[PATCH net-next] net: phy: probe PHY drivers synchronously

[Heiner Kallweit <hkallweit1@gmail.com>]

If we have scenarios like

mdiobus_register()
	-> loads PHY driver module(s)
	-> registers PHY driver(s)
	-> may schedule async probe
phydev = mdiobus_get_phy()
<phydev action involving PHY driver>

or

phydev = phy_device_create()
	-> loads PHY driver module
	-> registers PHY driver
	-> may schedule async probe
<phydev action involving PHY driver>

then we expect the PHY driver to be bound to the phydev when triggering
the action. This may not be the case in case of asynchronous probing.
Therefore ensure that PHY drivers are probed synchronously.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
---
 drivers/net/phy/phy_device.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d6024b678..ac2784192 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -2575,6 +2575,7 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner)
 	new_driver->mdiodrv.driver.probe = phy_probe;
 	new_driver->mdiodrv.driver.remove = phy_remove;
 	new_driver->mdiodrv.driver.owner = owner;
+	new_driver->mdiodrv.driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
 
 	retval = driver_register(&new_driver->mdiodrv.driver);
 	if (retval) {
-- 
2.26.0