min =3D +0.00 V, max = =3D +4.08 V)
>  > > in1: +1.58 V (min =3D +0.00 V, max =3D= +4.08 V)
>  > > in2: +3.39 V (min =3D +0.00 V, max =3D +4= .08 V)
>  > > in3: +3.02 V (min =3D +0.00 V, max =3D +4.08= V)
>  > > in4: +0.05 V (min =3D +0.00 V, max =3D +4.08 V)= ALARM
>  > > in5: +3.12 V (min =3D +0.00 V, max =3D +4.08= V)
>  > > in6: +0.02 V (min =3D +0.00 V, max =3D +4.08 V)= ALARM
>  > > in7: +2.16 V (min =3D +0.00 V, max =3D +4.08= V)
>  > > Vbat: +3.10 V
>  > > fan1: 167= 9 RPM (min =3D 10 RPM)
>  > > fan2: 644 RPM (min =3D 0 RPM= )
>  > > fan3: 1278 RPM (min =3D 10 RPM)
>  > > fan4: 1205 RPM (mi= n =3D 0 RPM)
>  > > temp1: +36.0=C2=B0C (low =3D +127.0=C2= =B0C, high =3D +127.0=C2=B0C) sensor =3D thermistor
>  > >= temp2: +25.0=C2=B0C (low =3D +127.0=C2=B0C, high =3D +127.0=C2=B0C) sensor= =3D thermistor
>  > > temp3: +33.0=C2=B0C (low =3D +127.0= =C2=B0C, high =3D +90.0=C2=B0C) sensor =3D thermistor
>  > &g= t; cpu0_vid: +0.313 V
>  > >
>  > >
&g= t;  > > What can I do then? currently I have kubuntu 10.04
&g= t;  > >
>  > > *// Naderan *Mahmood;*
>&n= bsp; > >
>  > >
>  >
>  >= ; Pick sensors-detect from svn or file bug against lm-sensors in ubuntu and= maintainer(if he is nice) update lm-sensors.
>  >
>

_______________________________________________
lm-sensors mail= ing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/m= ailman/listinfo/lm-sensors

=0A=0A=0A=0A=0A=0A=0A= =0A --0-507225290-1283328197=:75109-- --===============1018791250499553743== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors --===============1018791250499553743==--