All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philipp Reisner <philipp.reisner@linbit.com>
To: drbd-announce@lists.linux.dev
Subject: drbd-9.2.21-rc.2 and drbd-9.3.5-rc.2
Date: Wed, 11 Nov 2026 17:32:42 +0100	[thread overview]
Message-ID: <867bij8h1x.fsf@linbit.com> (raw)

Hi,

here is the DRBD-9.3.5-rc.2 release. I decided on a second release
candidate, as things did not calm down over the last week, which you
want before a release.

I am now targeting next week for the final release.

This is a release candidate. Please test it.


9.3.5-rc.2 (api:genl2/proto:86-101,118-125/transport:23)
--------
 * Serve changed block tracking on the drbd netlink family too, so that
   it works on kernels without the drbd2 family (before 6.2)
 * All fixes from 9.2.21-rc.2
  - Fix a sync source running out of memory when the sync target
    requests faster than it can read: a target with rs-discard-granularity
    keeps its requests within max-buffers, and the source allocates the
    pages of a resync read only when it submits the read
  - Fix resyncs in opposite directions stopping for good with
    max-parallel-resyncs: only the requesting side takes a slot
  - Fix an attaching node waiting in WFBitMapT forever while its peer
    decided there is nothing to sync
  - Fix a failed local write-zeroes leaving the old data on a disk that
    stays UpToDate
  - Fix auto-promote giving up long before auto-promote-timeout
  - Fix disconnect: the peer going to NetworkFailure instead of
    Disconnecting, and "drbdadm disconnect" failing with -18 when the
    peer tears down first
  - Fix TLS: two nodes stalling in the handshake until the TLS timeout,
    and going StandAlone when the peer resets the connection during the
    handshake
  - Fix a use-after-free of the rdma control timer on teardown
  - Fix the build on kernels before 4.17 (RHEL 7) and with Linux 7.4,
    and the send buffer not growing during a resync on Linux 7.4

9.3.5-rc.1 (api:genl2/proto:86-101,118-125/transport:23)
--------
 * Track changed blocks for incremental backups: a tracking bitmap slot
   records every write to the backing device; cbt-flush and cbt-start
   bracket a snapshot taken while I/O is suspended on all nodes
 * suspend-io now also waits for the barrier ack of the last epoch, so
   that with protocols A and B the writes are on the peers' stable
   storage too; flush-to-peers=no skips that wait
 * Add rdma2, a new RDMA transport that moves all data with one-sided
   RDMA-WRITE, sends bios zero-copy, and fails over to a surviving path
   when a link goes down
 * Serve the new drbd2 netlink family next to the drbd family
 * Optionally serve DRBD 8.4 userland over the netlink family at version
   1 (CONFIG_DRBD_NL_DRBD1, rpmbuild --with nl_drbd1,
   DEB_BUILD_OPTIONS=nl_drbd1); off by default
 * Fix lb-tcp skipping a path for good after the peer closed it first
   during a disconnect, which starved every later handshake
 * Fix spurious and racy "bitmap locked" warnings when bitmap operations
   on different peer slots run concurrently
 * All fixes from 9.2.21-rc.1
  - Fix a resync target staying Inconsistent with nothing left to sync:
    when the Primary cannot reach the sync source, after aborting a weak
    sync source, and when P_RS_CANCEL_AHEAD overtakes the Ahead state
    change
  - Fix a reconciliation resync target waiting in WFBitMapT forever, and
    out-of-sync bits from before a lost diskless Primary being dropped at
    equal dagtags
  - Fix a peer's connect-time upgrade from Outdated going unnoticed,
    which left writes unreplicated
  - Fix an Outdated sync source being marked UpToDate after a resync
    with failed blocks
  - Fix the day0 slots, a regression in 9.2.20: forget-peer left a slot
    that the next UUID bump filled with a later generation, and a peer
    created from the day0 UUID could be refused as unrelated data;
    attach repairs such meta data
  - Fix promoting a peer that holds an older generation of the data a
    diskless Primary exposes
  - Fix P_OUT_OF_SYNC: never sent for Primaries with node-id 8 or higher,
    a crash after del-peer of a Primary, and writes left pending for a
    peer that lost its connection
  - Fix the activity log: AL updates turned off while a crashed Primary
    resyncs, the superblock written too late on "al-updates no", and the
    in-core AL not written when AL updates come back on
  - Fix a dry-run connect (--tentative) establishing the connection
    without a resync
  - Fix the last close returning before the peers have the last write on
    stable storage, and auto-demote failing on a pending signal
  - Fix call-pri-lost-after-sb killing the receiver instead of demoting
  - Fix online resize: drain application I/O before the commit and before
    a participant replies, cache the peers' size answers per volume, and
    refuse a too small peer while syncing from a larger one
  - Fix a receiver deadlock at the end of a resync when the link fails
    while the bitmap is written, and bound the memory a bitmap write-out
    holds
  - Fix resync pacing: the fixed resync-rate (c-plan-ahead 0) holds, the
    resync queue at the backing device is bounded so application I/O does
    not wait behind it, and DRBD logs when max-buffers or c-max-rate
    limit a resync
  - Fix connect and disconnect issues: a spurious NetworkFailure right
    after a handshake, a stale ping timeout dropping the next connect, a
    peer's close while connecting taken as a network error, ko-count 0
    being counted down, and a second peer accepted beside a DRBD 8.4 peer
  - Fix lb-tcp: a NULL pointer dereference in the receiver, a CPU spin
    when the peer closes mid-payload, zero-length data chunks, hot-adding
    paths, and listeners left on unused paths
  - Fix rdma: use-after-free and refcount underflows on teardown during
    connect, a 60 s hang after a failed establish, going StandAlone on an
    interrupted connect, and a crash with a peer running rdma2
  - Fix the TLS handshake compat code (upstream fixes): leaks, refcount
    and use-after-free bugs, and a missing admin check on DONE
  - Fix memory corruption by peer_device flags on 32-bit kernels
  - Fix a negative ap-in-flight after a resend, BarrierAck count warnings,
    sending on after a send failed, and an unsent packet flushed at
    disconnect ("Wrong magic value" on the peer)
  - Fix attach hanging after the node was a verify target, and a double
    release when linking the holder fails
  - Show the submit and sent ages of requests in debugfs again, and mark
    peer writes that completed locally
  - Fix building SUSE KMPs on SLES 16, and the build with
    CONFIG_DRBD_TIMING_STATS


https://pkg.linbit.com//downloads/drbd/9/drbd-9.3.5-rc.2.tar.gz
https://github.com/LINBIT/drbd/commit/c75ff4bfd35ffd5eb18d9c785fcfda36b1d6bd35

https://pkg.linbit.com//downloads/drbd/9/drbd-9.2.21-rc.2.tar.gz
https://github.com/LINBIT/drbd/commit/0b6dd9039687fe61ae449cb5a2b1b6e7b5b9a4e7

cheers,
 Phil

                 reply	other threads:[~2026-11-11 16:32 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=867bij8h1x.fsf@linbit.com \
    --to=philipp.reisner@linbit.com \
    --cc=drbd-announce@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.