From: Marc Zyngier <maz@kernel.org>
To: adrianhoyin.ng@altera.com
Cc: tglx@linutronix.de, catalin.marinas@arm.com, will@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/1] irqchip/gic-v3: Add Altera Agilex5 address bus width limitation workaround
Date: Fri, 04 Jul 2025 12:29:29 +0100 [thread overview]
Message-ID: <861pqwb3dy.wl-maz@kernel.org> (raw)
In-Reply-To: <6a44509ca0edaabc17e59d2e27fef1c782183456.1751618484.git.adrianhoyin.ng@altera.com>
On Fri, 04 Jul 2025 09:49:50 +0100,
adrianhoyin.ng@altera.com wrote:
>
> From: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
>
> Agilex5 address bus width for the ACE-lite interface is only 32 bits.
> Hence the GIC600 SoC integration for Agilex5 can only access the first
> 32bit of the physical address space.
>
> Add quirk to configure the gfp flag to allocate memory within 32bit
> addressable range. As the 0x0201743b GIC600 ID is not specific to
> Altera, of_machine_is_compatible() is added.
>
> Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
> ---
> arch/arm64/Kconfig | 10 ++++++++++
> drivers/irqchip/irq-gic-v3-its.c | 18 ++++++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 55fc331af337..2286b4d378e2 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -1348,6 +1348,16 @@ config SOCIONEXT_SYNQUACER_PREITS
>
> If unsure, say Y.
>
> +config ALTERA_AGILEX5_ADDR_BUS_WIDTH_LIMITATION
> + bool "Altera Agilex: GIC600 can not access physical addresses higher than 4GB"
> + default y
> + help
> + Agilex5 address bus width for the ACE-lite interface is only 32 bits. Hence
> + the GIC600 SoC integration for Agilex5 can only access the first 32bit of the
> + physical address space.
You're describing it as a feature. But really, it's a bug, and it
deserves an erratum number.
> +
> + If unsure, say Y.
> +
> endmenu # "ARM errata workarounds via the alternatives framework"
>
> choice
> diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
> index d54fa0638dc4..a2cf401568e7 100644
> --- a/drivers/irqchip/irq-gic-v3-its.c
> +++ b/drivers/irqchip/irq-gic-v3-its.c
> @@ -4901,6 +4901,16 @@ static bool __maybe_unused its_enable_rk3568002(void *data)
> return true;
> }
>
> +static bool __maybe_unused its_enable_agilex5(void *data)
> +{
> + if (!of_machine_is_compatible("intel,socfpga-agilex5"))
> + return false;
> +
> + gfp_flags_quirk |= GFP_DMA32;
> +
> + return true;
> +}
> +
> static const struct gic_quirk its_quirks[] = {
> #ifdef CONFIG_CAVIUM_ERRATUM_22375
> {
> @@ -4975,6 +4985,14 @@ static const struct gic_quirk its_quirks[] = {
> .mask = 0xffffffff,
> .init = its_enable_rk3568002,
> },
> +#endif
> +#ifdef ALTERA_AGILEX5_ADDR_BUS_WIDTH_LIMITATION
> + {
> + .desc = "ITS: Altera Agilex5 address bus width limitation",
> + .iidr = 0x0201743b,
> + .mask = 0xffffffff,
> + .init = its_enable_agilex5,
> + },
> #endif
> {
> }
Again, why do you need to reinvent the wheel? There is already *just
above* an existing workaround that implements exactly the same thing.
The whole thing could look like the hack below.
M.
diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c
index d54fa0638dc44..7047408de3e37 100644
--- a/drivers/irqchip/irq-gic-v3-its.c
+++ b/drivers/irqchip/irq-gic-v3-its.c
@@ -4890,10 +4890,17 @@ static bool __maybe_unused its_enable_quirk_hip09_162100801(void *data)
return true;
}
-static bool __maybe_unused its_enable_rk3568002(void *data)
+static bool its_enable_32bit_disaster(void *data)
{
- if (!of_machine_is_compatible("rockchip,rk3566") &&
- !of_machine_is_compatible("rockchip,rk3568"))
+ static const char *broken[] = {
+#ifdef CONFIG_ROCKCHIP_ERRATUM_3568002
+ "rockchip,rk3566", "rockchip,rk3568",
+#endif
+ "intel,socfpga-agilex5",
+ NULL,
+ };
+
+ if (!of_machine_compatible_match(broken))
return false;
gfp_flags_quirk |= GFP_DMA32;
@@ -4968,14 +4975,12 @@ static const struct gic_quirk its_quirks[] = {
.property = "dma-noncoherent",
.init = its_set_non_coherent,
},
-#ifdef CONFIG_ROCKCHIP_ERRATUM_3568002
{
- .desc = "ITS: Rockchip erratum RK3568002",
+ .desc = "ITS: Broken GIC600 integration limited to 32bit",
.iidr = 0x0201743b,
.mask = 0xffffffff,
- .init = its_enable_rk3568002,
+ .init = its_enable_32bit_disaster,
},
-#endif
{
}
};
--
Without deviation from the norm, progress is not possible.
prev parent reply other threads:[~2025-07-04 11:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-07-04 8:49 [PATCH v2 0/1] irqchip/gic-v3: Add Altera Agilex5 address bus adrianhoyin.ng
2025-07-04 8:49 ` [PATCH v2 1/1] irqchip/gic-v3: Add Altera Agilex5 address bus width limitation workaround adrianhoyin.ng
2025-07-04 11:29 ` Marc Zyngier [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=861pqwb3dy.wl-maz@kernel.org \
--to=maz@kernel.org \
--cc=adrianhoyin.ng@altera.com \
--cc=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.