All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sven Eckelmann <sven@narfation.org>
To: b.a.t.m.a.n@lists.open-mesh.org
Cc: "Linus Lüssing" <linus.luessing@c0d3.blue>
Subject: Re: [PATCH v3 3/5] batman-adv: mcast: implement multicast packet reception and forwarding
Date: Tue, 27 Dec 2022 10:07:36 +0100	[thread overview]
Message-ID: <8399468.NyiUUSuA9g@sven-l14> (raw)
In-Reply-To: <20221226204237.10403-4-linus.luessing@c0d3.blue>

[-- Attachment #1: Type: text/plain, Size: 2120 bytes --]

On Monday, 26 December 2022 21:42:35 CET Linus Lüssing wrote:
> Implement functionality to receive and forward a new TVLV capable
> multicast packet type.
> 
> The new batman-adv multicast packet type allows to contain several
> originator destination addresses within a TVLV. Routers on the way will
> potentially split the batman-adv multicast packet and adjust its tracker
> TVLV contents.
> 
> Routing decisions are still based on the selected BATMAN IV or BATMAN V
> routing algorithm. So this new batman-adv multicast packet type retains
> the same loop-free properties.
> 
> Also a new OGM multicast TVLV flag is introduced to signal to other
> nodes that we are capable of handling a batman-adv multicast packet and
> multicast tracker TVLV. And that all of our hard interfaces have an MTU
> of at least 1280 bytes (IPv6 minimum MTU), as a simple solution for now
> to avoid MTU issues while forwarding.
> 
> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
> ---
>  include/uapi/linux/batadv_packet.h |  48 ++++-
>  net/batman-adv/Makefile            |   1 +
>  net/batman-adv/main.c              |   2 +
>  net/batman-adv/multicast.c         |  48 ++++-
>  net/batman-adv/multicast.h         |   5 +
>  net/batman-adv/multicast_forw.c    | 274 +++++++++++++++++++++++++++++
>  net/batman-adv/originator.c        |   1 +
>  net/batman-adv/routing.c           |  68 +++++++
>  net/batman-adv/routing.h           |  11 ++
>  net/batman-adv/soft-interface.c    |  12 ++
>  net/batman-adv/types.h             |  64 +++++++
>  11 files changed, 523 insertions(+), 11 deletions(-)
>  create mode 100644 net/batman-adv/multicast_forw.c

ecsv/pu: checkpatch ./net/batman-adv/multicast_forw.c
-----------------------------------------------------

    CHECK: Macro argument reuse 'num_dests' - possible side-effects?
    #25: FILE: ./net/batman-adv/multicast_forw.c:25:
    +#define batadv_mcast_forw_tracker_for_each_dest(dest, num_dests) \
    +   for (; num_dests; num_dests--, (dest) += ETH_ALEN)
    
    total: 0 errors, 0 warnings, 1 checks, 274 lines checked


[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2022-12-27  9:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-26 20:42 [PATCH v3 0/5] Implementation of a Stateless Multicast Packet Type Linus Lüssing
2022-12-26 20:42 ` [PATCH v3 1/5] batman-adv: mcast: remove now redundant single ucast forwarding Linus Lüssing
2022-12-26 20:42 ` [PATCH v3 2/5] batman-adv: tvlv: prepare for tvlv enabled multicast packet type Linus Lüssing
2022-12-26 20:42 ` [PATCH v3 3/5] batman-adv: mcast: implement multicast packet reception and forwarding Linus Lüssing
2022-12-27  9:07   ` Sven Eckelmann [this message]
2022-12-27 11:58     ` Linus Lüssing
2022-12-27 12:47       ` Sven Eckelmann
2022-12-26 20:42 ` [PATCH v3 4/5] batman-adv: mcast: implement multicast packet generation Linus Lüssing
2022-12-27  9:34   ` Sven Eckelmann
2022-12-26 20:42 ` [PATCH v3 5/5] batman-adv: mcast: shrink tracker packet after scrubbing Linus Lüssing
2022-12-27 10:46   ` Sven Eckelmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=8399468.NyiUUSuA9g@sven-l14 \
    --to=sven@narfation.org \
    --cc=b.a.t.m.a.n@lists.open-mesh.org \
    --cc=linus.luessing@c0d3.blue \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.