From: Pascal CHAPPERON <pascal.chapperon@wanadoo.fr>
To: Francois Romieu <romieu@fr.zoreil.com>, linux-kernel@vger.kernel.org
Cc: lars.vahlenberg@mandator.com,
Alexey Dobriyan <adobriyan@gmail.com>,
jgarzik@pobox.com
Subject: Re: [patch 2.6.13-rc3] sis190 driver
Date: Sat, 30 Jul 2005 11:32:11 +0200 (CEST) [thread overview]
Message-ID: <8141764.1122715931842.JavaMail.www@wwinf0802> (raw)
> Message du 29/07/05 00:13
> De : "Francois Romieu" <romieu@fr.zoreil.com>
[...]
> Changes from previous version (20050722)
[...]
> o Minor round of mii/phy related changes. May crash.
>
> Testing reports/review/patches are always appreciated.
>
sis190-120 compiles, loads but does not work (sis190_init_phy() function).
# service network start
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... failed; no link present. Check cable?
[FAILED]
#dmesg
sis190 Gigabit Ethernet driver 1.2 loaded.
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:04.0 to 64
0000:00:04.0: Read MAC address from APC.
eth0: Unknown PHY transceiver at address 1.
0000:00:04.0: sis190 at ffffc20000004c00 (IRQ: 11), 00:11:2f:e9:42:70
eth0: Enabling Auto-negotiation.
# ethtool eth0
Settings for eth0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Current message level: 0x00000037 (55)
Link detected: no
I reverted to sis190-110, which works well on my box.
--
Pascal
next reply other threads:[~2005-07-30 9:32 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-07-30 9:32 Pascal CHAPPERON [this message]
2005-07-30 10:10 ` [patch 2.6.13-rc3] sis190 driver Francois Romieu
-- strict thread matches above, loose matches on Subject: below --
2005-07-30 11:12 Pascal CHAPPERON
2005-07-30 11:22 ` Francois Romieu
2005-07-28 22:11 Francois Romieu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8141764.1122715931842.JavaMail.www@wwinf0802 \
--to=pascal.chapperon@wanadoo.fr \
--cc=adobriyan@gmail.com \
--cc=jgarzik@pobox.com \
--cc=lars.vahlenberg@mandator.com \
--cc=linux-kernel@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.