I got those messages :
===
musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus
number 1
musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89,
<AValid), retry #1, port1 00000100
musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89,
<AValid), retry #2, port1 00000104
musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (89,
<AValid), retry #3, port1 00000104
musb-hdrc musb-hdrc.1.auto: VBUS_ERROR in a_wait_vrise (88,
<AValid), retry #3, port1 0008010c
====
waiting for vrise ?
On Tue, Jun 20, 2017 at 9:52 PM, Riko Ho <antonius.riko@gmail.com> wrote:How can I obtain that "udev" ? and where can I find the log ? "dmesg" | "grep" ? Two days ago, I saw activity on UART when the dongle was inserted, but it's gone now, I can't see the activity.. Any clues ?dmesg should have some information may beThanks On 20/06/17 12:51, Khem Raj wrote: On Mon, Jun 19, 2017 at 8:46 PM, Riko Ho <antonius.riko@gmail.com> wrote: I got all the files needed, but now I get no response from the dongle when I plug it, you might want to check logs and see if there are udev events generated on insertion. Here's the files on the board : root@beaglebone:/lib/firmware/rtlwifi# ls rtl8188efw.bin rtl8192eu_ap_wowlan.bin rtl8723bs_bt.bin rtl8188eufw.bin rtl8192eu_nic.bin rtl8723bs_nic.bin rtl8192cfw.bin rtl8192eu_wowlan.bin rtl8723bs_wowlan.bin rtl8192cfwU.bin rtl8192sefw.bin rtl8723bu_ap_wowlan.bin rtl8192cfwU_B.bin rtl8712u.bin rtl8723bu_nic.bin rtl8192cufw.bin rtl8723aufw_A.bin rtl8723bu_wowlan.bin rtl8192cufw_A.bin rtl8723aufw_B.bin rtl8723fw.bin rtl8192cufw_B.bin rtl8723aufw_B_NoBT.bin rtl8723fw_B.bin rtl8192cufw_TMSC.bin rtl8723befw.bin rtl8821aefw.bin rtl8192defw.bin rtl8723befw_36.bin rtl8821aefw_29.bin rtl8192eefw.bin rtl8723bs_ap_wowlan.bin rtl8821aefw_wowlan.bin On 20/06/17 03:57, Khem Raj wrote: On Sun, Jun 18, 2017 at 8:00 PM, Riko Ho <antonius.riko@gmail.com> wrote: Hello Everyone, How can I obtain : rtl8192eu_nic.bin? I got this message : RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0 usb 1-1: RTL8192EU MAC: 00:0b:81:a2:a5:60 usb 1-1: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin usb 1-1: Direct firmware load for rtlwifi/rtl8192eu_nic.bin failed with error -2 usb 1-1: request_firmware(rtlwifi/rtl8192eu_nic.bin) failed you probably need to add the nonfree firmware bits something like this https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/linux-firmware/linux-firmware_git.bbappend and https://github.com/resin-os/meta-resin/blob/master/meta-resin-common/recipes-kernel/rtl8192cu/rtl8192cu_4.0.2_9000.bb might help Thanks, On 18/06/17 15:49, Martin Jansa wrote: You didn't say which versions you're using. If you're using latest oe-core with gcc7 then you will need v3 version of this change: http://lists.openembedded.org/pipermail/openembedded-devel/2017-June/113247.html I'll send it later today. And how can I clean after building it ? It took about 70Gb of my drive Like any other recipe: bitbake -c clean foo On Sun, Jun 18, 2017 at 1:41 AM, Riko Ho <antonius.riko@gmail.com> wrote: Hello Everyone, I tried to compile chromium but never succeeded, took me already 12 hours and stopped on 99%, I used bitbake for doing it, Is chromium not compatible with arm CPU ? it was working with X86_64 before. And how can I clean after building it ? It took about 70Gb of my drive Thanks -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ -- _______________________________________________ yocto mailing list yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/yocto -- /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/ -- /*******/ Sent by Ubuntu LTS 16.04, 谢谢, Regards, Riko Ho /*******/
/*******/
Sent by Ubuntu LTS 16.04,
谢谢,
Regards,
Riko Ho
/*******/